Package: apt Priority: important Section: base Installed-Size: 3344 Maintainer: APT Development Team Architecture: arm Version: 0.5.24osso1 Replaces: libapt-pkg-doc (<< 0.3.7), libapt-pkg-dev (<< 0.3.7) Provides: libapt-pkg-libc6.3-5-3.3 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libstdc++5 (>= 1:3.3.3-1) Suggests: aptitude | synaptic | gnome-apt | wajig, dpkg-dev, apt-doc Filename: pool//maemo/ossw/a/apt/apt_0.5.24osso1_arm.deb Size: 1178042 MD5sum: 97ff74071d356d36b2592fb0a607305c Description: Advanced front-end for dpkg This is Debian's next generation front-end for the dpkg package manager. It provides the apt-get utility and APT dselect method that provides a simpler, safer way to install and upgrade packages. . APT features complete installation ordering, multiple source capability and several other unique features, see the Users Guide in apt-doc. Package: archtunjo Priority: optional Section: unknown Installed-Size: 16 Maintainer: unknown Architecture: arm Version: 0.0.8-4 Depends: lessertunjo0, libc6 (>= 2.3.2.ds1-4), libgconf2-6 (>= 2.6.4), libglib2.0-0 (>= 2.6.0) Filename: pool//maemo/ossw/a/archtunjo/archtunjo_0.0.8-4_arm.deb Size: 3886 MD5sum: a4ddddeafe24992da490c407f0f6f28a Description: the D-BUS wrapper for games D-BUS wrapper required by the non-glib rames to run easily. Can be used in any non-glib application which has it's own mainloop. Package: libatk1.0-0 Priority: optional Section: libs Installed-Size: 196 Maintainer: Akira TAGOH Architecture: arm Source: atk1.0 Version: 1.6.1-3 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libglib2.0-0 (>= 2.4.1) Recommends: libatk1.0-data Filename: pool//maemo/ossw/a/atk1.0/libatk1.0-0_1.6.1-3_arm.deb Size: 65784 MD5sum: 91feb2d806cb9bf85a0e92441973de58 Description: The ATK accessibility toolkit ATK is a toolkit providing accessibility interfaces for applications or other toolkits. By implementing these interfaces, those other toolkits or applications can be used with tools such as screen readers, magnifiers, and other alternative input devices. . This is the runtime part of ATK, needed to run applications built with it. Package: libatk1.0-dev Priority: optional Section: libdevel Installed-Size: 392 Maintainer: Akira TAGOH Architecture: arm Source: atk1.0 Version: 1.6.1-3 Replaces: libatk0-dev, libatk-dev Depends: libatk1.0-0 (= 1.6.1-3), pkg-config, libglib2.0-dev (>= 2.4.1-2) Conflicts: libatk0-dev, libatk-dev Filename: pool//maemo/ossw/a/atk1.0/libatk1.0-dev_1.6.1-3_arm.deb Size: 70254 MD5sum: e7c37207982074446610a82b3e07fb64 Description: Development files for the ATK accessibility toolkit ATK is a toolkit providing accessibility interfaces for applications or other toolkits. By implementing these interfaces, those other toolkits or applications can be used with tools such as screen readers, magnifiers, and other alternative input devices. . These are the development files for ATK, needed for compilation of programs or toolkits which use it. Package: libaudiofile-dev Priority: optional Section: libdevel Installed-Size: 412 Maintainer: Daniel Kobras Architecture: arm Source: audiofile Version: 0.2.6-3osso4 Replaces: libaudiofile0 (<= 0.2.3-4) Depends: libaudiofile0 (= 0.2.6-3osso4), libc6-dev Conflicts: libaudiofile0 (<= 0.2.3-4) Filename: pool//maemo/ossw/a/audiofile/libaudiofile-dev_0.2.6-3osso4_arm.deb Size: 106032 MD5sum: cef19189568bc53bb19dea40431b7c0c Description: Open-source version of SGI's audiofile library (header files) The audiofile library allows the processing of audio data to and from audio files of many common formats (currently AIFF, AIFF-C, WAVE, NeXT/Sun, BICS, and raw data). . This package contains the development headers and library files needed to compile programs using libaudiofile, as well as example programs for identifying and converting audio files. Package: libaudiofile0 Priority: optional Section: libs Installed-Size: 196 Maintainer: Daniel Kobras Architecture: arm Source: audiofile Version: 0.2.6-3osso4 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1) Filename: pool//maemo/ossw/a/audiofile/libaudiofile0_0.2.6-3osso4_arm.deb Size: 66226 MD5sum: 1d4938765c6928f1c7296cbf2031fab9 Description: Open-source version of SGI's audiofile library The audiofile library allows the processing of audio data to and from audio files of many common formats (currently AIFF, AIFF-C, WAVE, NeXT/Sun, BICS, and raw data). . This package contains the library needed to run executables using libaudiofile. Package: base-files Essential: yes Priority: required Section: base Installed-Size: 352 Maintainer: Santiago Vila Architecture: arm Version: 3.1.osso1 Replaces: base, miscutils, libreadline, libreadlineg2 (<< 2.1-16), bash (<< 2.03-3) Provides: base Depends: awk Filename: pool//maemo/ossw/b/base-files/base-files_3.1.osso1_arm.deb Size: 33338 MD5sum: ed7f071cdabdadfd09c202e8d13debde Description: Debian base system miscellaneous files This package contains the basic filesystem hierarchy of a Debian system, and several important miscellaneous files, such as /etc/debian_version, /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, /etc/nsswitch.conf, and others, and the text of several common licenses in use on Debian systems. Package: base-passwd Essential: yes Priority: required Section: base Installed-Size: 132 Maintainer: Colin Watson Architecture: arm Version: 3.5.7 Replaces: base Depends: libc6 (>= 2.3.2.ds1-4) Filename: pool//maemo/ossw/b/base-passwd/base-passwd_3.5.7_arm.deb Size: 32438 MD5sum: c16d59178f721b1c89ecb6507249952e Description: Debian base system master password and group files These are the canonical master copies of the user database files (/etc/passwd and /etc/group), containing the Debian-allocated user and group IDs. The update-passwd tool is provided to keep the system databases synchronized with these master files. Package: bash Essential: yes Priority: required Section: base Installed-Size: 1256 Maintainer: Matthias Klose Architecture: arm Source: bash (2.05b-2-14) Version: 2.05b-14 Replaces: bash-doc (<= 2.05-1), bash-completion Depends: base-files (>= 2.1.12) Pre-Depends: libc6 (>= 2.3.2.ds1-4), libncurses5 (>= 5.3.20030510-1) Suggests: bash-doc Conflicts: bash-completion Filename: pool//maemo/ossw/b/bash/bash_2.05b-14_arm.deb Size: 620738 MD5sum: 469dc174d6db5158696b001d74756c67 Description: The GNU Bourne Again SHell Bash is an sh-compatible command language interpreter that executes commands read from the standard input or from a file. Bash also incorporates useful features from the Korn and C shells (ksh and csh). . Bash is ultimately intended to be a conformant implementation of the IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2). . Included in the bash package is the Programmable Completion Code, by Ian Macdonald. Package: binutils Priority: standard Section: devel Installed-Size: 5628 Maintainer: James Troup Architecture: arm Version: 2.14.90.0.7-6 Provides: elf-binutils Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1) Suggests: binutils-doc (= 2.14.90.0.7-6) Conflicts: gas, elf-binutils, modutils (<< 2.4.19-1) Filename: pool//maemo/ossw/b/binutils/binutils_2.14.90.0.7-6_arm.deb Size: 2289090 MD5sum: 77eed0707713a0b9c8b96fb8ca7f6377 Description: The GNU assembler, linker and binary utilities The programs in this package are used to assemble, link and manipulate binary and object files. They may be used in conjunction with a compiler and various libraries to build programs. Package: bluez-hcidump Priority: extra Section: admin Installed-Size: 160 Maintainer: Edd Dumbill Architecture: arm Version: 1.17-1 Depends: libbluetooth1 (>= 2.15), libc6 (>= 2.3.2.ds1-4) Filename: pool//maemo/ossw/b/bluez-hcidump/bluez-hcidump_1.17-1_arm.deb Size: 47464 MD5sum: a38fe555bfeb2d6cfe3836e584b08f10 Description: Analyses Bluetooth HCI packets The hcidump utility allows the monitoring of Bluetooth activity. It provides a disassembly of the Bluetooth traffic and can display packets from higher level protocols such as RFCOMM, SDP and BNEP. . hcidump is part of the BlueZ Bluetooth Linux project. For more information see http://bluez.sf.net/. Package: libbluetooth1-dev Priority: extra Section: libdevel Installed-Size: 272 Maintainer: Edd Dumbill Architecture: arm Source: bluez-libs Version: 2.15-2osso1 Replaces: libsdp2-dev (<= 1.5.2) Provides: libbluetooth-dev Depends: libbluetooth1 (= 2.15-2osso1), libc6-dev | libc-dev Conflicts: libbluetooth-dev, libsdp2-dev (<= 1.5.2), bluez-pan Filename: pool//maemo/ossw/b/bluez-libs/libbluetooth1-dev_2.15-2osso1_arm.deb Size: 55226 MD5sum: 89631b22517b8b4c008616b74badb698 Description: Development files for using the BlueZ Linux Bluetooth library BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source project distributed under GNU General Public License (GPL). . More information is available at http://bluez.sourceforge.net/ Package: libbluetooth1 Priority: optional Section: libs Installed-Size: 120 Maintainer: Edd Dumbill Architecture: arm Source: bluez-libs Version: 2.15-2osso1 Replaces: libsdp2 (<= 1.5-2) Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1) Conflicts: libsdp2 (<= 1.5-2) Filename: pool//maemo/ossw/b/bluez-libs/libbluetooth1_2.15-2osso1_arm.deb Size: 31324 MD5sum: 8c8e956cc397ca215e3296127eae6713 Description: Library to use the BlueZ Linux Bluetooth stack BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source project distributed under GNU General Public License (GPL). . More information is available at http://bluez.sourceforge.net/ Package: bluez-pin Priority: optional Section: net Installed-Size: 304 Maintainer: Phil Blundell Architecture: arm Version: 0.24-1 Depends: dbus-1 (>= 0.23.1), dbus-glib-1 (>= 0.23.1), libatk1.0-0 (>= 1.6.0), libbluetooth1 (>= 2.15), libc6 (>= 2.3.2.ds1-4), libgconf2-6 (>= 2.6.4), libglade2-0 (>= 1:2.3.6), libglib2.0-0 (>= 2.6.0), libgtk2.0-0 (>= 1:2.4.4-8), libpango1.0-0 (>= 1.6.0), libxml2 (>= 2.6.7), zlib1g (>= 1:1.2.1) Filename: pool//maemo/ossw/b/bluez-pin/bluez-pin_0.24-1_arm.deb Size: 18052 MD5sum: 614e775543e89c9e6fecfbd4470cd732 Description: Bluetooth PIN helper with D-BUS support Bluez-pin provides a user interface for entering the PIN codes needed when pairing one Bluetooth device with another. Package: bluez-utils Priority: optional Section: admin Installed-Size: 516 Maintainer: Edd Dumbill Architecture: arm Version: 2.15-1 Replaces: bluez-sdp (<= 1.5-2), bluez-pan Depends: dbus-1 (>= 0.23.1), libbluetooth1 (>= 2.15), libc6 (>= 2.3.2.ds1-4), libusb-0.1-4 (>= 1:0.1.8), sysvinit (>= 2.80-1), modutils | module-init-tools, bluez-pin Suggests: python-gtk2, python2.2, bluez-firmware Conflicts: bluez-sdp (<= 1.5-2), bluez-pan Filename: pool//maemo/ossw/b/bluez-utils/bluez-utils_2.15-1_arm.deb Size: 147972 MD5sum: 9429f481eeafc7fe8621db657e77a244 Description: Bluetooth tools and daemons This package contains tools and system daemons for using Bluetooth devices. . BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source project distributed under GNU General Public License (GPL). . More information is available at http://bluez.sourceforge.net/ Package: bsdmainutils Priority: important Section: utils Installed-Size: 612 Maintainer: Graham Wilson Architecture: arm Version: 6.0.11 Replaces: bsdutils (<< 3.0-0) Depends: libc6 (>= 2.3.2.ds1-4), libncurses5 (>= 5.3.20030510-1), debconf (>= 0.5), bsdutils (>= 3.0-0), debianutils (>= 1.8) Suggests: cpp, wenglish | wordlist, whois, vacation Conflicts: textutils (<< 2.0-1), suidmanager (<< 0.50) Filename: pool//maemo/ossw/b/bsdmainutils/bsdmainutils_6.0.11_arm.deb Size: 167340 MD5sum: ca807d507f974d085f7031bcfaafe9b6 Description: collection of more utilities from FreeBSD This package contains lots of small programs many people expect to find when they use a BSD-style Unix system. . Included are: banner, ncal, cal, calendar, col, colcrt, colrm, column, from, hexdump, look, lorder, ul, write. . This package used to contain whois and vacation, which are now distributed in their own packages. Also here was tsort, which is now in the "coreutils" package. Package: build-essential Priority: optional Section: devel Installed-Size: 48 Maintainer: Scott James Remnant Architecture: arm Version: 10 Depends: libc6-dev | libc-dev, gcc (>= 3:3.3), g++ (>= 3:3.3), make, dpkg-dev (>= 1.4.1.19) Filename: pool//maemo/ossw/b/build-essential/build-essential_10_arm.deb Size: 6460 MD5sum: df66c7ad7396963705a439dc2c07c968 Description: informational list of build-essential packages If you do not plan to build Debian packages, you don't need this package. Moreover this package is not required for building Debian packages. . This package contains an informational list of packages which are considered essential for building Debian packages. This package also depends on the packages on that list, to make it easy to have the build-essential packages installed. . If you have this package installed, you only need to install whatever a package specifies as its build-time dependencies to build the package. Conversely, if you are determining what your package needs to build-depend on, you can always leave out the packages this package depends on. . This package is NOT the definition of what packages are build-essential; the real definition is in the Debian Policy Manual. This package contains merely an informational list, which is all most people need. However, if this package and the manual disagree, the manual is correct. Package: libbz2-1.0 Priority: optional Section: libs Installed-Size: 116 Maintainer: Philippe Troin Architecture: arm Source: bzip2 Version: 1.0.2-1 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.2-1) Suggests: libbz2-dev, bzip2 Filename: pool//maemo/ossw/b/bzip2/libbz2-1.0_1.0.2-1_arm.deb Size: 38564 MD5sum: bf32253eb0533d406de3b5fdf7016616 Description: A high-quality block-sorting file compressor library - runtime This package contains libbzip2 which is used by the bzip2 compressor. Package: coreutils Essential: yes Priority: required Section: base Installed-Size: 7208 Maintainer: Michael Stone Architecture: arm Version: 5.0.91-2osso2 Replaces: textutils, shellutils, fileutils, stat, debianutils (<= 2.3.1) Provides: textutils, shellutils, fileutils Pre-Depends: libc6 (>= 2.3.2.ds1-4) Conflicts: stat Filename: pool//maemo/ossw/c/coreutils/coreutils_5.0.91-2osso2_arm.deb Size: 2421962 MD5sum: 2b5b2401dc7938042bdd2b10878494c5 Description: The GNU core utilities This package contains the essential basic system utilities. . Specifically, this package includes: basename cat chgrp chmod chown chroot cksum comm cp csplit cut date dd df dir dircolors dirname du echo env expand expr factor false fmt fold groups head hostid id install join link ln logname ls md5sum mkdir mkfifo mknod mv nice nl nohup od paste pathchk pinky pr printenv printf ptx pwd readlink rm rmdir sha1sum seq shred sleep sort split stat stty sum sync tac tail tee test touch tr true tsort tty uname unexpand uniq unlink users vdir wc who whoami yes Package: cpio Priority: important Section: utils Installed-Size: 176 Maintainer: Brian Mays Architecture: arm Version: 2.5-1.1 Replaces: cpio-mt Depends: libc6 (>= 2.3.1-1) Conflicts: mt-st(<<0.6), cpio-mt Filename: pool//maemo/ossw/c/cpio/cpio_2.5-1.1_arm.deb Size: 64432 MD5sum: f5777427e26a733401c256be284b820f Description: GNU cpio -- a program to manage archives of files. GNU cpio is a tool for creating and extracting archives, or copying files from one place to another. It handles a number of cpio formats as well as reading and writing tar files. Package: dash Priority: optional Section: shells Installed-Size: 184 Maintainer: Herbert Xu Architecture: arm Version: 0.4.25 Pre-Depends: libc6 (>= 2.3.2.ds1-4) Filename: pool//maemo/ossw/d/dash/dash_0.4.25_arm.deb Size: 81056 MD5sum: 2b58508313073da7b3ac7c870ea306bf Description: The Debian Almquist Shell "dash" is a POSIX compliant shell that is much smaller than "bash". We take advantage of that by making it the shell on the installation root floppy, where space is at a premium. . It can be usefully installed as /bin/sh (because it executes scripts somewhat faster than "bash"), or as the default shell either of root or of a second user with a userid of 0 (because it depends on fewer libraries, and is therefore less likely to be affected by an upgrade problem or a disk failure). It is also useful for checking that a script uses only POSIX syntax. . "bash" is a better shell for most users, since it has some nice features absent from "dash", and is a required part of the system. Package: libdb4.0 Priority: standard Section: libs Installed-Size: 696 Maintainer: Matthew Wilcox Architecture: arm Source: db4.0 Version: 4.0.14-1.4 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1) Conflicts: libdb2 (<< 2:2.7.7-3) Filename: pool//maemo/ossw/d/db4.0/libdb4.0_4.0.14-1.4_arm.deb Size: 289476 MD5sum: 12dba97ceffe4ea7e8e98a5c13eef947 Description: Berkeley v4.0 Database Libraries [runtime] This is the runtime package for programs that use the Berkeley v4.0 database library. Package: libdb4.2 Priority: standard Section: libs Installed-Size: 860 Maintainer: Debian Berkeley DB Maintainers Architecture: arm Source: db4.2 Version: 4.2.52-16 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1) Conflicts: libdb2 (<< 2:2.7.7-3) Filename: pool//maemo/ossw/d/db4.2/libdb4.2_4.2.52-16_arm.deb Size: 367652 MD5sum: 335840514a9436ba5416a9ea2328aa5b Description: Berkeley v4.2 Database Libraries [runtime] This is the runtime package for programs that use the v4.2 Berkeley database library. Package: dbus-1-dev Priority: optional Section: libdevel Installed-Size: 580 Maintainer: D-Bus Maintainance Team Architecture: arm Source: dbus Version: 0.23.1-osso5 Replaces: libdbus0-dev Depends: dbus-1 (= 0.23.1-osso5), pkg-config Filename: pool//maemo/ossw/d/dbus/dbus-1-dev_0.23.1-osso5_arm.deb Size: 230768 MD5sum: 375b6fd3ec2005af63ef8e9421715364 Description: simple interprocess messaging system (development headers) D-BUS is a message bus, used for sending messages between applications. Conceptually, it fits somewhere in between raw sockets and CORBA in terms of complexity. . See the dbus-1 description for more information about D-BUS in general. Package: dbus-1-utils Priority: optional Section: utils Installed-Size: 164 Maintainer: D-Bus Maintainance Team Architecture: arm Source: dbus Version: 0.23.1-osso5 Replaces: dbus-1 (<< 0.20-4) Depends: dbus-1 (>= 0.23.1), dbus-glib-1 (>= 0.23.1), libc6 (>= 2.3.2.ds1-4), libglib2.0-0 (>= 2.6.0), libice6 | xlibs (>> 4.1.0), libsm6 | xlibs (>> 4.1.0), libx11-6 | xlibs (>> 4.1.0), libxau0 Filename: pool//maemo/ossw/d/dbus/dbus-1-utils_0.23.1-osso5_arm.deb Size: 109260 MD5sum: 9ba052aa11461c516d51fc90450942c2 Description: simple interprocess messaging system (utilities) D-BUS is a message bus, used for sending messages between applications. Conceptually, it fits somewhere in between raw sockets and CORBA in terms of complexity. . This package contains several D-BUS related utilities like dbus-launch and dbus-send. . See the dbus-1 description for more information about D-BUS in general. Package: dbus-1 Priority: optional Section: devel Installed-Size: 628 Maintainer: D-Bus Maintainance Team Architecture: arm Source: dbus Version: 0.23.1-osso5 Replaces: libdbus0 Depends: libc6 (>= 2.3.2.ds1-4), libexpat1 (>= 1.95.6), libgcc1 (>= 1:3.3.3-1), adduser, debianutils Conflicts: libdbus0 Filename: pool//maemo/ossw/d/dbus/dbus-1_0.23.1-osso5_arm.deb Size: 310278 MD5sum: 09cca3d0ee26d7ed7ae41cc0479ed1d4 Description: simple interprocess messaging system D-BUS is a message bus, used for sending messages between applications. Conceptually, it fits somewhere in between raw sockets and CORBA in terms of complexity. . D-BUS supports broadcast messages, asynchronous messages (thus decreasing latency), authentication, and more. It is designed to be low-overhead; messages are sent using a binary protocol, not using XML. D-BUS also supports a method call mapping for its messages, but it is not required; this makes using the system quite simple. . D-BUS is still under heavy development, but is expected to be widely used. It comes with several interfaces, including GLib. See the description of dbus-glib-1 for more information about those. Package: dbus-glib-1-dev Priority: optional Section: libdevel Installed-Size: 172 Maintainer: D-Bus Maintainance Team Architecture: arm Source: dbus Version: 0.23.1-osso5 Replaces: libdbus-glib0-dev Depends: dbus-glib-1 (= 0.23.1-osso5), dbus-1-dev (= 0.23.1-osso5), libglib2.0-dev Conflicts: libdbus-glib-dev Filename: pool//maemo/ossw/d/dbus/dbus-glib-1-dev_0.23.1-osso5_arm.deb Size: 112240 MD5sum: bec21b00ba4dc5be7f606ad3278bf144 Description: simple interprocess messaging system (GLib interface) D-BUS is a message bus, used for sending messages between applications. Conceptually, it fits somewhere in between raw sockets and CORBA in terms of complexity. . This package provides a GLib-style interface to D-BUS. . See the dbus-1 description for more information about D-BUS in general. Package: dbus-glib-1 Priority: optional Section: libs Installed-Size: 160 Maintainer: D-Bus Maintainance Team Architecture: arm Source: dbus Version: 0.23.1-osso5 Replaces: libdbus-glib0 Depends: dbus-1 (>= 0.23.1), libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libglib2.0-0 (>= 2.6.0) Conflicts: libdbus-glib0 Filename: pool//maemo/ossw/d/dbus/dbus-glib-1_0.23.1-osso5_arm.deb Size: 109034 MD5sum: a941311cde48f335b67f90efcaa39e2a Description: simple interprocess messaging system (GLib-based shared library) D-BUS is a message bus, used for sending messages between applications. Conceptually, it fits somewhere in between raw sockets and CORBA in terms of complexity. . This package provides the GLib-based shared library for applications using the GLib interface to D-BUS. . See the dbus-1 description for more information about D-BUS in general. Package: debianutils Essential: yes Priority: required Section: base Installed-Size: 228 Maintainer: Clint Adams Architecture: arm Version: 2.8 Replaces: miscutils, cron (<= 3.0pl1-31), tetex-bin (<< 1.0.6-1.1), manpages-fr (<= 0.9.3-1) Pre-Depends: libc6 (>= 2.3.2.ds1-4), coreutils (>= 4.5.8-1) Conflicts: manpages-fr (<= 0.9.3-1) Filename: pool//maemo/ossw/d/debianutils/debianutils_2.8_arm.deb Size: 41780 MD5sum: aa6435983700e8ba02e3f85aeee5a038 Description: Miscellaneous utilities specific to Debian This package provides a number of small utilities which are used primarily by the installation scripts of Debian packages, although you may use them directly. . The specific utilities included are: installkernel mkboot mktemp run-parts savelog sensible-browser sensible-editor sensible-pager tempfile which. Package: desktop-file-utils Priority: optional Section: devel Installed-Size: 344 Maintainer: Ross Burton Architecture: arm Version: 0.9-1osso1 Depends: libc6 (>= 2.3.2.ds1-4), libglib2.0-0 (>= 2.4.1), libpopt0 (>= 1.7) Filename: pool//maemo/ossw/d/desktop-file-utils/desktop-file-utils_0.9-1osso1_arm.deb Size: 117636 MD5sum: 924fb9c7ca0a03b9f3bf4a605e6ea06d Description: Utilities for .desktop files Some utilities to make dealing with .desktop files easier: * update-desktop-database -- update the desktop-MIME mapping * desktop-file-validate -- validate a desktop file * desktop-file-install -- install a desktop file, munging en route. * desktop-menu-tool -- manipulate a desktop file Package: diffstat Priority: optional Section: devel Installed-Size: 80 Maintainer: Greg Norris Architecture: arm Version: 1.34-1 Depends: libc6 (>= 2.3.2.ds1-4) Filename: pool//maemo/ossw/d/diffstat/diffstat_1.34-1_arm.deb Size: 15114 MD5sum: 75423bc7a6008897052084a0b501026a Description: produces graph of changes introduced by a diff file This program is a simple that reads the output of the 'diff' program, and produces a histogram of the total number of lines that were changed. It is useful for scanning a patch file to see which files were changed. Package: dnsmasq Priority: optional Section: net Installed-Size: 252 Maintainer: Simon Kelley Architecture: arm Version: 2.8-1osso Depends: netbase, libc6 (>= 2.3.2.ds1-4) Suggests: resolvconf Conflicts: pdnsd Filename: pool//maemo/ossw/d/dnsmasq/dnsmasq_2.8-1osso_arm.deb Size: 86124 MD5sum: 1c7931bafe532c0886b2a93476e96a9b Description: A small caching DNS proxy and DHCP server. Dnsmasq is lightweight, easy to configure DNS forwarder and DHCP server. It is designed to provide DNS and, optionally, DHCP, to a small network. It can serve the names of local machines which are not in the global DNS. The DHCP server integrates with the DNS server and allows machines with DHCP-allocated addresses to appear in the DNS with names configured either in each host or in a central configuration file. Dnsmasq supports static and dynamic DHCP leases and BOOTP for network booting of diskless machines. Package: docbook-to-man Priority: optional Section: text Installed-Size: 252 Maintainer: W. Borgert Architecture: arm Version: 1:2.0.0-9.1 Replaces: docbook-to-man-ans Provides: docbook-to-man-ans Depends: libc6 (>= 2.3.2.ds1-4), docbook, docbook-stylesheets, sp Conflicts: docbook-to-man-ans Filename: pool//maemo/ossw/d/docbook-to-man/docbook-to-man_2.0.0-9.1_arm.deb Size: 74576 MD5sum: 6526e645e034297766a870a53dd3e2d5 Description: Converter from DocBook SGML into roff -man macros. The docbook-to-man tool is a batch converter that transforms UNIX-style manpages from the DocBook SGML DTD into nroff/troff -man macros. This is not the original version by Fred Dalrymple, but one with the ANS modifications by David Bolen. Package: dosfstools Priority: optional Section: otherosfs Installed-Size: 88 Maintainer: Roman Hodek Architecture: arm Version: 2.8-1osso Replaces: mkdosfs Depends: libc6 (>= 2.3.2.ds1-4) Conflicts: mkdosfs Filename: pool//maemo/ossw/d/dosfstools/dosfstools_2.8-1osso_arm.deb Size: 26216 MD5sum: ac710cf9cf9af820e067f9ffcd5e80bb Description: Utilities to create and check MS-DOS FAT filesystems Inside of this package there are two utilities to create and to check MS-DOS FAT filesystems on either harddisks or floppies under Linux. This version uses the enhanced boot sector/superblock format of DOS 3.3+ as well as provides a default dummy boot sector code. Package: doxygen Priority: optional Section: devel Installed-Size: 3496 Maintainer: Luca Filipozzi Architecture: arm Version: 1.3.7-0.2 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libstdc++5 (>= 1:3.3.3-1) Suggests: doxygen-doc, doxygen-gui, graphviz Filename: pool//maemo/ossw/d/doxygen/doxygen_1.3.7-0.2_arm.deb Size: 1330406 MD5sum: aa5183a3cc44193b06ff54030e3e9a2c Description: Documentation system for C, C++ and IDL Doxygen is a documentation system for C, C++ and IDL. It can generate an on-line class browser (in HTML) and/or an off-line reference manual (in LaTeX) from a set of documented source files. There is also support for generating man pages and for converting the generated output into Postscript, hyperlinked PDF or compressed HTML. The documentation is extracted directly from the sources. Package: dpkg Essential: yes Priority: required Section: base Installed-Size: 3060 Maintainer: Dpkg Development Architecture: arm Version: 1.10.21osso1 Replaces: dpkg-doc-ja, dpkg-static, manpages-de (<= 0.4-3) Pre-Depends: libc6 (>= 2.3.2.ds1-4) Conflicts: sysvinit (<< 2.82-1), dpkg-iasearch (<< 0.11), dpkg-static, dpkg-dev (<< 1.10) Filename: pool//maemo/ossw/d/dpkg/dpkg_1.10.21osso1_arm.deb Size: 1087460 MD5sum: 53bbcb87f175f7e78f4e493a182feae0 Description: Package maintenance system for Debian This package contains the programs which handle the installation and removal of packages on your system. . The primary interface for the dpkg suite is the `dselect' program; a more low-level and less user-friendly interface is available in the form of the `dpkg' command. . In order to unpack and build Debian source packages you will need to install the developers' package `dpkg-dev' as well as this one. Origin: debian Bugs: debbugs://bugs.debian.org Package: dselect Priority: required Section: base Installed-Size: 396 Maintainer: Dpkg Development Architecture: arm Source: dpkg Version: 1.10.21osso1 Replaces: dpkg (<< 1.10.3) Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libncurses5 (>= 5.4-1), libstdc++5 (>= 1:3.3.3-1) Filename: pool//maemo/ossw/d/dpkg/dselect_1.10.21osso1_arm.deb Size: 102256 MD5sum: 2f699012406bc9e603d5cd773a0bc7a5 Description: a user tool to manage Debian packages dselect is the primary user interface for installing, removing and managing Debian packages. It is a front-end to dpkg. Origin: debian Bugs: debbugs://bugs.debian.org Package: e2fslibs Priority: required Section: libs Installed-Size: 176 Maintainer: Theodore Y. Ts'o Architecture: arm Source: e2fsprogs Version: 1.35-4 Replaces: e2fsprogs (<< 1.34-1) Provides: libext2fs2, libe2p2 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.2-1) Filename: pool//maemo/ossw/e/e2fsprogs/e2fslibs_1.35-4_arm.deb Size: 70582 MD5sum: e31315a85ebc90a72c52965a25133a66 Description: The EXT2 filesystem libraries The ext2fs and e2p libraries are used by programs that directly access EXT2 filesystems from usermode programs. The EXT2 filesystem is very often used as the default filesystem on Linux systems. Various system programs that use libext2fs include e2fsck, mke2fs, tune2fs, etc. Programs that use libe2p include dumpe2fs, chattr, and lsattr. Package: e2fsprogs Essential: yes Priority: required Section: base Installed-Size: 1152 Maintainer: Theodore Y. Ts'o Architecture: arm Version: 1.35-4 Pre-Depends: e2fslibs (= 1.35-4), libblkid1 (>= 1.34-1), libc6 (>= 2.3.2.ds1-4), libcomerr2 (>= 1.34-1), libss2 (>= 1.34-1), libuuid1 (>= 1.34-1) Suggests: gpart, parted, e2fsck-static Conflicts: dump (<< 0.4b4-4), quota (<< 1.55-8.1), initscripts (<< 2.85-4) Filename: pool//maemo/ossw/e/e2fsprogs/e2fsprogs_1.35-4_arm.deb Size: 434232 MD5sum: de4f601a5240c3b7bcd2c2597a3c61ba Description: The EXT2 file system utilities and libraries EXT2 stands for "Extended Filesystem", version 2. It's the main filesystem type used for hard disks on Debian and other Linux systems. . This package contains programs for creating, checking, and maintaining EXT2 filesystems, and the generic `fsck' wrapper. Package: libblkid1 Priority: required Section: libs Installed-Size: 112 Maintainer: Theodore Y. Ts'o Architecture: arm Source: e2fsprogs Version: 1.35-4 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.2-1) Filename: pool//maemo/ossw/e/e2fsprogs/libblkid1_1.35-4_arm.deb Size: 35576 MD5sum: d77153946e9efa2969ebd1b533712490 Description: Block device id library The blkid library which allows system programs like fsck and mount to quickly and easily find block devices by filesystem UUID and LABEL. This allows system administrators to avoid specifiying filesystems by hard-coded device names, but via a logical naming system instead. Package: libcomerr2 Priority: required Section: libs Installed-Size: 72 Maintainer: Theodore Y. Ts'o Architecture: arm Source: e2fsprogs Version: 1.35-4 Replaces: e2fsprogs (<< 1.34-1) Provides: libcomerr-kth-compat Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.2-1) Filename: pool//maemo/ossw/e/e2fsprogs/libcomerr2_1.35-4_arm.deb Size: 23002 MD5sum: 0fabf7a5567855af6397a75cc491b8df Description: The Common Error Description library libcomerr is an attempt to present a common error-handling mechanism to manipulate the most common form of error code in a fashion that does not have the problems identified with mechanisms commonly in use. Package: libss2 Priority: required Section: libs Installed-Size: 84 Maintainer: Theodore Y. Ts'o Architecture: arm Source: e2fsprogs Version: 1.35-4 Replaces: e2fsprogs (<< 1.34-1) Depends: libcomerr2 Filename: pool//maemo/ossw/e/e2fsprogs/libss2_1.35-4_arm.deb Size: 28370 MD5sum: c27f1738a728928b607317ce4b0b7631 Description: Command-line interface parsing library This package includes a tool that parses a command table to generate a simple command-line interface parser, the include files needed to compile and use it, and the static libs. . It was originally inspired by the Multics SubSystem library. Package: libuuid1 Priority: required Section: libs Installed-Size: 100 Maintainer: Theodore Y. Ts'o Architecture: arm Source: e2fsprogs Version: 1.35-4 Replaces: e2fsprogs (<< 1.34-1) Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.2-1) Filename: pool//maemo/ossw/e/e2fsprogs/libuuid1_1.35-4_arm.deb Size: 27534 MD5sum: 7f51154bbaa4f6f5cd02480a9c1d34b7 Description: Universally unique id library libuuid generates and parses 128-bit universally unique id's (UUID's), using a standard which is blessed by both Microsoft and DCE, and is being proposed as an internet standard. See the internet-draft: . draft-leach-uuids-guids-01.txt . for more information. Package: libexpat1-dev Priority: optional Section: libdevel Installed-Size: 408 Maintainer: Debian XML/SGML Group Architecture: arm Source: expat Version: 1.95.6-8 Provides: libexpat-dev Depends: libexpat1 (= 1.95.6-8), libc6-dev | libc-dev Conflicts: libexpat-dev Filename: pool//maemo/ossw/e/expat/libexpat1-dev_1.95.6-8_arm.deb Size: 112862 MD5sum: 124ab3027df8e93120e76a75a7b68744 Description: XML parsing C library - development kit This package contains the header file and development libraries of expat, the C library for parsing XML. Expat is a stream oriented XML parser. This means that you register handlers with the parser prior to starting the parse. These handlers are called when the parser discovers the associated structures in the document being parsed. A start tag is an example of the kind of structures for which you may register handlers. Package: libexpat1 Priority: optional Section: libs Installed-Size: 172 Maintainer: Debian XML/SGML Group Architecture: arm Source: expat Version: 1.95.6-8 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.2-1) Filename: pool//maemo/ossw/e/expat/libexpat1_1.95.6-8_arm.deb Size: 49576 MD5sum: 7eba03a5eaeb2d184706ba870040dd9c Description: XML parsing C library - runtime library This package contains the runtime, shared library of expat, the C library for parsing XML. Package: fakeroot-net Priority: optional Section: utils Installed-Size: 216 Maintainer: Timo Savola Architecture: arm Version: 0.9.6-1 Replaces: fakeroot Provides: fakeroot Depends: libc6 (>= 2.3.2.ds1-4) Conflicts: fakeroot Filename: pool//maemo/ossw/f/fakeroot-net/fakeroot-net_0.9.6-1_arm.deb Size: 60206 MD5sum: d9e269cb92dce04463cbe8b3c83fbd34 Description: Gives a fake root environment This package is intended to enable something like: dpkg-buildpackage -rfakeroot i.e. to remove the need to become root for a package build. This is done by setting LD_PRELOAD to libfakeroot.so, which provides wrappers around getuid, chown, chmod, mknod, stat, ..., thereby creating a fake root environment. . If you don't understand any of this, you do not need fakeroot! . This is a special network-enabled version of fakeroot. Package: file Priority: standard Section: utils Installed-Size: 96 Maintainer: Michael Piefel Architecture: arm Version: 4.07-2 Depends: libmagic1 (= 4.07-2), libc6 (>= 2.3.2.ds1-4), libmagic1, zlib1g (>= 1:1.2.1) Filename: pool//maemo/ossw/f/file/file_4.07-2_arm.deb Size: 25528 MD5sum: 8f4d81bf2719062d5a09164e035ac9f0 Description: Determines file type using "magic" numbers File tests each argument in an attempt to classify it. There are three sets of tests, performed in this order: filesystem tests, magic number tests, and language tests. The first test that succeeds causes the file type to be printed. . Starting with version 4, the file command is not much more than a wrapper around the "magic" library. Package: libmagic1 Priority: standard Section: libs Installed-Size: 1256 Maintainer: Michael Piefel Architecture: arm Source: file Version: 4.07-2 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.2-1), zlib1g (>= 1:1.2.1) Suggests: file Conflicts: file (<= 4) Filename: pool//maemo/ossw/f/file/libmagic1_4.07-2_arm.deb Size: 211496 MD5sum: 7615c26617a9b1e432899658c5637ef2 Description: File type determination library using "magic" numbers This library can be used to classify files according to magic number tests. It implements the core functionality of the file command. Package: findutils Essential: yes Priority: required Section: base Installed-Size: 608 Maintainer: Andreas Metzler Architecture: arm Version: 4.1.20-3 Pre-Depends: libc6 (>= 2.3.2.ds1-4) Filename: pool//maemo/ossw/f/findutils/findutils_4.1.20-3_arm.deb Size: 153936 MD5sum: 1bce0851fd838cce003502df8df3ed7d Description: utilities for finding files--find, xargs, and locate These utilities find files meeting specified criteria and perform various actions on the files which are found. Package: flex Priority: standard Section: devel Installed-Size: 760 Maintainer: Manoj Srivastava Architecture: arm Version: 2.5.31-24 Depends: libc6 (>= 2.3.2.ds1-4), m4 Recommends: c-compiler Suggests: bison Filename: pool//maemo/ossw/f/flex/flex_2.5.31-24_arm.deb Size: 270514 MD5sum: 839beec9a185433e4b559f4edcd7b7cd Description: A fast lexical analyzer generator. flex is a tool for generating scanners: programs which recognized lexical patterns in text. flex reads the given input files for a description of a scanner to generate. The description is in the form of pairs of regular expressions and C code, called rules. flex generates as output a C source file, lex.yy.c, which defines a routine yylex(). This file is compiled and linked with the -lfl library to produce an executable. When the executable is run, it analyzes its input for occurrences of the regular expressions. Whenever it finds one, it executes the corresponding C code. . The behaviour of Flex has undergone a major change since version 2.5.4a; Flex scanners are now reenterant, you may have multiple scanners in the same program with differing sets of defaults, and they play nicer with modern C and C++ compilers. The Flip side is that Flex no longer conforms to the POSIX lex behaviour, and the scanners require conforming implementations when flex is used in ANSI C mode. The package flex-old provides the older behaviour. . This product includes software developed by the University of California, Berkeley and its contributors. The upstream source code can be found at http://prdownloads.sourceforge.net/lex/flex-2.5.31.tar.bz2?download The project web page is at http://lex.sf.net/ Package: fontconfig Priority: optional Section: libs Installed-Size: 720 Maintainer: Jakub Pavelek Architecture: arm Version: 2.3.2-1osso3 Depends: libc6 (>= 2.3.2.ds1-4), libfontconfig1 (>= 2.3.2-1osso3), libfreetype6 (>= 2.1.9-1osso), libfontconfig1 (>= 2.2.96-1osso), gconf2 Filename: pool//maemo/ossw/f/fontconfig/fontconfig_2.3.2-1osso3_arm.deb Size: 219968 MD5sum: 7230a3e9da78bdf1129d8c85533bbfc4 Description: generic font configuration library Fontconfig is a font configuration and customization library, which does not depend on the X Window System. It is designed to locate fonts within the system and select them according to requirements specified by applications. . Fontconfig is not a rasterization library, nor does it impose a particular rasterization library on the application. The X-specific library 'Xft' uses fontconfig along with freetype to specify and rasterize fonts. . This package contains a program to maintain the fontconfig cache (fc-cache), and a sample program to list installed fonts (fc-list). Package: libfontconfig1 Priority: optional Section: libs Installed-Size: 220 Maintainer: Jakub Pavelek Architecture: arm Source: fontconfig Version: 2.3.2-1osso3 Depends: libc6 (>= 2.3.2.ds1-4), libexpat1 (>= 1.95.6), libfreetype6 (>= 2.1.9-1osso8), libgcc1 (>= 1:3.3.3-1), zlib1g (>= 1:1.2.1), libfreetype6 (>= 2.1.9-1osso) Filename: pool//maemo/ossw/f/fontconfig/libfontconfig1_2.3.2-1osso3_arm.deb Size: 83650 MD5sum: 6020f92fb81984ff1c3eeef5725b3fdd Description: generic font configuration library (shared library) Fontconfig is a font configuration and customization library, which does not depend on the X Window System. It is designed to locate fonts within the system and select them according to requirements specified by applications. Package: libfontconfig1-dbg Priority: optional Section: libs Installed-Size: 756 Maintainer: Jakub Pavelek Architecture: arm Source: fontconfig Version: 2.3.2-1osso3 Depends: libfreetype6 (>= 2.1.9-1osso), libfontconfig1 Filename: pool//maemo/ossw/f/fontconfig/libfontconfig1-dbg_2.3.2-1osso3_arm.deb Size: 254900 MD5sum: 1d7873c9fcf4c53cdaa7ee55ed10ea1d Description: Debugging symbols for the Xft. This one goes to /usr/lib/debug and shadows the /usr/lib/ shared libraries. Package: libfontconfig1-dev Priority: optional Section: libs Installed-Size: 1472 Maintainer: Jakub Pavelek Architecture: arm Source: fontconfig Version: 2.3.2-1osso3 Depends: libfontconfig1 (>= 2.2.96-1osso), libfreetype6-dev (>= 2.1.9-1osso), libexpat1-dev Conflicts: libfontconfig-dev, fontconfig (<< 2.1-5) Filename: pool//maemo/ossw/f/fontconfig/libfontconfig1-dev_2.3.2-1osso3_arm.deb Size: 183104 MD5sum: 14c5b5a795f04d009fdcf1b709ac2a14 Description: Development package for Fontconfig. Headers and documentation. Package: libfreetype6 Priority: optional Section: libs Installed-Size: 440 Maintainer: Jakub Pavelek Architecture: arm Source: freetype Version: 2.1.9-1osso10 Depends: zlib1g Filename: pool//maemo/ossw/f/freetype/libfreetype6_2.1.9-1osso10_arm.deb Size: 210672 MD5sum: 5b013822e979d35390090bd2e9b3cff9 Description: FreeType 2 font engine, shared library files The FreeType project is a team of volunteers who develop free, portable and high-quality software solutions for digital typography. They specifically target embedded systems and focus on bringing small, efficient and ubiquitous products. Package: libfreetype6-dev Priority: optional Section: libs Installed-Size: 2160 Maintainer: Jakub Pavelek Architecture: arm Source: freetype Version: 2.1.9-1osso10 Depends: libfreetype6 (>= 2.1.9-1osso1), zlib1g-dev Filename: pool//maemo/ossw/f/freetype/libfreetype6-dev_2.1.9-1osso10_arm.deb Size: 452546 MD5sum: 629c419f3a5343a6e519229954edf56c Description: Development package for Freetype2. Package: libfreetype6-dbg Priority: optional Section: libs Installed-Size: 1592 Maintainer: Jakub Pavelek Architecture: arm Source: freetype Version: 2.1.9-1osso10 Depends: libfreetype6, zlib1g Filename: pool//maemo/ossw/f/freetype/libfreetype6-dbg_2.1.9-1osso10_arm.deb Size: 600318 MD5sum: 14bd4a402340ca344b8b8973928f91a2 Description: Debugging symbols for Freetype2 Package: gawk Priority: optional Section: interpreters Installed-Size: 1848 Maintainer: James Troup Architecture: arm Version: 1:3.1.3-3 Provides: awk Pre-Depends: libc6 (>= 2.3.2.ds1-4) Filename: pool//maemo/ossw/g/gawk/gawk_3.1.3-3_arm.deb Size: 879914 MD5sum: 396198a41a54f3a3ff646a5c1487508d Description: GNU awk, a pattern scanning and processing language `awk', a program that you can use to select particular records in a file and perform operations upon them. . Gawk is the GNU Project's implementation of the AWK programming language. It conforms to the definition of the language in the POSIX 1003.2 Command Language And Utilities Standard. This version in turn is based on the description in The AWK Programming Language, by Aho, Kernighan, and Weinberger, with the additional features defined in the System V Release 4 version of UNIX awk. Gawk also provides more recent Bell Labs awk extensions, and some GNU-specific extensions. Package: g77-3.3 Priority: optional Section: devel Installed-Size: 3432 Maintainer: Debian GCC maintainers Architecture: arm Source: gcc-3.3 (1:3.3.3ds6-5) Version: 1:3.3.3-5 Provides: fortran77-compiler Depends: gcc-3.3-base, libg2c0, libc6 (>= 2.3.2.ds1-4), gcc-3.3 (>= 1:3.3.3), gcc-3.3 (<< 1:3.3.4) Suggests: g77-3.3-doc Conflicts: g77-2.95, g77-3.0, g77-3.2 Filename: pool//maemo/ossw/g/gcc-3.3/g77-3.3_3.3.3-5_arm.deb Size: 1509212 MD5sum: 049313ed91facceff7ebd22223a1d2aa Description: The GNU Fortran 77 compiler This is the GNU g77 Fortran compiler, which compiles Fortran 77 on platforms supported by the gcc compiler. It uses the gcc backend to generate optimized code. Package: cpp-3.3 Priority: standard Section: interpreters Installed-Size: 2700 Maintainer: Debian GCC maintainers Architecture: arm Source: gcc-3.3 (1:3.3.3ds6-5) Version: 1:3.3.3-5 Depends: gcc-3.3-base (>= 1:3.3.3), gcc-3.3-base (<< 1:3.3.4), libc6 (>= 2.3.2.ds1-4) Filename: pool//maemo/ossw/g/gcc-3.3/cpp-3.3_3.3.3-5_arm.deb Size: 1273640 MD5sum: e97126f83928b12778b11e31933a66f6 Description: The GNU C preprocessor A macro processor that is used automatically by the GNU C compiler to transform programs before actual compilation. . This package has been separated from gcc for the benefit of those who require the preprocessor but not the compiler. Package: libg2c0 Priority: optional Section: libs Installed-Size: 148 Maintainer: Debian GCC maintainers Architecture: arm Source: gcc-3.3 (1:3.3.3ds6-5) Version: 1:3.3.3-5 Depends: gcc-3.3-base, libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1) Filename: pool//maemo/ossw/g/gcc-3.3/libg2c0_3.3.3-5_arm.deb Size: 49530 MD5sum: 12133fae28775a9f32e8bbe5675d0448 Description: Runtime library for GNU Fortran 77 applications Library needed for GNU Fortran 77 applications linked against the shared library. Package: libgcc1 Priority: required Section: libs Installed-Size: 136 Maintainer: Debian GCC maintainers Architecture: arm Source: gcc-3.3 (1:3.3.3ds6-5) Version: 1:3.3.3-5 Depends: libc6 (>= 2.3.2.ds1-4) Filename: pool//maemo/ossw/g/gcc-3.3/libgcc1_3.3.3-5_arm.deb Size: 72008 MD5sum: 5d40520dd982987a02db6b751f8853c6 Description: GCC support library Shared version of the support library, a library of internal subroutines that GCC uses to overcome shortcomings of particular machines, or special needs for some languages. Package: gcc-3.3 Priority: standard Section: devel Installed-Size: 4244 Maintainer: Debian GCC maintainers Architecture: arm Source: gcc-3.3 (1:3.3.3ds6-5) Version: 1:3.3.3-5 Provides: c-compiler Depends: gcc-3.3-base, libgcc1 (>= 1:3.3.3), libc6 (>= 2.3.2.ds1-4), cpp-3.3 (>= 1:3.3.3), cpp-3.3 (<< 1:3.3.4), binutils (>= 2.13.90.0.10) Recommends: libc6-dev (>= 2.3.1) Suggests: gcc-3.3-doc (>= 1:3.3.3) Conflicts: gcc-3.2 (<= 1:3.2.3-0pre8) Filename: pool//maemo/ossw/g/gcc-3.3/gcc-3.3_3.3.3-5_arm.deb Size: 1543820 MD5sum: 0369dd8571920e0b69d58e1f085a1b68 Description: The GNU C compiler This is the GNU C compiler, a fairly portable optimizing compiler for C. Package: gcc-3.3-base Priority: required Section: devel Installed-Size: 196 Maintainer: Debian GCC maintainers Architecture: arm Source: gcc-3.3 (1:3.3.3ds6-5) Version: 1:3.3.3-5 Filename: pool//maemo/ossw/g/gcc-3.3/gcc-3.3-base_3.3.3-5_arm.deb Size: 145828 MD5sum: e5e827779a9468f1d353f6e0f4ae252a Description: The GNU Compiler Collection (base package) This package contains files common to all languages and libraries contained in the GNU Compiler Collection (GCC). Package: fixincludes Priority: optional Section: devel Installed-Size: 292 Maintainer: Debian GCC maintainers Architecture: arm Source: gcc-3.3 (1:3.3.3ds6-5) Version: 1:3.3.3-5 Depends: gcc-3.3-base, libc6 (>= 2.3.2.ds1-4), gcc-3.3 (>= 1:3.3.3), gcc-3.3 (<< 1:3.3.4) Filename: pool//maemo/ossw/g/gcc-3.3/fixincludes_3.3.3-5_arm.deb Size: 62030 MD5sum: e995f2e682beeacfecd83aab08ec2608 Description: Fix non-ANSI header files FixIncludes was created to fix non-ANSI system header files. Many system manufacturers supply proprietary headers that are not ANSI compliant. The GNU compilers cannot compile non-ANSI headers. Consequently, the FixIncludes shell script was written to fix the header files. . Not all packages with header files are installed at gccs build time Package: libstdc++5-3.3-dev Priority: standard Section: libdevel Installed-Size: 4708 Maintainer: Debian GCC maintainers Architecture: arm Source: gcc-3.3 (1:3.3.3ds6-5) Version: 1:3.3.3-5 Provides: libstdc++-dev Depends: gcc-3.3-base, libstdc++5 (>= 1:3.3.3), libc6-dev (>= 2.3.1), g++-3.3 (>= 1:3.3.3) Suggests: libstdc++5-3.3-doc, stl-manual Conflicts: libg++27-dev, libg++272-dev (<< 2.7.2.8-1), libstdc++2.8-dev, libg++2.8-dev, libstdc++2.9-dev, libstdc++2.9-glibc2.1-dev, libstdc++2.10-dev (<< 1:2.95.3-2), libstdc++3.0-dev, libstdc++5-dev (<= 1:3.2.3-0pre3) Filename: pool//maemo/ossw/g/gcc-3.3/libstdc++5-3.3-dev_1%3a3.3.3-5_arm.deb Size: 840218 MD5sum: 04562996ba92c9c322e294bf597cdad3 Description: The GNU Standard C++ Library v3 (development files) This package contains the headers and static library files necessary for building C++ programs which use libstdc++. Be advised that this only works with the GNU C++ compiler (version 3.0), and no earlier library will work it. . libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which was included up to g++-2.95. The first version of libstdc++-v3 appeared in g++-3.0. Package: libstdc++5 Priority: required Section: base Installed-Size: 944 Maintainer: Debian GCC maintainers Architecture: arm Source: gcc-3.3 (1:3.3.3ds6-5) Version: 1:3.3.3-5 Depends: gcc-3.3-base, libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1) Filename: pool//maemo/ossw/g/gcc-3.3/libstdc++5_3.3.3-5_arm.deb Size: 309358 MD5sum: fc161822c37658033fceac9e388c2940 Description: The GNU Standard C++ Library v3 This package contains an additional runtime library for C++ programs built with the GNU compiler. . libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which was included up to g++-2.95. The first version of libstdc++-v3 appeared in g++-3.0. Package: libstdc++5-3.3-dev Priority: standard Section: libdevel Installed-Size: 4708 Maintainer: Debian GCC maintainers Architecture: arm Source: gcc-3.3 (1:3.3.3ds6-5) Version: 1:3.3.3-5 Provides: libstdc++-dev Depends: gcc-3.3-base, libstdc++5 (>= 1:3.3.3), libc6-dev (>= 2.3.1), g++-3.3 (>= 1:3.3.3) Suggests: libstdc++5-3.3-doc, stl-manual Conflicts: libg++27-dev, libg++272-dev (<< 2.7.2.8-1), libstdc++2.8-dev, libg++2.8-dev, libstdc++2.9-dev, libstdc++2.9-glibc2.1-dev, libstdc++2.10-dev (<< 1:2.95.3-2), libstdc++3.0-dev, libstdc++5-dev (<= 1:3.2.3-0pre3) Filename: pool//maemo/ossw/g/gcc-3.3/libstdc++5-3.3-dev_3.3.3-5_arm.deb Size: 840218 MD5sum: 04562996ba92c9c322e294bf597cdad3 Description: The GNU Standard C++ Library v3 (development files) This package contains the headers and static library files necessary for building C++ programs which use libstdc++. Be advised that this only works with the GNU C++ compiler (version 3.0), and no earlier library will work it. . libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which was included up to g++-2.95. The first version of libstdc++-v3 appeared in g++-3.0. Package: g++-3.3 Priority: standard Section: devel Installed-Size: 3356 Maintainer: Debian GCC maintainers Architecture: arm Source: gcc-3.3 (1:3.3.3ds6-5) Version: 1:3.3.3-5 Replaces: gcc (<= 2.7.2.3-3) Provides: c++-compiler Depends: gcc-3.3-base, libc6 (>= 2.3.2.ds1-4), gcc-3.3 (>= 1:3.3.3), gcc-3.3 (<< 1:3.3.4), libstdc++5-3.3-dev (>= 1:3.3.3) Suggests: gcc-3.3-doc (>= 1:3.3.3) Filename: pool//maemo/ossw/g/gcc-3.3/g++-3.3_3.3.3-5_arm.deb Size: 1653198 MD5sum: 5798e407b3c3985ac5195c879c6c2381 Description: The GNU C++ compiler This is the GNU C++ compiler, a fairly portable optimizing compiler for C++. Package: gcc Priority: standard Section: devel Installed-Size: 60 Maintainer: Debian GCC maintainers Architecture: arm Source: gcc-defaults (1.14) Version: 4:3.3.3-2 Provides: c-compiler Depends: cpp (>= 4:3.3.3-2), gcc-3.3 (>= 1:3.3.3-1), cpp-3.3 (>= 1:3.3.3-1) Recommends: libc-dev Suggests: make, manpages-dev, autoconf, automake, libtool, flex, bison, gdb, gcc-doc Conflicts: gcc-doc (<< 1:2.95.3) Filename: pool//maemo/ossw/g/gcc-defaults/gcc_3.3.3-2_arm.deb Size: 4846 MD5sum: 71066e7c197b3d0ccee6045d6c82af1d Description: The GNU C compiler This is the GNU C compiler, a fairly portable optimizing compiler for C. . This is a dependency package providing the default GNU C compiler. Package: cpp Priority: standard Section: interpreters Installed-Size: 84 Maintainer: Debian GCC maintainers Architecture: arm Source: gcc-defaults (1.14) Version: 4:3.3.3-2 Depends: cpp-3.3 (>= 1:3.3.3-1) Suggests: cpp-doc Conflicts: cpp-doc (<< 1:2.95.3) Filename: pool//maemo/ossw/g/gcc-defaults/cpp_3.3.3-2_arm.deb Size: 26358 MD5sum: 6a11689ab7f00af8c493d798bd053057 Description: The GNU C preprocessor (cpp) The GNU C preprocessor is a macro processor that is used automatically by the GNU C compiler to transform programs before actual compilation. . This package has been separated from gcc for the benefit of those who require the preprocessor but not the compiler. . This is a dependency package providing the default GNU C preprocessor. Package: g++ Priority: standard Section: devel Installed-Size: 40 Maintainer: Debian GCC maintainers Architecture: arm Source: gcc-defaults (1.14) Version: 4:3.3.3-2 Provides: c++-compiler Depends: cpp (>= 4:3.3.3-2), gcc (>= 4:3.3.3-2), g++-3.3 (>= 1:3.3.3-1), gcc-3.3 (>= 1:3.3.3-1) Filename: pool//maemo/ossw/g/gcc-defaults/g++_3.3.3-2_arm.deb Size: 1398 MD5sum: 1ec6fd697936fb33768112afbdcd3b22 Description: The GNU C++ compiler This is the GNU C++ compiler, a fairly portable optimizing compiler for C++. . This is a dependency package providing the default GNU C++ compiler. Package: gconf2 Priority: optional Section: admin Installed-Size: 1044 Maintainer: Kimmo Hamalainen Architecture: arm Version: 2.6.4-3.1osso13 Replaces: libgconf2-4 (<< 1.1.10-2) Depends: dbus-1 (>= 0.23.1), dbus-glib-1 (>= 0.23.1), libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libgconf2-6 (>= 2.6.4), libglib2.0-0 (>= 2.6.0), libpopt0 (>= 1.7), libxml2 (>= 2.6.7), zlib1g (>= 1:1.2.1) Conflicts: gconf (<< 1.0.6-4), libgconf11 (<< 1.0.9-2.1) Filename: pool//maemo/ossw/g/gconf2/gconf2_2.6.4-3.1osso13_arm.deb Size: 229436 MD5sum: 6104405f15db9ea8d11c54d0f17a6dd4 Description: GNOME configuration database system. (daemon and tools, for GNOME2) GConf is a configuration database system, functionally similar to the Windows registry but lots better. :-) It's being written for the GNOME desktop but does not require GNOME. . This package contains gconfd daemon and gconf tools binaries for GNOME2 Package: libgconf2-6 Priority: optional Section: libs Installed-Size: 128 Maintainer: Kimmo Hamalainen Architecture: arm Source: gconf2 Version: 2.6.4-3.1osso13 Replaces: libgconf2-2 (= 1.1.7-1), libgconf2-4 (<< 1.1.10-2) Depends: dbus-1 (>= 0.23.1), dbus-glib-1 (>= 0.23.1), libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libglib2.0-0 (>= 2.6.0), gconf2 (>= 2.6.4-3.1osso13) Conflicts: libgconf2-2 (= 1.1.7-1), libgconf2-4 (<< 1.1.10-2) Filename: pool//maemo/ossw/g/gconf2/libgconf2-6_2.6.4-3.1osso13_arm.deb Size: 47822 MD5sum: 03fe7109b464453ad6101b4e717ecc5d Description: GNOME configuration database system libraries (for GNOME2) GConf is a configuration database system, functionally similar to the Windows registry but lots better. :-) It's being written for the GNOME desktop but does not require GNOME. . This package contains shared libraries for GNOME2 Package: libgconf2-dev Priority: optional Section: devel Installed-Size: 248 Maintainer: Kimmo Hamalainen Architecture: arm Source: gconf2 Version: 2.6.4-3.1osso13 Depends: libgconf2-6 (= 2.6.4-3.1osso13), libglib2.0-dev, libpopt-dev, dbus-glib-1-dev (>= 0.22), gconf2 (>= 2.6.4-3.1osso13) Filename: pool//maemo/ossw/g/gconf2/libgconf2-dev_2.6.4-3.1osso13_arm.deb Size: 72360 MD5sum: 67ec69db2c2147205c1daa84159fa7fa Description: GNOME configuration database system development files. (for GNOME2) GConf is a configuration database system, functionally similar to the Windows registry but lots better. :-) It's being written for the GNOME desktop but does not require GNOME . This package contains development files for GNOME2 Package: gdb Priority: standard Section: devel Installed-Size: 3028 Maintainer: Daniel Jacobowitz Architecture: arm Version: 6.0-6 Replaces: gdb-arm Depends: libc6 (>= 2.3.2.ds1-4), libncurses5 (>= 5.3.20030510-1), libreadline4 (>= 4.3-1) Conflicts: gdb-arm Filename: pool//maemo/ossw/g/gdb/gdb_6.0-6_arm.deb Size: 1690072 MD5sum: e9f9d7c10149a852f1e520897ca409ad Description: The GNU Debugger GDB is a source-level debugger, capable of breaking programs at any specific line, displaying variable values, and determining where errors occurred. Currently, it works for C, C++, Fortran Modula 2 and Java programs. A must-have for any serious programmer. Package: libgdbm3 Priority: standard Section: base Installed-Size: 72 Maintainer: James Troup Architecture: arm Source: gdbm Version: 1.8.3-2 Depends: libc6 (>= 2.3.2-1), libgcc1 (>= 1:3.3.1-1) Filename: pool//maemo/ossw/g/gdbm/libgdbm3_1.8.3-2_arm.deb Size: 21454 MD5sum: 00b5aa54a1e62106df6cb89c3fe3ea5e Description: GNU dbm database routines (runtime version) GNU dbm ('gdbm') is a library of database functions that use extendible hashing and works similarly to the standard UNIX 'dbm' functions. . The basic use of 'gdbm' is to store key/data pairs in a data file, thus providing a persistent version of the 'dictionary' Abstract Data Type ('hash' to perl programmers). Package: gettext-base Priority: standard Section: base Installed-Size: 780 Maintainer: Santiago Vila Architecture: arm Source: gettext Version: 0.14.1-2 Replaces: gettext (<= 0.12.1-1) Provides: libasprintf0, libgettextpo0 Depends: libc6 (>= 2.3.2.ds1-4) Filename: pool//maemo/ossw/g/gettext/gettext-base_0.14.1-2_arm.deb Size: 90400 MD5sum: 537c26a756ed6b5cd3bd8cd3d54e5e06 Description: GNU Internationalization utilities for the base system This package includes the gettext and ngettext programs which allow other packages to internationalize the messages given by shell scripts. Package: gettext Priority: optional Section: devel Installed-Size: 4660 Maintainer: Santiago Vila Architecture: arm Version: 0.14.1-2 Provides: libasprintf-dev, libgettextpo-dev Depends: libc6 (>= 2.3.2.ds1-4), gettext-base Suggests: cvs Filename: pool//maemo/ossw/g/gettext/gettext_0.14.1-2_arm.deb Size: 1550018 MD5sum: bba388c81e592efda7f4e2a566fed38a Description: GNU Internationalization utilities Interesting for authors or maintainers of other packages or programs which they want to see internationalized. Package: libglib2.0-0 Priority: optional Section: libs Installed-Size: 980 Maintainer: Sebastien Bacher Architecture: arm Source: glib2.0 Version: 2.6.2-1osso6 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1) Recommends: libglib2.0-data Filename: pool//maemo/ossw/g/glib2.0/libglib2.0-0_2.6.2-1osso6_arm.deb Size: 449428 MD5sum: 847f9fe1afc8ad1b4bb3d034dda2431d Description: The GLib library of C routines GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package contains the shared libraries. Package: libglib2.0-dev Priority: optional Section: libdevel Installed-Size: 3588 Maintainer: Sebastien Bacher Architecture: arm Source: glib2.0 Version: 2.6.2-1osso6 Replaces: libglib1.3-dev Depends: libglib2.0-0 (= 2.6.2-1osso6), libc6-dev | libc-dev, pkg-config (>= 0.14.0) Suggests: libglib2.0-doc Conflicts: libglib1.3-dev Filename: pool//maemo/ossw/g/glib2.0/libglib2.0-dev_2.6.2-1osso6_arm.deb Size: 844658 MD5sum: 5de6beffaa64336fb25a86c3a3ec8c05 Description: Development files for the GLib library GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package is needed to compile programs against libglib2.0-0, as only it includes the header files and static libraries (optionally) needed for compiling. Package: libc6-dev Priority: standard Section: libdevel Installed-Size: 8868 Maintainer: GNU Libc Maintainers Architecture: arm Source: glibc Version: 2.3.2.ds1-12.osso2+str Replaces: man-db (<= 2.3.10-41), gettext (<= 0.10.26-1), ppp (<= 2.2.0f-24), libgdbmg1-dev (<= 1.7.3-24), ldso (<= 1.9.11-9), netkit-rpc, netbase (<< 4.0), kerberos4th-dev (<< 1.2.2-10) Provides: libc-dev Depends: libc6 (= 2.3.2.ds1-12.osso2+str), linux-kernel-headers Recommends: c-compiler Suggests: glibc-doc, manpages-dev Conflicts: libstdc++2.10-dev (<< 1:2.95.2-15), gcc-2.95 (<< 1:2.95.3-8), libc6-dev (<< 2.0.110-1), locales (<< 2.1.3-5), netkit-rpc, libc-dev Filename: pool//maemo/ossw/g/glibc/libc6-dev_2.3.2.ds1-12.osso2+str_arm.deb Size: 2804486 MD5sum: 13ef36a79db5ac6febc9fd001098076b Description: GNU C Library: Development Libraries and Header Files Contains the symlinks, headers, and object files needed to compile and link programs which use the standard C library. Package: libc6 Priority: required Section: base Installed-Size: 5964 Maintainer: GNU Libc Maintainers Architecture: arm Source: glibc Version: 2.3.2.ds1-12.osso2+str Replaces: ldso (<= 1.9.11-9), timezone, timezones, gconv-modules, libtricks, netkit-rpc, netbase (<< 4.0) Provides: glibc-2.3.2.ds1-12.osso2+str Suggests: locales, glibc-doc Conflicts: strace (<< 4.0-0), libnss-db (<= 2.2-6.1.1), timezone, timezones, gconv-modules, libtricks, libc6-doc, netkit-rpc, wine (<< 0.0.20031118-1), cyrus-imapd (<< 1.5.19-15) Filename: pool//maemo/ossw/g/glibc/libc6_2.3.2.ds1-12.osso2+str_arm.deb Size: 2029734 MD5sum: e2f1341ca6c241a36427d487e377a954 Description: GNU C Library: Shared libraries and Timezone data Contains the standard libraries that are used by nearly all programs on the system. This package includes shared versions of the standard C library and the standard math library, as well as many others. Timezone data is also included. Package: grep Essential: yes Priority: required Section: base Installed-Size: 640 Maintainer: Ryan M. Golbeck Architecture: arm Version: 2.5.1.ds1-2 Provides: rgrep Pre-Depends: libc6 (>= 2.3.2.ds1-4) Conflicts: rgrep Filename: pool//maemo/ossw/g/grep/grep_2.5.1.ds1-2_arm.deb Size: 162278 MD5sum: 4b12a8d3950e65c7405ce076c0c5ef67 Description: GNU grep, egrep and fgrep 'grep' is a utility to search for text in files; it can be used from the command line or in scripts. Even if you don't want to use it, other packages on your system probably will. . The GNU family of grep utilities may be the "fastest grep in the west". GNU grep is based on a fast lazy-state deterministic matcher (about twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper search for a fixed string that eliminates impossible text from being considered by the full regexp matcher without necessarily having to look at every character. The result is typically many times faster than Unix grep or egrep. (Regular expressions containing backreferencing will run more slowly, however.) Package: groff-base Priority: important Section: text Installed-Size: 2408 Maintainer: Colin Watson Architecture: arm Source: groff Version: 1.18.1-15 Replaces: groff (<< 1.17.2-17), jgroff (<< 1.17-1) Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.2-1), libstdc++5 (>= 1:3.3.2-1) Suggests: groff Conflicts: groff (<< 1.17-1), jgroff (<< 1.17-1), pmake (<< 1.45-7), troffcvt (<< 1.04-14) Filename: pool//maemo/ossw/g/groff/groff-base_1.18.1-15_arm.deb Size: 821142 MD5sum: bf0974d35888ae82dd3e3aa8944d7398 Description: GNU troff text-formatting system (base system components) This package contains the traditional UN*X text formatting tools troff, nroff, tbl, eqn, and pic. These utilities, together with the man-db package, are essential for displaying the on-line manual pages. . groff-base is a stripped-down package containing the necessary components to read manual pages in ASCII, Latin-1, and UTF-8, plus the PostScript device (groff's default). Users who want a full groff installation, with the standard set of devices, fonts, macros, and documentation, should install the groff package. Package: gtk-doc-tools Priority: optional Section: gnome Installed-Size: 564 Maintainer: Sebastian Rittau Architecture: arm Source: gtk-doc Version: 1.1-2 Depends: perl, jade (>= 1.2.1-35), docbook-dsssl, docbook-xsl, docbook-to-man, xsltproc, gnome-common Conflicts: sgml2x (<< 1.0.0-2) Filename: pool//maemo/ossw/g/gtk-doc/gtk-doc-tools_1.1-2_arm.deb Size: 106024 MD5sum: 9dc2b4aeb7685d4f70bda74d1240721a Description: GTK documentation tools These tools extract documentation embedded in GNOME source code, and produce pretty output via DocBook SGML. Package: gzip Essential: yes Priority: required Section: base Installed-Size: 220 Maintainer: Bdale Garbee Architecture: arm Version: 1.3.5-7 Depends: debianutils (>= 1.6) Pre-Depends: libc6 (>= 2.3.1-1) Filename: pool//maemo/ossw/g/gzip/gzip_1.3.5-7_arm.deb Size: 73800 MD5sum: 7b2b946ab0f81b3321afe968a1703e00 Description: The GNU compression utility This is the standard GNU file compression utility, which is also the default compression tool for Debian. It typically operates on files with names ending in '.gz'. . This package can also decompress '.Z' files created with 'compress'. Package: gtk2.0-examples Priority: extra Section: x11 Installed-Size: 832 Maintainer: Akira TAGOH Architecture: arm Source: gtk+2.0 Version: 2:2.6.4-1.osso7 Replaces: libgtk1.3-dev Depends: libatk1.0-0 (>= 1.6.0), libc6 (>= 2.3.2.ds1-4), libexpat1 (>= 1.95.6), libfontconfig1 (>= 2.3.2-1osso2), libfreetype6 (>= 2.1.9-1osso9), libglib2.0-0 (>= 2.6.0), libgtk2.0-0 (>= 1:2.6.4-0), libpango1.0-0 (>= 1.8.1), libx11-6 | xlibs (>> 4.1.0), libxau0, libxcursor1 (>> 1.1.2), libxext6 | xlibs (>> 4.1.0), libxfixes3, libxft2 (>= 2.1.6-1osso8), libxi6 | xlibs (>> 4.1.0), libxrender1, zlib1g (>= 1:1.2.1) Filename: pool//maemo/ossw/g/gtk+2.0/gtk2.0-examples_2.6.4-1.osso7_arm.deb Size: 256852 MD5sum: 1ddeb35ba0235ecb1e4b45af24a85cb7 Description: Examples files for the GTK+ 2.0 The GTK+ is a multi-platform toolkit for creating graphical user interfaces. Offering a complete set of widgets, the GTK+ is suitable for projects ranging from small one-off tools to complete application suites. . This package contains the examples files and a demonstration program for the GTK+-2.0. Package: libgtk2.0-0 Priority: optional Section: libs Installed-Size: 4320 Maintainer: Akira TAGOH Architecture: arm Source: gtk+2.0 Version: 2:2.6.4-1.osso7 Replaces: libgtk2.0-0png3 Depends: libgtk2.0-common (>= 2:2.6.4-1.osso7), libgtk2.0-bin (>= 2:2.6.4-1.osso7), libatk1.0-0 (>= 1.6.0), libc6 (>= 2.3.2.ds1-4), libfontconfig1 (>= 2.3.2-1osso2), libfreetype6 (>= 2.1.9-1osso9), libgcc1 (>= 1:3.3.3-1), libglib2.0-0 (>= 2.6.0), libgtk2.0-0 (>= 1:2.6.4-0), libjpeg62, libpango1.0-0 (>= 1.8.1), libpng12-0 (>= 1.2.5.0-4), libtiff4, libx11-6 | xlibs (>> 4.1.0), libxcursor1 (>> 1.1.2), libxext6 | xlibs (>> 4.1.0), libxfixes3, libxft2 (>= 2.1.6-1osso8), libxi6 | xlibs (>> 4.1.0), libxrender1, zlib1g (>= 1:1.2.1) Conflicts: libgtk2.0-0png3, eog2 (<< 1.0.1-4), gnome-panel2 (<< 2.0.4-1), celestia (<< 1.2.4-4), gimp1.3 (<< 1.3.7-1.1), metatheme (<< 0.9.7-3), libgnomeui-0 (<< 2.0.6-2), gtk2.0-examples (<< 2.2.0), libgdkxft0, gtk2-engines-wonderland (<= 1.0-2), gtk2-engines-cleanice (<= 1.2.8-1), gtk2-engines-thinice (<< 2.6), gtk2-engines-crux (<< 2.6), gtk2-engines-mist (<< 2.6), gtk2-engines-highcontrast (<< 2.6), gtk2-engines-lighthouseblue (<< 2.6), gnome-themes (<< 2.6), gtk2-engines-industrial (<< 0.2.32-5), gtk2-engines-pixbuf (<< 2.2.0-2.1), gtk2-engines-redmond95 (<< 2.2.0-2.1), gtk2-engines-metal (<< 2.2.0-2.1), gtk2-engines-magicchicken (<= 1.1.1-4), gtk2-engines-qtpixmap (<= 0.28-1), gtk2-engines-smooth (<< 0.5.6-3), gtk2-engines-xfce (<= 2.1.8-1), tamil-gtk2im (<= 2.2-4), imhangul (<< 0.9.9-3), librsvg2-common (<< 2.6.3-1) Filename: pool//maemo/ossw/g/gtk+2.0/libgtk2.0-0_2.6.4-1.osso7_arm.deb Size: 2065908 MD5sum: 3367242376cdafa188b745c684a2e53e Description: The GTK+ graphical user interface library The GTK+ is a multi-platform toolkit for creating graphical user interfaces. Offering a complete set of widgets, the GTK+ is suitable for projects ranging from small one-off tools to complete application suites. . This package contains the shared libraries. Package: libgtk2.0-bin Priority: optional Section: misc Installed-Size: 76 Maintainer: Akira TAGOH Architecture: arm Source: gtk+2.0 Version: 2:2.6.4-1.osso7 Replaces: libgtk2.0-common (<= 2.4.0-3), libgtk2.0-dev (<= 2.4.3-1) Depends: libatk1.0-0 (>= 1.6.0), libc6 (>= 2.3.2.ds1-4), libexpat1 (>= 1.95.6), libfontconfig1 (>= 2.3.2-1osso2), libfreetype6 (>= 2.1.9-1osso9), libglib2.0-0 (>= 2.6.0), libgtk2.0-0 (>= 1:2.6.4-0), libpango1.0-0 (>= 1.8.1), libx11-6 | xlibs (>> 4.1.0), libxau0, libxcursor1 (>> 1.1.2), libxext6 | xlibs (>> 4.1.0), libxfixes3, libxft2 (>= 2.1.6-1osso8), libxi6 | xlibs (>> 4.1.0), libxrender1, zlib1g (>= 1:1.2.1) Conflicts: libgtk2.0-dev (<= 2.4.3-1) Filename: pool//maemo/ossw/g/gtk+2.0/libgtk2.0-bin_2.6.4-1.osso7_arm.deb Size: 18132 MD5sum: ff1a64289d4ef0a1b31206d8e79ea1bc Description: The programs for the GTK+ graphical user interface library The GTK+ is a multi-platform toolkit for creating graphical user interfaces. Offering a complete set of widgets, the GTK+ is suitable for projects ranging from small one-off tools to complete application suites. . This package contains the program files which is used for the libraries and others. Package: libgtk2.0-dbg Priority: extra Section: libdevel Installed-Size: 36124 Maintainer: Akira TAGOH Architecture: arm Source: gtk+2.0 Version: 2:2.6.4-1.osso7 Depends: libgtk2.0-0 (= 2:2.6.4-1.osso7) Filename: pool//maemo/ossw/g/gtk+2.0/libgtk2.0-dbg_2.6.4-1.osso7_arm.deb Size: 18941932 MD5sum: 443d98601ffb841b010bfb09e6c3dc31 Description: The GTK+ libraries and debugging symbols The GTK+ is a multi-platform toolkit for creating graphical user interfaces. Offering a complete set of widgets, the GTK+ is suitable for projects ranging from small one-off tools to complete application suites. . This package contains unstripped shared libraries. it is provided primarily to provide a backtrace with names in a debugger, this makes it somewhat easier to interpret core dumps. The libraries are installed in /usr/lib/debug and can be used by placing that directory in LD_LIBRARY_PATH. Most people will not need this package. Package: libgtk2.0-dev Priority: optional Section: libdevel Installed-Size: 34296 Maintainer: Akira TAGOH Architecture: arm Source: gtk+2.0 Version: 2:2.6.4-1.osso7 Replaces: libgtk1.3-dev Depends: libgtk2.0-0 (= 2:2.6.4-1.osso7), libglib2.0-dev (>= 2.6.2-1), libpango1.0-dev (>= 1.8.0-3), libatk1.0-dev (>= 1.6.1-2), libx11-dev | xlibs-dev, libxext-dev | xlibs-dev, pkg-config Suggests: libgtk2.0-doc Conflicts: libgtk1.3-dev Filename: pool//maemo/ossw/g/gtk+2.0/libgtk2.0-dev_2.6.4-1.osso7_arm.deb Size: 6952770 MD5sum: 1b7feeac8bbb8c64e82b406b61ad54ea Description: Development files for the GTK+ library The GTK+ is a multi-platform toolkit for creating graphical user interfaces. Offering a complete set of widgets, the GTK+ is suitable for projects ranging from small one-off tools to complete application suites. . This package contains the header files and static libraries which is needed for developing the GTK+ applications. Package: hostname Essential: yes Priority: required Section: base Installed-Size: 76 Maintainer: Graham Wilson Architecture: arm Version: 2.13 Pre-Depends: libc6 (>= 2.3.2.ds1-4) Filename: pool//maemo/ossw/h/hostname/hostname_2.13_arm.deb Size: 9342 MD5sum: b85c893e970c429336281da958ee6dd4 Description: A utility to set/show the host name or domain name The hostname command can be used to either set or display the current host or domain name of the system. This name is used by many of the networking programs to identify the machine. The domain name is also used by NIS/YP. Package: html2text Priority: optional Section: web Installed-Size: 308 Maintainer: Adrian Bridgett Architecture: arm Version: 1.3.2a-1 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.2-1), libstdc++5 (>= 1:3.3.2-1) Filename: pool//maemo/ossw/h/html2text/html2text_1.3.2a-1_arm.deb Size: 103398 MD5sum: ac90769dda263b5fdbf17ff32920e00f Description: An advanced HTML to text converter html2text was written because the author wasn't happy with the output of "lynx -dump" and so he wrote something better. Package: hildon-base-lib-dev Priority: optional Section: devel Installed-Size: 28 Maintainer: Luc Pionchon Architecture: arm Source: hildon-base-lib Version: 0.8.6-2 Depends: hildon-base-lib0 Filename: pool//maemo/ossw/h/hildon-base-lib/hildon-base-lib-dev_0.8.6-2_arm.deb Size: 4510 MD5sum: 2c0edd7ed0f3659031134e6580776bd6 Description: Hildon Base library development files. Package: hildon-base-lib-test Priority: optional Section: libs Installed-Size: 8 Maintainer: Luc Pionchon Architecture: arm Source: hildon-base-lib Version: 0.8.6-2 Depends: hildon-base-lib0, outo Conflicts: hildon-base-lib (<< 0.8.6) Filename: pool//maemo/ossw/h/hildon-base-lib/hildon-base-lib-test_0.8.6-2_arm.deb Size: 1310 MD5sum: cdb9aad92a0dd08e3a12837372f4f705 Description: Hildon libraries tests. Package: hildon-base-lib0 Priority: optional Section: libs Installed-Size: 28 Maintainer: Luc Pionchon Architecture: arm Source: hildon-base-lib Version: 0.8.6-2 Replaces: hildon-base-lib Depends: libatk1.0-0 (>= 1.6.0), libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libglib2.0-0 (>= 2.6.0), libgtk2.0-0 (>= 1:2.6.4-8), libpango1.0-0 (>= 1.8.1) Conflicts: hildon-base-lib Filename: pool//maemo/ossw/h/hildon-base-lib/hildon-base-lib0_0.8.6-2_arm.deb Size: 4728 MD5sum: d440bb13f5d0deb5bd248599feff2fb0 Description: Hildon Base library Package: hildon-control-panel Priority: optional Section: x11 Installed-Size: 44 Maintainer: Karoliina T Salminen Architecture: arm Version: 0.9.1-1.2 Replaces: hildon-base, hildon-navigator (<= 0.8.10) Depends: dbus-1 (>= 0.23.1), dbus-glib-1 (>= 0.23.1), hildon-base-lib0 (>= 0.8.6-2), hildon-fm1 (>= 0.9.1-1), hildon-lgpl0 (>= 0.9.14-1), hildon-libs0 (>= 0.9.6-2), libatk1.0-0 (>= 1.6.0), libc6 (>= 2.3.2.ds1-4), libexpat1 (>= 1.95.6), libfontconfig1 (>= 2.3.2-1osso3), libfreetype6 (>= 2.1.9-1osso10), libgconf2-6 (>= 2.6.4), libglib2.0-0 (>= 2.6.0), libgtk2.0-0 (>= 1:2.6.4-8), libmatchbox1 (>= 1.7-1), libosso-gnomevfs2-0 (>= 2.8.4.4), libosso-help0 (>= 1.0.01), libosso1 (>= 0.8.9-1), libpango1.0-0 (>= 1.8.1), libpng12-0 (>= 1.2.5.0-4), libx11-6 | xlibs (>> 4.1.0), libxau0, libxext6 | xlibs (>> 4.1.0), libxft2 (>= 2.1.6-1osso8), libxml2 (>= 2.6.7), libxrender1, libxtst6, osso-thumbnail0 (>= 0.3.1-1), zlib1g (>= 1:1.2.1), libmatchbox1 Recommends: hildon-theme-harry, hildon-keyboard, matchbox-window-manager, hildon-base-lib Suggests: hildon-tests Conflicts: hildon-base Filename: pool//maemo/ossw/h/hildon-control-panel/hildon-control-panel_0.9.1-1.2_arm.deb Size: 12156 MD5sum: e29df59d15b7508dd66b5983e9f6614e Description: Hildon Control Panel Package: hildon-control-panel-dev Priority: optional Section: libs Installed-Size: 16 Maintainer: Karoliina T Salminen Architecture: arm Source: hildon-control-panel Version: 0.9.1-1.2 Depends: hildon-control-panel, hildon-base-lib-dev, hildon-libs-dev Filename: pool//maemo/ossw/h/hildon-control-panel/hildon-control-panel-dev_0.9.1-1.2_arm.deb Size: 2838 MD5sum: 3b922b7069f0b5d24afc3274f27e1a7c Description: Hildon Control Panel development files. Package: hildon-fm-dev Priority: optional Section: devel Installed-Size: 52 Maintainer: Luc Pionchon Architecture: arm Source: hildon-fm Version: 0.9.1-2 Depends: hildon-fm1 (= 0.9.1-2), libgtk2.0-dev (>= 1:2.4.0hildon1), hildon-lgpl-dev, osso-thumbnail-dev, osso-gwconnect-dev Recommends: hildon-libs-dev (>= 0.7.3) Filename: pool//maemo/ossw/h/hildon-fm/hildon-fm-dev_0.9.1-2_arm.deb Size: 9528 MD5sum: 44b016d8d86168ad78748f23da34eabb Description: LGPL-licensed File Management libraries development files Package: hildon-fm-test Priority: optional Section: libs Installed-Size: 8 Maintainer: Luc Pionchon Architecture: arm Source: hildon-fm Version: 0.9.1-2 Depends: hildon-fm1, outo Recommends: hildon-libs-dev (>= 0.7.3) Conflicts: hildon-fm1 (<< 0.8.10) Filename: pool//maemo/ossw/h/hildon-fm/hildon-fm-test_0.9.1-2_arm.deb Size: 3502 MD5sum: ae5e3d241ac54cafad4a6f35d50c5265 Description: LGPL-licensed File Management libraries unit tests Package: hildon-fm1-dbg Priority: optional Section: libs Installed-Size: 712 Maintainer: Luc Pionchon Architecture: arm Source: hildon-fm Version: 0.9.1-2 Depends: hildon-lgpl0-dbg (>= 0.8.6) | hildon-lgpl0 (>= 0.8.6) Recommends: hildon-libs0-dbg Filename: pool//maemo/ossw/h/hildon-fm/hildon-fm1-dbg_0.9.1-2_arm.deb Size: 352236 MD5sum: 1487db0de3053bc25f93726d1fa1874b Description: LGPL-licensed File Management libraries (with debug info) Package: hildon-fm1 Priority: optional Section: libs Installed-Size: 132 Maintainer: Luc Pionchon Architecture: arm Source: hildon-fm Version: 0.9.1-2 Replaces: hildon-libs0 (<< 0.7.3), hildon-lgpl0 (<< 0.8.6) Depends: hildon-lgpl0 (>= 0.8.6) Recommends: hildon-libs0 (>= 0.7.3) Conflicts: hildon-libs0 (<< 0.7.3), hildon-lgpl0 (<< 0.8.6) Filename: pool//maemo/ossw/h/hildon-fm/hildon-fm1_0.9.1-2_arm.deb Size: 52650 MD5sum: c1df79402a4f82d22bc028731a4d9a6d Description: LGPL-licensed File Management libraries Package: hildon-home Priority: optional Section: x11 Installed-Size: 72 Maintainer: Karoliina T Salminen Architecture: arm Version: 0.8.20-2 Replaces: hildon-base Depends: dbus-1 (>= 0.23.1), dbus-glib-1 (>= 0.23.1), hildon-fm1 (>= 0.9.1-1), hildon-lgpl0 (>= 0.9.14-1), hildon-libs0 (>= 0.9.6-2), libatk1.0-0 (>= 1.6.0), libc6 (>= 2.3.2.ds1-4), libexpat1 (>= 1.95.6), libfontconfig1 (>= 2.3.2-1osso3), libfreetype6 (>= 2.1.9-1osso10), libgconf2-6 (>= 2.6.4), libglib2.0-0 (>= 2.6.0), libgtk2.0-0 (>= 1:2.6.4-8), libmatchbox1 (>= 1.7-1), libosso-gnomevfs2-0 (>= 2.8.4.4), libosso1 (>= 0.8.9-1), libpango1.0-0 (>= 1.8.1), libpng12-0 (>= 1.2.5.0-4), libx11-6 | xlibs (>> 4.1.0), libxau0, libxext6 | xlibs (>> 4.1.0), libxft2 (>= 2.1.6-1osso8), libxml2 (>= 2.6.7), libxrender1, libxtst6, osso-thumbnail0 (>= 0.3.1-1), zlib1g (>= 1:1.2.1) Suggests: hildon-tests Conflicts: hildon-base Filename: pool//maemo/ossw/h/hildon-home/hildon-home_0.8.20-2_arm.deb Size: 25056 MD5sum: 2a06d9aaf12ec9a21c5480440de63c0e Description: Hildon Home Package: hildon-home-dev Priority: optional Section: devel Installed-Size: 16 Maintainer: Karoliina T Salminen Architecture: arm Source: hildon-home Version: 0.8.20-2 Conflicts: hildon-base Filename: pool//maemo/ossw/h/hildon-home/hildon-home-dev_0.8.20-2_arm.deb Size: 4288 MD5sum: 3a11777245c5c2f5029f9f3fb34ec613 Description: Hildon Home development files Package: hildon-lgpl-dev Priority: optional Section: devel Installed-Size: 168 Maintainer: Luc Pionchon Architecture: arm Source: hildon-lgpl Version: 0.9.14-2 Depends: hildon-lgpl0 (= 0.9.14-2), libgtk2.0-dev (>= 1:2.6.4-1osso2), libmatchbox-dev, libxtst-dev, libgconf2-dev Filename: pool//maemo/ossw/h/hildon-lgpl/hildon-lgpl-dev_0.9.14-2_arm.deb Size: 45854 MD5sum: 719db997b5a92546ea19fbb7c2797ce4 Description: LGPL-licensed Hildon libraries development files Package: hildon-lgpl-test Priority: optional Section: libs Installed-Size: 8 Maintainer: Luc Pionchon Architecture: arm Source: hildon-lgpl Version: 0.9.14-2 Depends: hildon-lgpl0 Conflicts: hildon-lgpl (<< 0.8.10) Filename: pool//maemo/ossw/h/hildon-lgpl/hildon-lgpl-test_0.9.14-2_arm.deb Size: 4022 MD5sum: 5ce65b38b96f309b2419662a8052a41e Description: LGPL-licensed Hildon libraries tests package Package: hildon-lgpl0-dbg Priority: optional Section: libs Installed-Size: 916 Maintainer: Luc Pionchon Architecture: arm Source: hildon-lgpl Version: 0.9.14-2 Filename: pool//maemo/ossw/h/hildon-lgpl/hildon-lgpl0-dbg_0.9.14-2_arm.deb Size: 473686 MD5sum: 1240c589db98aee79ddafeb358f5dec6 Description: LGPL-licensed Hildon libraries (with debug info) Package: hildon-lgpl0 Priority: optional Section: libs Installed-Size: 88 Maintainer: Luc Pionchon Architecture: arm Source: hildon-lgpl Version: 0.9.14-2 Replaces: hildon-libs0 (<< 0.7.3) Depends: dbus-1 (>= 0.23.1), dbus-glib-1 (>= 0.23.1), libatk1.0-0 (>= 1.6.0), libc6 (>= 2.3.2.ds1-4), libfontconfig1 (>= 2.3.2-1osso3), libfreetype6 (>= 2.1.9-1osso10), libgcc1 (>= 1:3.3.3-1), libgconf2-6 (>= 2.6.4), libglib2.0-0 (>= 2.6.0), libgtk2.0-0 (>= 1:2.6.4-8), libmatchbox1 (>= 1.7-1), libpango1.0-0 (>= 1.8.1), libpng12-0 (>= 1.2.5.0-4), libx11-6 | xlibs (>> 4.1.0), libxext6 | xlibs (>> 4.1.0), libxft2 (>= 2.1.6-1osso8), libxrender1, libxtst6, zlib1g (>= 1:1.2.1), libgconf2-6 Conflicts: hildon-libs0 (<< 0.7.3) Filename: pool//maemo/ossw/h/hildon-lgpl/hildon-lgpl0_0.9.14-2_arm.deb Size: 35108 MD5sum: 3b02376c80da8ad4d61533d136a6bf30 Description: LGPL-licensed Hildon libraries Package: hildon-libs-dev Priority: optional Section: devel Installed-Size: 164 Maintainer: Luc Piochon Architecture: arm Source: hildon-libs Version: 0.9.6-2 Depends: hildon-libs0 (= 0.9.6-2), libgtk2.0-dev (>= 2:2.6.4-1.osso6), hildon-lgpl-dev, hildon-fm-dev, libosso-gnomevfs2-dev Filename: pool//maemo/ossw/h/hildon-libs/hildon-libs-dev_0.9.6-2_arm.deb Size: 16724 MD5sum: 5c57ce18f32a12f07b0081f9b1fa2f61 Description: Hildon libraries development files Package: hildon-libs-test Priority: optional Section: libs Installed-Size: 8 Maintainer: Luc Piochon Architecture: arm Source: hildon-libs Version: 0.9.6-2 Depends: hildon-libs0, outo Conflicts: hildon-libs (<< 0.8.12) Filename: pool//maemo/ossw/h/hildon-libs/hildon-libs-test_0.9.6-2_arm.deb Size: 3396 MD5sum: 7de3bf0c37aa16da9735009a3cd57d3d Description: Hildon libraries unit tests. Package: hildon-libs0-dbg Priority: optional Section: libs Installed-Size: 3596 Maintainer: Luc Piochon Architecture: arm Source: hildon-libs Version: 0.9.6-2 Depends: dbus-1, hildon-lgpl0-dbg, hildon-fm1-dbg, osso-sounds-ui, libosso-gnomevfs2-0 Filename: pool//maemo/ossw/h/hildon-libs/hildon-libs0-dbg_0.9.6-2_arm.deb Size: 1938332 MD5sum: 7dbcebf16902c7996c5b610491bec4df Description: Hildon libraries (with debug info) Package: hildon-libs0 Priority: optional Section: libs Installed-Size: 240 Maintainer: Luc Piochon Architecture: arm Source: hildon-libs Version: 0.9.6-2 Depends: dbus-1 (>= 0.23.1), dbus-glib-1 (>= 0.23.1), hildon-fm1 (>= 0.9.1-1), hildon-lgpl0 (>= 0.9.14-1), libatk1.0-0 (>= 1.6.0), libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libgconf2-6 (>= 2.6.4), libglib2.0-0 (>= 2.6.0), libgtk2.0-0 (>= 1:2.6.4-8), libosso-gnomevfs2-0 (>= 2.8.4.4), libpango1.0-0 (>= 1.8.1), libxtst6, dbus-1, hildon-lgpl0, hildon-fm1, osso-sounds-ui, libosso-gnomevfs2-0 Filename: pool//maemo/ossw/h/hildon-libs/hildon-libs0_0.9.6-2_arm.deb Size: 99782 MD5sum: 8963767a0c3bf343e8e04c9e42596f4e Description: Hildon libraries Package: hildon-navigator Priority: optional Section: x11 Installed-Size: 76 Maintainer: Karoliina Salminen Architecture: arm Version: 0.9.6-2 Replaces: hildon-base Depends: dbus-1 (>= 0.23.1), dbus-glib-1 (>= 0.23.1), hildon-base-lib0 (>= 0.8.6-2), hildon-lgpl0 (>= 0.9.14-1), libatk1.0-0 (>= 1.6.0), libc6 (>= 2.3.2.ds1-4), libexpat1 (>= 1.95.6), libfontconfig1 (>= 2.3.2-1osso3), libfreetype6 (>= 2.1.9-1osso10), libgconf2-6 (>= 2.6.4), libglib2.0-0 (>= 2.6.0), libgtk2.0-0 (>= 1:2.6.4-8), libmatchbox1 (>= 1.7-1), libosso1 (>= 0.8.9-1), libpango1.0-0 (>= 1.8.1), libpng12-0 (>= 1.2.5.0-4), libx11-6 | xlibs (>> 4.1.0), libxau0, libxext6 | xlibs (>> 4.1.0), libxft2 (>= 2.1.6-1osso8), libxrender1, libxtst6, zlib1g (>= 1:1.2.1) Suggests: hildon-tests Conflicts: hildon-base Filename: pool//maemo/ossw/h/hildon-navigator/hildon-navigator_0.9.6-2_arm.deb Size: 29330 MD5sum: dcca63ededd65b1ab2452e1e870d07c9 Description: Hildon Navigator Package: hildon-status-bar-lib-dev Priority: optional Section: devel Installed-Size: 24 Maintainer: Karoliina Salminen Architecture: arm Source: hildon-status-bar Version: 0.8.11-1 Depends: hildon-status-bar-lib0 (= 0.8.11-1), hildon-libs-dev Filename: pool//maemo/ossw/h/hildon-status-bar/hildon-status-bar-lib-dev_0.8.11-1_arm.deb Size: 3720 MD5sum: 6fd78b1dfd325bbe9aca24926ba3e616 Description: Hildon Status Bar development files Package: hildon-status-bar-lib0 Priority: optional Section: libs Installed-Size: 32 Maintainer: Karoliina Salminen Architecture: arm Source: hildon-status-bar Version: 0.8.11-1 Replaces: hildon-base, hildon-status-bar-lib Depends: dbus-1 (>= 0.23.1), dbus-glib-1 (>= 0.23.1), hildon-fm1 (>= 0.9.1-1), hildon-lgpl0 (>= 0.9.14-1), hildon-libs0 (>= 0.9.6-2), libatk1.0-0 (>= 1.6.0), libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libglib2.0-0 (>= 2.6.0), libgtk2.0-0 (>= 1:2.6.4-8), libosso1 (>= 0.8.9-1), libpango1.0-0 (>= 1.8.1), libxtst6 Conflicts: hildon-base, hildon-status-bar-lib Filename: pool//maemo/ossw/h/hildon-status-bar/hildon-status-bar-lib0_0.8.11-1_arm.deb Size: 6436 MD5sum: b3e18465fb4cf7e637963d090441c493 Description: Hildon Status Bar library Package: hildon-status-bar Priority: optional Section: x11 Installed-Size: 32 Maintainer: Karoliina Salminen Architecture: arm Version: 0.8.11-1 Replaces: hildon-base Depends: dbus-1 (>= 0.23.1), dbus-glib-1 (>= 0.23.1), hildon-fm1 (>= 0.9.1-1), hildon-lgpl0 (>= 0.9.14-1), hildon-libs0 (>= 0.9.6-2), hildon-status-bar-lib0 (>= 0.8.11-1), libatk1.0-0 (>= 1.6.0), libc6 (>= 2.3.2.ds1-4), libexpat1 (>= 1.95.6), libfontconfig1 (>= 2.3.2-1osso3), libfreetype6 (>= 2.1.9-1osso10), libgconf2-6 (>= 2.6.4), libglib2.0-0 (>= 2.6.0), libgtk2.0-0 (>= 1:2.6.4-8), libmatchbox1 (>= 1.7-1), libosso-gnomevfs2-0 (>= 2.8.4.4), libosso1 (>= 0.8.9-1), libpango1.0-0 (>= 1.8.1), libpng12-0 (>= 1.2.5.0-4), libx11-6 | xlibs (>> 4.1.0), libxau0, libxext6 | xlibs (>> 4.1.0), libxft2 (>= 2.1.6-1osso8), libxml2 (>= 2.6.7), libxrender1, libxtst6, osso-thumbnail0 (>= 0.3.1-1), zlib1g (>= 1:1.2.1) Conflicts: hildon-base Filename: pool//maemo/ossw/h/hildon-status-bar/hildon-status-bar_0.8.11-1_arm.deb Size: 8200 MD5sum: 88ac5e0d185797fd1a769bf516889134 Description: Hildon Status Bar Package: hildon-input-method-framework Priority: optional Section: x11 Installed-Size: 52 Maintainer: Richard Sun Architecture: arm Source: hildon-input-method Version: 0.9.12-1sdk2 Depends: libgtk2.0-0, libatk1.0-0 (>= 1.6.0), libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libglib2.0-0 (>= 2.6.0), libgtk2.0-0 (>= 1:2.6.4-8), libpango1.0-0 (>= 1.8.1), libxtst6 Filename: pool//maemo/ossw/h/hildon-input-method/hildon-input-method-framework_0.9.12-1sdk2_arm.deb Size: 10588 MD5sum: b553f9188037049a602899b0ba47fbc5 Description: Framework for Hildon Input method Package: hildon-input-method-ui Priority: optional Section: x11 Installed-Size: 160 Maintainer: Richard Sun Architecture: arm Source: hildon-input-method Version: 0.9.12-1sdk2 Depends: hildon-input-method-framework, dbus-1 (>= 0.23.1), dbus-glib-1 (>= 0.23.1), hildon-fm1 (>= 0.9.1-1), hildon-input-method-widgets0 (>= 0.9.10-1sdk2), hildon-lgpl0 (>= 0.9.14-1), hildon-libs0 (>= 0.9.6-2), libatk1.0-0 (>= 1.6.0), libaudiofile0 (>= 0.2.3-4), libc6 (>= 2.3.2.ds1-4), libexpat1 (>= 1.95.6), libfontconfig1 (>= 2.3.2-1osso3), libfreetype6 (>= 2.1.9-1osso10), libgconf2-6 (>= 2.6.4), libglib2.0-0 (>= 2.6.0), libgtk2.0-0 (>= 1:2.6.4-8), libimengines0, libimlayouts0, libmatchbox1 (>= 1.7-1), libosso-gnomevfs2-0 (>= 2.8.4.4), libosso-help0 (>= 1.0.01), libosso1 (>= 0.8.9-1), libpango1.0-0 (>= 1.8.1), libpng12-0 (>= 1.2.5.0-4), libx11-6 | xlibs (>> 4.1.0), libxau0, libxext6 | xlibs (>> 4.1.0), libxft2 (>= 2.1.6-1osso8), libxml2 (>= 2.6.7), libxrender1, libxtst6, osso-thumbnail0 (>= 0.3.1-1), zlib1g (>= 1:1.2.1), hildon-lgpl0 (>= 0.9.9-1) Filename: pool//maemo/ossw/h/hildon-input-method/hildon-input-method-ui_0.9.12-1sdk2_arm.deb Size: 35270 MD5sum: 0543d150273e72b3a5b7c516fbd6fadd Description: IM Methods for Hildon Input method Western input method for Hildon Input method Package: hildon-input-method Priority: optional Section: x11 Installed-Size: 8 Maintainer: Richard Sun Architecture: arm Version: 0.9.12-1sdk2 Replaces: hildon-keyboard Depends: hildon-input-method-framework, hildon-input-method-ui, libimlayouts0 Conflicts: hildon-keyboard Filename: pool//maemo/ossw/h/hildon-input-method/hildon-input-method_0.9.12-1sdk2_arm.deb Size: 1722 MD5sum: b2362588f0f1acbba05527eee5efabc4 Description: Hildon Input method Package: hildon-input-method-widgets0 Priority: optional Section: x11 Installed-Size: 32 Maintainer: Jakub Pavelek Architecture: arm Source: hildon-input-method-widgets Version: 0.9.10-1sdk3 Depends: libatk1.0-0 (>= 1.6.0), libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libglib2.0-0 (>= 2.6.0), libgtk2.0-0 (>= 1:2.6.4-8), libimengines0, libpango1.0-0 (>= 1.8.1) Recommends: hildon-keyboard Filename: pool//maemo/ossw/h/hildon-input-method-widgets/hildon-input-method-widgets0_0.9.10-1sdk3_arm.deb Size: 10530 MD5sum: 133c575aad35f9bf4be8bb93406cd5f8 Description: Widgets for hildon-keyboard Package: hildon-input-method-widgets-dev Priority: optional Section: x11 Installed-Size: 16 Maintainer: Jakub Pavelek Architecture: arm Source: hildon-input-method-widgets Version: 0.9.10-1sdk3 Depends: hildon-input-method-widgets0 (= 0.9.10-1sdk3), libimengines-dev Recommends: hildon-keyboard Filename: pool//maemo/ossw/h/hildon-input-method-widgets/hildon-input-method-widgets-dev_0.9.10-1sdk3_arm.deb Size: 2910 MD5sum: 3548477fa57ec5c6366016d90f7faf1d Description: Developmental files for hildon-input-method-widgets0 Package: hildon-input-method-widgets0-dbg Priority: optional Section: x11 Installed-Size: 180 Maintainer: Jakub Pavelek Architecture: arm Source: hildon-input-method-widgets Version: 0.9.10-1sdk3 Recommends: hildon-keyboard Filename: pool//maemo/ossw/h/hildon-input-method-widgets/hildon-input-method-widgets0-dbg_0.9.10-1sdk3_arm.deb Size: 84476 MD5sum: a08fc073648fd551883bf10bd3194790 Description: Debug versions of the hildon-input-method-widgets0 library Package: hildon-initscripts Priority: optional Section: base Installed-Size: 24 Maintainer: Kimmo Hamalainen Architecture: arm Version: 0.8.14-1 Replaces: hildon-base Depends: matchbox-window-manager, gtk2-engines-sapwood, dbus-1 (>= 0.22-1), osso-af-startup Recommends: gdb, valgrind Conflicts: hildon-base Filename: pool//maemo/ossw/h/hildon-initscripts/hildon-initscripts_0.8.14-1_arm.deb Size: 3404 MD5sum: a46ce7e2140c3f70f661c5a2b7265a30 Description: Initscripts for launching Home, StatusBar etc. Package: osso-af-sb-startup Priority: optional Section: base Installed-Size: 24 Maintainer: Kimmo Hamalainen Architecture: arm Source: hildon-initscripts Version: 0.8.14-1 Depends: hildon-initscripts, gtk2-engines-sapwood Recommends: gdb, valgrind Filename: pool//maemo/ossw/h/hildon-initscripts/osso-af-sb-startup_0.8.14-1_arm.deb Size: 4958 MD5sum: 6f248b88d0c2450a677bb37850bf071a Description: Initscripts for launching Home, StatusBar etc in Scratchbox. Package: libice-dev Priority: optional Section: libdevel Installed-Size: 252 Maintainer: Riku Voipio Architecture: arm Source: ice Version: 6.3.4-1 Replaces: xlibs-dev (<< 4.3.0) Depends: libice6 (= 6.3.4-1), x-dev, libc6-dev | libc-dev Conflicts: xlibs-dev (<< 4.3.0) Filename: pool//maemo/ossw/i/ice/libice-dev_6.3.4-1_arm.deb Size: 57908 MD5sum: 49e3a7bdc095d1f7050b1882830ed255 Description: Inter-Client Exchange library development files Header files and a static version of the ICE library are provided by this package. . See the libice6 package for further information. Package: libice6 Priority: optional Section: libs Installed-Size: 140 Maintainer: Riku Voipio Architecture: arm Source: ice Version: 6.3.4-1 Replaces: xlibs (<< 4.3.0) Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1) Conflicts: xlibs (<< 4.3.0) Filename: pool//maemo/ossw/i/ice/libice6_6.3.4-1_arm.deb Size: 41518 MD5sum: 7a91ddbb67fbbe695d329c3e3ce0611d Description: Inter-Client Exchange library libICE provides an interface to ICE, the Inter-Client Exchange protocol. Motivated by issues arising from the need for X Window System clients to share data with each other, the ICE protocol provides a generic framework for building protocols on top of reliable, byte-stream transport connections. It provides basic mechanisms for setting up and shutting down connections, for performing authentication, for negotiating versions, and for reporting errors. Package: ifupdown Priority: important Section: net Installed-Size: 216 Maintainer: Anthony Towns Architecture: arm Version: 0.6.4-4.8osso1.1 Replaces: netbase (<< 4.00) Depends: net-tools, libc6 (>= 2.3.2.ds1-4), debconf (>= 0.5) | debconf-2.0 Suggests: iproute, dhcp-client | dhcp3-client, ppp Filename: pool//maemo/ossw/i/ifupdown/ifupdown_0.6.4-4.8osso1.1_arm.deb Size: 40074 MD5sum: 1d70b8c4141f503c751c61102c8486f7 Description: High level tools to configure network interfaces This package provides the tools ifup and ifdown which may be used to configure (or, respectively, deconfigure) network interfaces based on interface definitions in the file /etc/network/interfaces. Package: iptables Priority: important Section: net Installed-Size: 1280 Maintainer: Laurence J. Lane Architecture: arm Version: 1.2.11-8 Depends: libc6 (>= 2.3.2.ds1-4) Suggests: ipmasq, iproute Filename: pool//maemo/ossw/i/iptables/iptables_1.2.11-8_arm.deb Size: 385156 MD5sum: bd9d3d2dac5f8ad6c389e9ab788545bd Description: Linux kernel 2.4+ iptables administration tools netfilter and iptables provide a Linux kernel framework for stateful and stateless packet filtering, network and port addresss translation, and other IP packet manipulation. The framework is the successor to ipchains. . netfilter and iptables are used in applications such as Internet connection sharing, firewalls, IP accounting, transparent proxying, advanced routing and traffic control. . iptables web site: http://www.iptables.org/ Package: jade Priority: optional Section: text Installed-Size: 992 Maintainer: Neil Roeth Architecture: arm Version: 1.2.1-38 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.2-1), libsp1 (>= 1.3.4-1.2.1-30), libstdc++5 (>= 1:3.3.2-1), sgml-base (>= 1.17) Suggests: doc-base, sgml-data, sp Filename: pool//maemo/ossw/j/jade/jade_1.2.1-38_arm.deb Size: 332420 MD5sum: 808a16d96b5ca2c0e360a68b0d8ee973 Description: James Clark's DSSSL Engine Jade is an implementation of the DSSSL style language. . The jade engine is a useful tool (in conjunction with a DSSSL style sheet) for translating SGML documents into other formats. Jade can currently generate SGML, RTF, and TeX. In conjunction with the "jadetex" TeX style, it can generate quite nice output. . Author: James Clark Homepage: http://www.jclark.com/jade/ Package: libsp1 Priority: optional Section: libs Installed-Size: 4336 Maintainer: Neil Roeth Architecture: arm Source: jade (1.2.1-38) Version: 1.3.4-1.2.1-38 Replaces: sp (<= 1.3-1.1-6) Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.2-1), libstdc++5 (>= 1:3.3.2-1) Conflicts: sp (<= 1.3-1.1-6) Filename: pool//maemo/ossw/j/jade/libsp1_1.3.4-1.2.1-38_arm.deb Size: 1452394 MD5sum: eec18e2184c9cbbfc484105d0dd17aef Description: Runtime library for James Clark's SP suite This is the SP suite's shared library runtime support. This C++ library contains entity management functions, parsing functions, and other functions useful for SGML/XML/DSSSL development. . This shared library is used by the sp and jade packages, among others. . Author: James Clark Homepage: http://www.jclark.com/sp/ Package: sp Priority: optional Section: text Installed-Size: 628 Maintainer: Neil Roeth Architecture: arm Source: jade (1.2.1-38) Version: 1.3.4-1.2.1-38 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.2-1), libsp1 (>= 1.3.4-1.2.1-30), libstdc++5 (>= 1:3.3.2-1) Suggests: doc-base, sgml-data Filename: pool//maemo/ossw/j/jade/sp_1.3.4-1.2.1-38_arm.deb Size: 177656 MD5sum: 88ca21ebb6395095abf134d235a13117 Description: James Clark's SGML parsing tools This package is a collection of SGML/XML tools called SP. . These tools are used to parse, validate, and normalize SGML and XML files. The central programs included in this package are 'nsgmls', which replaces sgmls, 'spam', 'spent', 'sgmlnorm', and 'sgml2xml'. . Author: James Clark Homepage: http://www.jclark.com/sp/ Package: kdbusd Priority: optional Section: net Installed-Size: 84 Maintainer: Timo Teräs Architecture: arm Version: 0.3 Depends: dbus-1 (>= 0.22), libc6 (>= 2.3.2.ds1-4) Filename: pool//maemo/ossw/k/kdbusd/kdbusd_0.3_arm.deb Size: 5826 MD5sum: 8df613cd7d73faffd168f4078385597c Description: Kernel UEvent to D-BUS proxy This package contains a proxy daemon which forwards Kernel UEvents to D-BUS system daemon. Package: lessertunjo-dev Priority: optional Section: devel Installed-Size: 20 Maintainer: Kuisma Salonen Architecture: arm Source: lessertunjo Version: 0.0.10-3 Provides: libshadowapp-dev, libshadowappd-dev Depends: lessertunjo0 (= 0.0.10-3), hildon-libs-dev, libosso-dev, dbus-1-dev (>= 0.22), libgconf2-dev Conflicts: libshadowapp-dev, libshadowappd-dev, archtunjo (<< 0.0.5) Filename: pool//maemo/ossw/l/lessertunjo/lessertunjo-dev_0.0.10-3_arm.deb Size: 5492 MD5sum: 61f5fea2dbb2aa0ca9a229b9a70d17ca Description: development libraries for lessertunjo The development headers for libshadowapp and for the libshadowappd. Package: lessertunjo0 Priority: optional Section: libs Installed-Size: 60 Maintainer: Kuisma Salonen Architecture: arm Source: lessertunjo Version: 0.0.10-3 Provides: libshadowapp0, libshadowappd0 Depends: dbus-1 (>= 0.23.1), dbus-glib-1 (>= 0.23.1), libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libgconf2-6 (>= 2.6.4), libglib2.0-0 (>= 2.6.0), libosso1 (>= 0.8.9-1) Conflicts: libshadowapp0, libshadowappd0, archtunjo (<< 0.0.5) Filename: pool//maemo/ossw/l/lessertunjo/lessertunjo0_0.0.10-3_arm.deb Size: 11914 MD5sum: e69128b7a1c0f26abbe7fc54cb1856a2 Description: D-BUS wrapping library Libraries to wrap D-BUS traffic into traffic readable by non-glib application. Package includes former libshadowapp and libshadowappd packages. Package: linux-kernel-headers Priority: standard Section: devel Installed-Size: 8324 Maintainer: GNU Libc Maintainers Architecture: arm Version: 2.5.999-test7-bk-15 Replaces: libc6-dev (<< 2.3.2.ds1-6), libc6.1-dev (<< 2.3.2.ds1-6), dvb-dev (<< 1.0.1-6) Conflicts: libc6-dev (<< 2.3.2.ds1-6), libc6.1-dev (<< 2.3.2.ds1-6), dvb-dev (<< 1.0.1-6) Filename: pool//maemo/ossw/l/linux-kernel-headers/linux-kernel-headers_2.5.999-test7-bk-15_arm.deb Size: 1472794 MD5sum: 2b425c66ac6644e57bd40fd65de21ba7 Description: Linux Kernel Headers for development This package provides headers from the Linux kernel. These headers are used by the installed headers for GNU glibc and other system libraries. Package: ltrace Priority: optional Section: utils Installed-Size: 188 Maintainer: Juan Cespedes Architecture: arm Version: 0.3.31 Depends: libc6 (>= 2.3.1-1) Filename: pool//maemo/ossw/l/ltrace/ltrace_0.3.31_arm.deb Size: 57604 MD5sum: 7eac9d8d5961fa0aefa0099a33cd398e Description: Tracks runtime library calls in dynamically linked programs ltrace is a debugging program which runs a specified command until it exits. While the command is executing, ltrace intercepts and records the dynamic library calls which are called by the executed process and the signals received by that process. It can also intercept and print the system calls executed by the program. . The program to be traced need not be recompiled for this, so you can use it on binaries for which you don't have the source handy. . You should install ltrace if you need a sysadmin tool for tracking the execution of processes. Package: libelfg0 Priority: optional Section: libs Installed-Size: 176 Maintainer: Alex Pennace Architecture: arm Source: libelf Version: 0.8.5-1 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1) Conflicts: libelf, libelf0 (<= 0.6.4-5) Filename: pool//maemo/ossw/libe/libelf/libelfg0_0.8.5-1_arm.deb Size: 47772 MD5sum: a1e1679ee45e43798e596e4f2c5122a7 Description: an ELF object file access library The elf library provides routines to access, and manipulate, Elf object files. It is still not complete, but is required for a number of programs, such as Eli (a state of the art compiler generation system), and Elk (the Extension Language Kit - an implementation of the Scheme programming language.) . This shared library may be needed by pre-packaged programs. To compile programs with this library, you will need to install the libelfg0-dev package as well. Package: libglade2-0 Priority: optional Section: libs Installed-Size: 196 Maintainer: Andreas Rottmann Architecture: arm Source: libglade2 Version: 1:2.4.0-1osso Depends: libatk1.0-0 (>= 1.6.0), libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libglib2.0-0 (>= 2.4.1), libgtk2.0-0 (>= 1:2.4.4), libpango1.0-0 (>= 1.4.1), libxml2 (>= 2.6.7), zlib1g (>= 1:1.2.1) Recommends: python2.3 Filename: pool//maemo/ossw/libg/libglade2/libglade2-0_2.4.0-1osso_arm.deb Size: 78010 MD5sum: dcef286d92b691182053e22d91d7449e Description: Library to load .glade files at runtime This library allows you to load user interfaces in your program, which are stored externally. This allows alteration of the interface without recompilation of the program. . The interfaces can also be edited with GLADE. Package: libglade2-dev Priority: optional Section: libdevel Installed-Size: 476 Maintainer: Andreas Rottmann Architecture: arm Source: libglade2 Version: 1:2.4.0-1osso Replaces: libglade2-0 (<< 2.0.1-10) Depends: libglade2-0 (= 1:2.4.0-1osso), libgtk2.0-dev (>= 2.0.6), libxml2-dev Suggests: glade-2 | glade-gnome-2 Filename: pool//maemo/ossw/libg/libglade2/libglade2-dev_2.4.0-1osso_arm.deb Size: 113724 MD5sum: c477b3bbad71cc2b94110a14cde32d39 Description: Development files for libglade This library allows you to load user interfaces in your program, which are stored externally. This allows alteration of the interface without recompilation of the program. . The interfaces can also be edited with GLADE. Package: libhtml-parser-perl Priority: optional Section: perl Installed-Size: 288 Maintainer: Kenneth J. Pronovici Architecture: arm Version: 3.35-1 Replaces: libwww-perl (<< 5.36-0) Depends: perlapi-5.8.2, perl (>= 5.8.2-2), libhtml-tagset-perl, libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.2-1) Conflicts: libwww-perl (<< 5.36-0), libhtml-tree-perl (<< 0.61-0) Filename: pool//maemo/ossw/libh/libhtml-parser-perl/libhtml-parser-perl_3.35-1_arm.deb Size: 95474 MD5sum: b69e33c1692c1c1973b5cf1de591642e Description: A collection of modules that parse HTML text documents This is a collection of modules that parse HTML text documents. These modules used to be part of the libwww-perl distribution, but are now unbundled in order to facilitate a separate development track. Package: libimengines-dev Priority: standard Section: base Installed-Size: 32 Maintainer: Jakub Pavelek Architecture: arm Source: libimengines Version: 1.1-1sdk1 Depends: libimengines0, libglib2.0-dev Filename: pool//maemo/ossw/libi/libimengines/libimengines-dev_1.1-1sdk1_arm.deb Size: 5084 MD5sum: 7ab3307e3282aac2ca7b1a176278e28a Description: IM Engines Library development files. Development files for IM Engines library. Package: libimengines0 Priority: standard Section: libs Installed-Size: 24 Maintainer: Jakub Pavelek Architecture: arm Source: libimengines Version: 1.1-1sdk1 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libglib2.0-0 (>= 2.6.0) Filename: pool//maemo/ossw/libi/libimengines/libimengines0_1.1-1sdk1_arm.deb Size: 5604 MD5sum: c2d0e865fac0503b65f7772a0cdd5615 Description: IM Engines Library Library for IM engines. Provides standard interface between engines and the Input Method. Any engine can be added here and used by IM knowing any engine specific details. Package: libimlayouts-dev Priority: standard Section: base Installed-Size: 16 Maintainer: Mohammad Anwari Architecture: arm Source: libimlayouts Version: 0.1-1osso6 Depends: libimlayouts0, libexpat1-dev Filename: pool//maemo/ossw/libi/libimlayouts/libimlayouts-dev_0.1-1osso6_arm.deb Size: 2864 MD5sum: faa8bff88ab24ba2e0ea48493ba0fd55 Description: IM LAyout Library Header for IM Layouts. Package: libimlayouts0 Priority: standard Section: libs Installed-Size: 36 Maintainer: Mohammad Anwari Architecture: arm Source: libimlayouts Version: 0.1-1osso6 Depends: libatk1.0-0 (>= 1.6.0), libc6 (>= 2.3.2.ds1-4), libexpat1 (>= 1.95.6), libgcc1 (>= 1:3.3.3-1), libglib2.0-0 (>= 2.6.0), libgtk2.0-0 (>= 1:2.6.4-8), libpango1.0-0 (>= 1.8.1), libexpat1 Filename: pool//maemo/ossw/libi/libimlayouts/libimlayouts0_0.1-1osso6_arm.deb Size: 7598 MD5sum: 078a827f1737ff606e29176d6e062a63 Description: IM Layouts Library Library for IM Layouts. Package: libjpeg-progs Priority: optional Section: graphics Installed-Size: 304 Maintainer: Tommi Komulainen Architecture: arm Source: libjpeg6b Version: 6b-9osso1 Depends: libc6 (>= 2.3.2.ds1-4), libjpeg62 Filename: pool//maemo/ossw/libj/libjpeg6b/libjpeg-progs_6b-9osso1_arm.deb Size: 207886 MD5sum: c8be4e587f9d0f44ebd9ed0b71016ac1 Description: Programs for manipulating JPEG files This package contains programs for manipulating JPEG files: cjpeg/djpeg: convert to/from the JPEG file format rdjpgcom/wrjpgcom: read/write comments in JPEG files jpegtran: lossless transformations of JPEG files Package: libjpeg62-dev Priority: optional Section: libdevel Installed-Size: 392 Maintainer: Tommi Komulainen Architecture: arm Source: libjpeg6b Version: 6b-9osso1 Replaces: libjpeg-dev, libjpegg-dev Provides: libjpeg-dev, libjpegg-dev Depends: libjpeg62 (= 6b-9osso1), libc6-dev Conflicts: libjpeg-dev, libjpegg-dev Filename: pool//maemo/ossw/libj/libjpeg6b/libjpeg62-dev_6b-9osso1_arm.deb Size: 191716 MD5sum: 5ee6edb9dc2abcfd05607d0950462c2d Description: Development files for the IJG JPEG library The Independent JPEG Group's JPEG library is a library for handling JPEG files. . This package contains the static library, headers and documentation. Package: libjpeg62 Priority: optional Section: libs Installed-Size: 152 Maintainer: Tommi Komulainen Architecture: arm Source: libjpeg6b Version: 6b-9osso1 Replaces: libjpeg6b Provides: libjpeg6b Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1) Conflicts: libjpeg6b Filename: pool//maemo/ossw/libj/libjpeg6b/libjpeg62_6b-9osso1_arm.deb Size: 81630 MD5sum: 568dd727ac5c955ce17d5aac78408fe5 Description: The Independent JPEG Group's JPEG runtime library The Independent JPEG Group's JPEG library is a library for handling JPEG files. . This package contains the shared library. Package: libmatchbox-dev Priority: optional Section: devel Installed-Size: 280 Maintainer: Tommi Leino Architecture: arm Source: libmatchbox1 Version: 1:1.7-2 Replaces: matchbox (<< 1:0.8.2) Depends: libmatchbox1 (= 1:1.7-2), pkg-config, libglib2.0-dev, libpng12-dev, libjpeg62-dev, libxft-dev (>= 2.1.0), libxext-dev, libx11-dev, libxau-dev Filename: pool//maemo/ossw/libm/libmatchbox1/libmatchbox-dev_1.7-2_arm.deb Size: 74296 MD5sum: 6b7e2fb0812f05c21ed8d8f69b378f8c Description: shared library for Matchbox Project applications [development] Matchbox is a base environment for the X Window System running on non-desktop embedded platforms such as handhelds, set-top boxes, kiosks and anything else for which screen space, input mechanisms or system resources are limited. . libmatchbox provides core functionality used by several Matchbox project applications. . This package contains libmatchbox development files. Package: libmatchbox1 Priority: optional Section: libs Installed-Size: 136 Maintainer: Tommi Leino Architecture: arm Version: 1:1.7-2 Replaces: matchbox (<< 1:0.8.2) Depends: libc6 (>= 2.3.2.ds1-4), libfontconfig1 (>= 2.3.1-1osso2), libfreetype6 (>= 2.1.9-1osso8), libgcc1 (>= 1:3.3.3-1), libpng12-0 (>= 1.2.5.0-4), libx11-6 | xlibs (>> 4.1.0), libxext6 | xlibs (>> 4.1.0), libxft2 (>= 2.1.6-1osso8), libxrender1, zlib1g (>= 1:1.2.1) Filename: pool//maemo/ossw/libm/libmatchbox1/libmatchbox1_1.7-2_arm.deb Size: 42766 MD5sum: 7b4b5b55dfd7ad35324b4c15ce3bfcfd Description: shared library for Matchbox Project applications [runtime] Matchbox is a base environment for the X Window System running on non-desktop embedded platforms such as handhelds, set-top boxes, kiosks and anything else for which screen space, input mechanisms or system resources are limited. . libmatchbox provides core functionality used by several Matchbox project applications. . This package contains the libmatchbox runtime library. Package: libopenobex-1.0-0-dev Priority: optional Section: libdevel Installed-Size: 96 Maintainer: Edd Dumbill Architecture: arm Source: libopenobex1.0 Version: 1:1.0.0-rel-3osso1 Provides: libopenobex-dev Depends: libopenobex-1.0-0 (= 1:1.0.0-rel-3osso1), libc6-dev | libc-dev Conflicts: libopenobex-dev Filename: pool//maemo/ossw/libo/libopenobex1.0/libopenobex-1.0-0-dev_1.0.0-rel-3osso1_arm.deb Size: 28270 MD5sum: 2c782e4d941c403a6840fcb680166d72 Description: OBEX protocol library - development files The Object Exchange protocol can best be described as binary HTTP. OBEX is optimised for ad-hoc wireless links and can be used to exchange all kind of objects like files, pictures, calendar entries (vCal) and business cards (vCard). . OBEX is builtin in devices like PDA's like the Palm Pilot, and mobile phones like the Ericsson R320, Siemens S25, Siemens S45, Siemens ME45, Nokia NM207 and Nokia 9110 Communicator. . This package contains the development files. Package: libopenobex-1.0-0 Priority: optional Section: libs Installed-Size: 52 Maintainer: Edd Dumbill Architecture: arm Source: libopenobex1.0 Version: 1:1.0.0-rel-3osso1 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1) Conflicts: libopenobex1 (<= 0.9.8-5) Filename: pool//maemo/ossw/libo/libopenobex1.0/libopenobex-1.0-0_1.0.0-rel-3osso1_arm.deb Size: 20490 MD5sum: c87d60a174e2fcd208dc53c0a6905362 Description: OBEX protocol library The Object Exchange protocol can best be described as binary HTTP. OBEX is optimised for ad-hoc wireless links and can be used to exchange all kind of objects like files, pictures, calendar entries (vCal) and business cards (vCard). . OBEX is builtin in devices like PDA's like the Palm Pilot, and mobile phones like the Ericsson R320, Siemens S25, Siemens S45, Siemens ME45, Nokia NM207 and Nokia 9110 Communicator. Package: libosso-dbus-conf Priority: optional Section: base Installed-Size: 16 Maintainer: Kimmo Hamalainen Architecture: arm Source: libosso Version: 0.8.9-1 Replaces: libosso0 (<< 0.8.6-1) Conflicts: libosso0 (<< 0.8.6-1) Filename: pool//maemo/ossw/libo/libosso/libosso-dbus-conf_0.8.9-1_arm.deb Size: 2874 MD5sum: c58478da6d348d3e197e8ef4bb47a0dc Description: LibOSSO D-BUS configuration settings Package: libosso-dev Priority: optional Section: devel Installed-Size: 568 Maintainer: Kimmo Hamalainen Architecture: arm Source: libosso Version: 0.8.9-1 Depends: libosso1 (= 0.8.9-1), dbus-glib-1-dev Filename: pool//maemo/ossw/libo/libosso/libosso-dev_0.8.9-1_arm.deb Size: 63816 MD5sum: 9b2d216419598a8fdd349aa8b3f195c1 Description: LibOSSO development files Package: libosso-test Priority: optional Section: libs Installed-Size: 8 Maintainer: Kimmo Hamalainen Architecture: arm Source: libosso Version: 0.8.9-1 Replaces: libosso0 (<< 0.8.6-1) Depends: libosso1 (= 0.8.9-1), dbus-glib-1-dev, outo Conflicts: libosso0 (<< 0.8.6-1) Filename: pool//maemo/ossw/libo/libosso/libosso-test_0.8.9-1_arm.deb Size: 2198 MD5sum: dd2d1a5f37e8352cf0ae7b291ba3a03f Description: LibOSSO libraries unit tests Package: libosso1-dbg Priority: optional Section: libs Installed-Size: 56 Maintainer: Kimmo Hamalainen Architecture: arm Source: libosso Version: 0.8.9-1 Depends: libosso-dbus-conf Filename: pool//maemo/ossw/libo/libosso/libosso1-dbg_0.8.9-1_arm.deb Size: 19770 MD5sum: b3504c55c69509e2a0b1117c007791a2 Description: LibOSSO libraries (with debug info) Package: libosso1 Priority: optional Section: libs Installed-Size: 44 Maintainer: Kimmo Hamalainen Architecture: arm Source: libosso Version: 0.8.9-1 Depends: dbus-1 (>= 0.23.1), dbus-glib-1 (>= 0.23.1), libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libglib2.0-0 (>= 2.6.0), libosso-dbus-conf Filename: pool//maemo/ossw/libo/libosso/libosso1_0.8.9-1_arm.deb Size: 16340 MD5sum: 7acadb07a46e9bacd3c322fbb7606c39 Description: LibOSSO libraries Package: libosso-gsf-1-dev Priority: optional Section: libdevel Installed-Size: 176 Maintainer: Andrey Kochanov Architecture: arm Source: libosso-gsf Version: 1.11.10.1-1 Depends: libosso-gsf-1 (= 1.11.10.1-1), libglib2.0-dev (>= 2.4.1-2), zlib1g-dev Recommends: pkg-config Filename: pool//maemo/ossw/libo/libosso-gsf/libosso-gsf-1-dev_1.11.10.1-1_arm.deb Size: 39264 MD5sum: 354bebbded3ab0646a5ed7a5ab129f5d Description: Dev package for Osso version of libgsf Patched version of libgsf used in osso-backup. Package: libosso-gsf-1 Priority: optional Section: libs Installed-Size: 72 Maintainer: Andrey Kochanov Architecture: arm Source: libosso-gsf Version: 1.11.10.1-1 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libglib2.0-0 (>= 2.6.0), zlib1g (>= 1:1.2.1) Filename: pool//maemo/ossw/libo/libosso-gsf/libosso-gsf-1_1.11.10.1-1_arm.deb Size: 25900 MD5sum: 8f116f4c58e3762ec9f86a4582c3fc02 Description: Osso version of libgsf Patched version of libgsf used in osso-backup. Package: libosso-help0 Priority: optional Section: misc Installed-Size: 24 Maintainer: Karoliina T. Salminen Architecture: arm Source: libosso-help Version: 1.0.01 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1) Filename: pool//maemo/ossw/libo/libosso-help/libosso-help0_1.0.01_arm.deb Size: 2804 MD5sum: 9bde575eb71bf75e7e957a333e08b86f Description: OSSO Help Runtime library Shared library required for running Help UI and integrating with other applications. Package: libpng12-0 Priority: optional Section: libs Installed-Size: 236 Maintainer: Josselin Mouette Architecture: arm Source: libpng3 Version: 1.2.5.0-5 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.2-1), zlib1g (>= 1:1.2.1) Filename: pool//maemo/ossw/libp/libpng3/libpng12-0_1.2.5.0-5_arm.deb Size: 103820 MD5sum: 4b180ded2cc80920305ec4818271a5dc Description: PNG library - runtime libpng is a library implementing an interface for reading and writing PNG (Portable Network Graphics) format files. . This package contains the runtime library files needed to run software using libpng. . URL: http://www.libpng.org/pub/png/libpng.html Package: libpng12-dev Priority: optional Section: libdevel Installed-Size: 588 Maintainer: Josselin Mouette Architecture: arm Source: libpng3 Version: 1.2.5.0-5 Replaces: libpng3-dev (<= 1.2.5), libpng12-0-dev Provides: libpng-dev, libpng12-0-dev Depends: libpng12-0 (= 1.2.5.0-5), zlib1g-dev Conflicts: libpng2-dev, libpng-dev, libpng12-0-dev, libpng2 (<< 1.0.12-3) Filename: pool//maemo/ossw/libp/libpng3/libpng12-dev_1.2.5.0-5_arm.deb Size: 241512 MD5sum: 95e670f77173695f69a39957fb58e310 Description: PNG library - development libpng is a library implementing an interface for reading and writing PNG (Portable Network Graphics) format files. . This package contains the header and development files needed to build programs and packages using libpng. . URL: http://www.libpng.org/pub/png/libpng.html Package: libsdl1.2-dev Priority: optional Section: devel Installed-Size: 1168 Maintainer: Kuisma Salonen Architecture: arm Source: libsdl1.2 Version: 1.2.8-3 Depends: libsdl1.2 (= 1.2.8-3), xlibs-dev, osso-esd-dev Filename: pool//maemo/ossw/libs/libsdl1.2/libsdl1.2-dev_1.2.8-3_arm.deb Size: 306724 MD5sum: 799a0af2046cddbb0fa148def2b2282e Description: Development files for libsdl Development headers and static libraries for libsdl. Package: libsdl1.2 Priority: optional Section: libs Installed-Size: 384 Maintainer: Kuisma Salonen Architecture: arm Version: 1.2.8-3 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libstdc++5 (>= 1:3.3.3-1), libx11-6 | xlibs (>> 4.1.0), libxext6 | xlibs (>> 4.1.0) Filename: pool//maemo/ossw/libs/libsdl1.2/libsdl1.2_1.2.8-3_arm.deb Size: 150318 MD5sum: a45588adaa1e81b34272ad25566b8838 Description: Simple "Direct"Media Layer Altrough it claims to be "direct", it is not that direct as you can see after using it for a while... Package: libsdl-mixer1.2-dev Priority: optional Section: devel Installed-Size: 296 Maintainer: Kuisma Salonen Architecture: arm Source: libsdl-mixer1.2 Version: 1.2.6 Depends: libsdl-mixer1.2 (= 1.2.6) Filename: pool//maemo/ossw/libs/libsdl-mixer1.2/libsdl-mixer1.2-dev_1.2.6_arm.deb Size: 94384 MD5sum: 7a633d6c6c39b00d58c5754f43c19edd Description: Development files for libSDL_Mixer f00b34r Package: libsdl-mixer1.2 Priority: optional Section: libs Installed-Size: 196 Maintainer: Kuisma Salonen Architecture: arm Version: 1.2.6 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libsdl1.2 Filename: pool//maemo/ossw/libs/libsdl-mixer1.2/libsdl-mixer1.2_1.2.6_arm.deb Size: 65806 MD5sum: 0a8da161aff924770a7d8515e472284b Description: Mixer library for libSDL f00b34r Package: libtool Priority: optional Section: devel Installed-Size: 2392 Maintainer: Scott James Remnant Architecture: arm Version: 1.5.6-1 Depends: gcc | c-compiler, cpp, libc6-dev | libc-dev, file, autotools-dev Recommends: libltdl3-dev Suggests: libtool-doc, autoconf (>> 2.50), automaken, g77 | fortran77-compiler, gcj Conflicts: autoconf (<= 2.12), automake (<= 1.3), libtool1.4 Filename: pool//maemo/ossw/libt/libtool/libtool_1.5.6-1_arm.deb Size: 626524 MD5sum: 6800cd4adf2bb742531336dcd5c523a4 Description: Generic library support script This is GNU libtool, a generic library support script. Libtool hides the complexity of generating special library types (such as shared libraries) behind a consistent interface. To use libtool, add the new generic library building commands to your Makefile, Makefile.in, or Makefile.am. See the documentation for details. Libtool supports building static libraries on all platforms. . Libtool supports generation of C, C++, Fortran and Java libraries. Package: libusb-0.1-4 Priority: optional Section: libs Installed-Size: 104 Maintainer: Aurelien Jarno Architecture: arm Source: libusb Version: 1:0.1.8-7 Replaces: libusb0 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.2-1), debconf (>= 0.5) | debconf-2.0 Recommends: hotplug Conflicts: libusb0 Filename: pool//maemo/ossw/libu/libusb/libusb-0.1-4_0.1.8-7_arm.deb Size: 18550 MD5sum: 10788c1dc0e173a5ced2b0178f4b9d62 Description: Userspace USB programming library Library for programming USB applications without the knowledge of Linux kernel internals. . More information can be found at the Linux USB web site http://www.linux-usb.org/ . Package: libusb-dev Priority: optional Section: libdevel Installed-Size: 324 Maintainer: Aurelien Jarno Architecture: arm Source: libusb Version: 1:0.1.8-7 Replaces: libusb0 (<< 1:0.1.5-1) Depends: libusb-0.1-4 (= 1:0.1.8-7), libc6-dev Filename: pool//maemo/ossw/libu/libusb/libusb-dev_0.1.8-7_arm.deb Size: 35366 MD5sum: 613ef7ddb45be02f12ab8a371ccb069a Description: Userspace USB programming library development files Library for programming USB applications without the knowledge of Linux kernel internals. . More information can be found at the Linux USB web site http://www.linux-usb.org/ . Package: libxml2-dev Priority: optional Section: libdevel Installed-Size: 1672 Maintainer: Mike Hommey Architecture: arm Source: libxml2 Version: 2.6.7-1 Replaces: libxml2 (<= 2.6.6-1) Depends: libxml2 (= 2.6.7-1), libxml2-headers (= 2.6.7-1) Conflicts: libxml2 (<= 2.6.6-1) Filename: pool//maemo/ossw/libx/libxml2/libxml2-dev_2.6.7-1_arm.deb Size: 738760 MD5sum: e36f4c9b4333df5af640618f2ffb980d Description: Development files for the GNOME XML library XML is a metalanguage to let you design your own markup language. A regular markup language defines a way to describe information in a certain class of documents (eg HTML). XML lets you define your own customized markup languages for many classes of document. It can do this because it's written in SGML, the international standard metalanguage for markup languages. . Install this package if you wish to develop your own programs using the GNOME XML library. Package: libxml2 Priority: optional Section: libs Installed-Size: 1188 Maintainer: Mike Hommey Architecture: arm Version: 2.6.7-1 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), zlib1g (>= 1:1.2.1) Recommends: xml-core Filename: pool//maemo/ossw/libx/libxml2/libxml2_2.6.7-1_arm.deb Size: 606294 MD5sum: d32d4780abc2df209dd98f483963dd09 Description: GNOME XML library XML is a metalanguage to let you design your own markup language. A regular markup language defines a way to describe information in a certain class of documents (eg HTML). XML lets you define your own customized markup languages for many classes of document. It can do this because it's written in SGML, the international standard metalanguage for markup languages. . This package provides a library providing an extensive API to handle such XML data files. Package: libxml-parser-perl Priority: optional Section: perl Installed-Size: 692 Maintainer: Debian XML/SGML Group Architecture: arm Version: 2.34-3 Depends: perlapi-5.8.3, perl (>= 5.8.3-2), liburi-perl, libwww-perl, libc6 (>= 2.3.2.ds1-4), libexpat1 (>= 1.95.6), libgcc1 (>= 1:3.3.2-1) Filename: pool//maemo/ossw/libx/libxml-parser-perl/libxml-parser-perl_2.34-3_arm.deb Size: 288810 MD5sum: e7aa8c4fb47a908e687cf159d05d3733 Description: Perl module for parsing XML files This module provides ways to parse XML documents. It is built on top of XML::Parser::Expat, which is a lower level interface to James Clark's expat library. Each call to one of the parsing methods creates a new instance of XML::Parser::Expat which is then used to parse the document. Expat options may be provided when the XML::Parser object is created. These options are then passed on to the Expat object on each parse call. They can also be given as extra arguments to the parse methods, in which case they override options given at XML::Parser creation time. . The behavior of the parser is controlled either by Style and/or Handlers options, or by setHandlers method. These all provide mechanisms for XML::Parser to set the handlers needed by XML::Parser::Expat. If neither Style nor Handlers are specified, then parsing just checks the document for being well-formed. . When underlying handlers get called, they receive as their first parameter the Expat object, not the Parser object. Package: libxslt1.1 Priority: optional Section: libs Installed-Size: 372 Maintainer: Graham Wilson Architecture: arm Source: libxslt Version: 1.1.2-3 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.2-1), libxml2 (>= 2.6.3), zlib1g (>= 1:1.2.1) Conflicts: libxslt1 (<< 1.1.2-2) Filename: pool//maemo/ossw/libx/libxslt/libxslt1.1_1.1.2-3_arm.deb Size: 168490 MD5sum: 37594b6db52cc1fdb11b714f329964ec Description: XSLT processing library - runtime library XSLT is an XML language for defining transformations of XML files from XML to some other arbitrary format, such as XML, HTML, plain text, etc. using standard XSLT stylesheets. libxslt is a C library which implements XSLT. . This package contains libxslt library used by applications for XSLT transformations. Package: xsltproc Priority: optional Section: text Installed-Size: 160 Maintainer: Graham Wilson Architecture: arm Source: libxslt Version: 1.1.2-3 Depends: libc6 (>= 2.3.2.ds1-4), libxml2 (>= 2.6.3), libxslt1.1 (>= 1.1.2), zlib1g (>= 1:1.2.1) Filename: pool//maemo/ossw/libx/libxslt/xsltproc_1.1.2-3_arm.deb Size: 78868 MD5sum: 12574deae76b4b0c6b7906a0aedfb4a5 Description: XSLT command line processor XSLT is an XML language for defining transformations of XML files from XML to some other arbitrary format, such as XML, HTML, plain text, etc. using standard XSLT stylesheets. . This package contains a command line tool that facilitates XSLT transformations. Package: m4 Priority: standard Section: interpreters Installed-Size: 368 Maintainer: Santiago Vila Architecture: arm Version: 1.4-17 Depends: libc6 (>= 2.3.2-1) Filename: pool//maemo/ossw/m/m4/m4_1.4-17_arm.deb Size: 139192 MD5sum: 82b9ad85fdce927e12efebfcfb6400bb Description: a macro processing language GNU `m4' is an implementation of the traditional UNIX macro processor. It is mostly SVR4 compatible, although it has some extensions (for example, handling more than 9 positional parameters to macros). `m4' also has builtin functions for including files, running shell commands, doing arithmetic, etc. Autoconf needs GNU `m4' for generating `configure' scripts, but not for running them. Package: make Priority: standard Section: devel Installed-Size: 1060 Maintainer: Manoj Srivastava Architecture: arm Version: 3.80-6 Depends: libc6 (>= 2.3.2.ds1-4) Filename: pool//maemo/ossw/m/make/make_3.80-6_arm.deb Size: 422438 MD5sum: fb0dd13cf9fbe9e1d94edc531fe12d84 Description: The GNU version of the "make" utility. GNU Make is a program that determines which pieces of a large program need to be recompiled and issues the commands to recompile them, when necessary. More information about GNU Make can be found in the `make' Info page. The upstream sources for this package are available at the location ftp://ftp.gnu.org/gnu/make/ Package: man-db Priority: important Section: doc Installed-Size: 1372 Maintainer: Colin Watson Architecture: arm Version: 2.4.2-14 Replaces: man, nlsutils Provides: man, man-browser Depends: groff-base (>= 1.17.2-2), bsdmainutils, debconf (>= 1.2.0), dpkg (>= 1.9.0), libc6 (>= 2.3.2.ds1-4), libgdbm3 Suggests: groff Conflicts: man, suidmanager (<< 0.50) Filename: pool//maemo/ossw/m/man-db/man-db_2.4.2-14_arm.deb Size: 560558 MD5sum: 9597f9b9523bd456b4cecfb2c4a29e8b Description: The on-line manual pager This package provides the man command, the primary way of examining the on-line help files (manual pages). Other utilities provided include the whatis and apropos commands for searching the manual page database, the manpath utility for determining the manual page search path, and the maintenance utilities mandb, catman and zsoelim. man-db uses the groff suite of programs to format and display the manual pages. Package: matchbox-window-manager Priority: optional Section: embedded Installed-Size: 372 Maintainer: Mika Yrjölä Architecture: arm Version: 1:0.9.4-1 Replaces: matchbox (<< 1:0.8.2) Depends: libc6 (>= 2.3.2.ds1-4), libglib2.0-0 (>= 2.6.0), libmatchbox1 (>= 1.5-2), libpango1.0-0 (>= 1.8.1), libpng12-0 (>= 1.2.5.0-4), libx11-6 | xlibs (>> 4.1.0), libxext6 | xlibs (>> 4.1.0) Filename: pool//maemo/ossw/m/matchbox-window-manager/matchbox-window-manager_0.9.4-1_arm.deb Size: 75756 MD5sum: 26d98842baf0e4eff612980cc9c94840 Description: window manager for resource-limited systems Matchbox is a base environment for the X Window System running on non-desktop embedded platforms such as handhelds, set-top boxes, kiosks and anything else for which screen space, input mechanisms or system resources are limited. . This package contains the Matchbox window manager. Package: mawk Priority: required Section: base Installed-Size: 224 Maintainer: James Troup Architecture: arm Version: 1.3.3-11osso1 Provides: awk Pre-Depends: libc6 (>= 2.3.2.ds1-4) Filename: pool//maemo/ossw/m/mawk/mawk_1.3.3-11osso1_arm.deb Size: 78992 MD5sum: 9d31f1ef4b3d9847c1aa5fb6d1d75921 Description: a pattern scanning and text processing language Mawk is an interpreter for the AWK Programming Language. The AWK language is useful for manipulation of data files, text retrieval and processing, and for prototyping and experimenting with algorithms. Mawk is a new awk meaning it implements the AWK language as defined in Aho, Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms to the POSIX 1003.2 (draft 11.3) definition of the AWK language which contains a few features not described in the AWK book, and mawk provides a small number of extensions. . Mawk is smaller and much faster than gawk. It has some compile-time limits such as NF = 32767 and sprintf buffer = 1020. Package: module-init-tools Priority: standard Section: admin Installed-Size: 284 Maintainer: Marco d'Itri Architecture: arm Version: 3.0-pre9-1 Depends: libc6 (>= 2.3.2.ds1-4) Conflicts: modutils (<= 2.4.21-1) Filename: pool//maemo/ossw/m/module-init-tools/module-init-tools_3.0-pre9-1_arm.deb Size: 65666 MD5sum: dd5ad5751a20bdc03ed54b5f6f393f14 Description: tools for managing Linux kernel modules This package contains a set of programs for loading, inserting, and removing kernel modules for Linux (versions 2.5.48 and above). It serves the same function that the "modutils" package serves for Linux 2.4. Package: libsm-dev Priority: optional Section: libdevel Installed-Size: 136 Maintainer: Riku Voipio Architecture: arm Source: sm Version: 1:6.0.4-2 Replaces: xlibs-dev (<< 4.3.0) Depends: libsm6 (= 1:6.0.4-2), x-dev, libice-dev, libc6-dev | libc-dev Conflicts: xlibs-dev (<< 4.3.0) Filename: pool//maemo/ossw/s/sm/libsm-dev_6.0.4-2_arm.deb Size: 21930 MD5sum: f6587736e0190cd27cc6bfe9bfc509a7 Description: X Window System Session Management library development files Header files and a static version of the SM library are provided by this package. . See the libsm6 package for further information. Package: libsm6 Priority: optional Section: libs Installed-Size: 84 Maintainer: Riku Voipio Architecture: arm Source: sm Version: 1:6.0.4-2 Replaces: xlibs (<< 4.3.0) Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libice6 | xlibs (>> 4.1.0) Conflicts: xlibs (<< 4.3.0) Filename: pool//maemo/ossw/s/sm/libsm6_6.0.4-2_arm.deb Size: 16622 MD5sum: 727de4532ae26814b12f89dda1ecc17f Description: X Window System Session Management library libSM provides an interface to XSMP, the X Session Management Protocol. XSMP is a protocol that facilitates the management of groups of client applications by a session manager. The session manager can cause clients to save their state, to shut down, and to be restarted into a previously saved state. This protocol is layered on top of the X Consortium's ICE protocol (see the libice6 package). Package: gtk2-engines-sapwood Priority: optional Section: graphics Installed-Size: 72 Maintainer: Tommi Komulainen Architecture: arm Source: sapwood Version: 1.12-1 Depends: libatk1.0-0 (>= 1.6.0), libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libglib2.0-0 (>= 2.6.0), libgtk2.0-0 (>= 1:2.6.4-8), libpango1.0-0 (>= 1.8.1) Filename: pool//maemo/ossw/s/sapwood/gtk2-engines-sapwood_1.12-1_arm.deb Size: 24030 MD5sum: 04a130d420a64791b1da2c3ca5f6b557 Description: Pixbuf-based theme for GTK+ 2.x This package contains a pixbuf-based 'theme' that allows you to configure the look of GTK-using programs. The programs need no modifications to use themes; the support is built into GTK+. Package: gtk2-engines-sapwood Priority: optional Section: graphics Installed-Size: 68 Maintainer: Tommi Komulainen Architecture: arm Source: sapwood Version: 1.20-1 Depends: libatk1.0-0 (>= 1.6.0), libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libglib2.0-0 (>= 2.6.0), libgtk2.0-0 (>= 1:2.6.4-8), libpango1.0-0 (>= 1.8.1) Filename: pool//maemo/ossw/s/sapwood/gtk2-engines-sapwood_1.20-1_arm.deb Size: 25144 MD5sum: aadda70c67d0675ba3bc4b0c8f927ff6 Description: Pixbuf-based theme for GTK+ 2.x This package contains a pixbuf-based 'theme' that allows you to configure the look of GTK-using programs. The programs need no modifications to use themes; the support is built into GTK+. Package: sed Essential: yes Priority: required Section: base Installed-Size: 916 Maintainer: Clint Adams Architecture: arm Version: 4.0.9-1osso1 Pre-Depends: libc6 (>= 2.3.2.ds1-4) Filename: pool//maemo/ossw/s/sed/sed_4.0.9-1osso1_arm.deb Size: 211130 MD5sum: d8a2b1779ef9b7a13c0c4103984cd8dc Description: The GNU sed stream editor sed reads the specified files or the standard input if no files are specified, makes editing changes according to a list of commands, and writes the results to the standard output. Package: login Essential: yes Priority: required Section: base Installed-Size: 900 Maintainer: Karl Ramm Architecture: arm Source: shadow Version: 1:4.0.3-21osso3 Replaces: shadow-login, shadow-passwd, shellutils (<< 2.0-2), manpages-de (<= 0.4-4), manpages-fr, manpages-hu, manpages-ja Pre-Depends: libc6 (>= 2.3.2.ds1-4) Conflicts: shadow-login, secure-su, suidregister (<< 0.50) Filename: pool//maemo/ossw/s/shadow/login_4.0.3-21osso3_arm.deb Size: 273214 MD5sum: 5519109ec2c18e9e005c4e6db30f677d Description: System login tools These tools are required to be able to login and use your system. The login program invokes your user shell and enables command execution. The newgrp program is used to change your effective group ID (useful for workgroup type situations). The su program allows changing your effective user ID (useful being able to execute commands as another user). Package: passwd Priority: required Section: base Installed-Size: 1396 Maintainer: Karl Ramm Architecture: arm Source: shadow Version: 1:4.0.3-21osso3 Replaces: manpages (<= 1.15-2), manpages-de (<= 0.4-4), manpages-fr, manpages-hu, manpages-ja, manpages-ko, manpages-it Depends: libc6 (>= 2.3.2.ds1-4), login Conflicts: shadow-passwd, suidregister (<< 0.50), debconf (<< 0.5) Filename: pool//maemo/ossw/s/shadow/passwd_4.0.3-21osso3_arm.deb Size: 421000 MD5sum: 0a7a2b5f1e6634624780ec247ed027f1 Description: Change and administer password and group data This package includes passwd, chsh, chfn, and many other programs to maintain password and group data. . Shadow passwords are supported. See /usr/share/doc/passwd/README.Debian Package: shared-mime-info Priority: optional Section: misc Installed-Size: 820 Maintainer: Filip Van Raemdonck Architecture: arm Version: 0.15-1 Depends: libc6 (>= 2.3.2.ds1-4), libglib2.0-0 (>= 2.4.1), libxml2 (>= 2.6.7), zlib1g (>= 1:1.2.1) Filename: pool//maemo/ossw/s/shared-mime-info/shared-mime-info_0.15-1_arm.deb Size: 173820 MD5sum: da6b49373a663393f44e8acdaa26f1db Description: FreeDesktop.org shared MIME database and spec This is the shared MIME-info database from the X Desktop Group. It is required by any program complying to the Shared MIME-Info Database spec, which is also included in this package. . At this time, only ROX uses this database. GNOME and KDE are expected to follow soon, and hopefully others too. Origin: Debian Bugs: debbugs://bugs.debian.org/ Package: slang1-utf8-dev Priority: extra Section: devel Installed-Size: 900 Maintainer: Jim Mintha Architecture: arm Source: slang Version: 1.4.9-2 Provides: slang-dev6 Depends: slang1a-utf8 (= 1.4.9-2), libc6-dev | libc-dev Conflicts: slang1-dev, slang-dev6, slang0.99.34-dev (<< 0.99.38-2.3) Filename: pool//maemo/ossw/s/slang/slang1-utf8-dev_1.4.9-2_arm.deb Size: 349584 MD5sum: 21180d50479353015ae58de8734f7ebe Description: The S-Lang programming library, development version with utf8 support S-Lang is a C programmer's library that includes routines for the rapid development of sophisticated, user friendly, multi-platform applications. . The S-Lang library includes the following: * Low level tty input routines for reading single characters at a time. * Keymap routines for defining keys and manipulating multiple keymaps. * A high-level key processing interface (SLkp) for handling function and arrow keys. * High level screen management routines for manipulating both monochrome and color terminals. These routines are very efficient. (SLsmg) * Low level terminal-independent routines for manipulating the display of a terminal. (SLtt) * Routines for reading single line input with line editing and recall capabilities. (SLrline) * Searching functions: both ordinary searches and regular expression searches. (SLsearch) * An embedded stack-based language interpreter with a C-like syntax. This package has wide character support Package: slang1a-utf8 Priority: required Section: libs Installed-Size: 548 Maintainer: Jim Mintha Architecture: arm Source: slang Version: 1.4.9-2 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1) Conflicts: slang1-utf8 Filename: pool//maemo/ossw/s/slang/slang1a-utf8_1.4.9-2_arm.deb Size: 291154 MD5sum: 16acd9d84befc304ed9795dec2549fd7 Description: The S-Lang programming library with utf8 support S-Lang is a C programmer's library that includes routines for the rapid development of sophisticated, user friendly, multi-platform applications. . This package contains only the shared library libslang.so.* and copyright information. It is only necessary for programs that use this library (such as jed and slrn). If you plan on doing development with S-Lang, you will need the companion -dev package as well. This packages has wide character support. Package: libsqlite0-dev Priority: optional Section: libdevel Installed-Size: 552 Maintainer: Andreas Rottmann Architecture: arm Source: sqlite Version: 2.8.13-2 Replaces: libsqlite-dev (<< 2.7.0) Provides: libsqlite-dev Depends: libsqlite0 (= 2.8.13-2), libc6-dev Suggests: sqlite-doc Conflicts: libsqlite-dev Filename: pool//maemo/ossw/s/sqlite/libsqlite0-dev_2.8.13-2_arm.deb Size: 209586 MD5sum: e65c1dfb39424ba6abbfcfa9a4bfba0c Description: SQLite development files SQLite is a C library that implements an SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process. . This package contains the development files (headers, static libraries) Package: libsqlite0 Priority: optional Section: libs Installed-Size: 380 Maintainer: Andreas Rottmann Architecture: arm Source: sqlite Version: 2.8.13-2 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1) Pre-Depends: debconf (>= 0.2.17) Filename: pool//maemo/ossw/s/sqlite/libsqlite0_2.8.13-2_arm.deb Size: 160220 MD5sum: af8edc5369f2255d2682c9896d49ea5d Description: SQLite shared library SQLite is a C library that implements an SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process. Package: sqlite Priority: optional Section: misc Installed-Size: 76 Maintainer: Andreas Rottmann Architecture: arm Version: 2.8.13-2 Depends: libc6 (>= 2.3.2.ds1-4), libreadline4 (>= 4.3-1), libsqlite0 (>= 2.8.13) Suggests: sqlite-doc Filename: pool//maemo/ossw/s/sqlite/sqlite_2.8.13-2_arm.deb Size: 19294 MD5sum: 5a3a3d177d92b1976c3a888d99be5324 Description: A command line interface for SQLite SQLite is a C library that implements an SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process. Package: sudo Priority: optional Section: admin Installed-Size: 348 Maintainer: Bdale Garbee Architecture: arm Version: 1.6.7p5-1osso1.12 Depends: libc6 (>= 2.3.2.ds1-4) Filename: pool//maemo/ossw/s/sudo/sudo_1.6.7p5-1osso1.12_arm.deb Size: 149680 MD5sum: 62a6c3a0049e43ea44d7a1203c86e3ce Description: Provide limited super user privileges to specific users Sudo is a program designed to allow a sysadmin to give limited root privileges to users and log root activity. The basic philosophy is to give as few privileges as possible but still allow people to get their work done. Package: klogd Priority: important Section: base Installed-Size: 128 Maintainer: Martin Schulze Architecture: arm Source: sysklogd Version: 1.4.1-16osso1 Replaces: sysklogd Provides: linux-kernel-log-daemon Depends: libc6 (>= 2.3.2.ds1-4), sysklogd | system-log-daemon Conflicts: sysklogd (<= 1.3-33) Filename: pool//maemo/ossw/s/sysklogd/klogd_1.4.1-16osso1_arm.deb Size: 38156 MD5sum: c3c3548b400662309c8f7146debdf9fc Description: Kernel Logging Daemon The klogd daemon listens to kernel message sources and is responsible for prioritizing and processing operating system messages. The klogd daemon can run as a client of syslogd or optionally as a standalone program. Klogd can now be used to decode EIP addresses if it can determine a System.map file. Package: sysklogd Priority: important Section: base Installed-Size: 204 Maintainer: Martin Schulze Architecture: arm Version: 1.4.1-16osso1 Replaces: syslogd Provides: syslogd, system-log-daemon Depends: libc6 (>= 2.3.2.ds1-4), klogd | linux-kernel-log-daemon Conflicts: syslogd Filename: pool//maemo/ossw/s/sysklogd/sysklogd_1.4.1-16osso1_arm.deb Size: 56430 MD5sum: 920fd91427bbf0090a01537628faf42e Description: System Logging Daemon This package implements the system log daemon, which is an enhanced version of the standard Berkeley utility program. It is responsible for providing logging of messages received from programs and facilities on the local host as well as from remote hosts. Package: initscripts Priority: required Section: base Installed-Size: 176 Maintainer: Miquel van Smoorenburg Architecture: arm Source: sysvinit Version: 2.85-22.osso4 Replaces: sysvinit (<< 2.85-12), libc6, libc6.1, libc0.1, libc0.3 Depends: libc6 (>= 2.3.2.ds1-4) Conflicts: kbd (<< 0.95-2), mdutils (<< 0.35-9) Filename: pool//maemo/ossw/s/sysvinit/initscripts_2.85-22.osso4_arm.deb Size: 19602 MD5sum: 85005b93bf0dba98edcae120fd661daa Description: Standard scripts needed for booting and shutting down These scripts are meant for standard Debian/GNU/Linux installations. Package: sysvinit Essential: yes Priority: required Section: base Installed-Size: 312 Maintainer: Miquel van Smoorenburg Architecture: arm Version: 2.85-22.osso4 Replaces: last, bsdutils (<= 2.0-2) Depends: coreutils Pre-Depends: libc6 (>= 2.3.2.ds1-4), initscripts, sysv-rc (>= 2.85-2) | file-rc (>> 0.7.0) Conflicts: last Filename: pool//maemo/ossw/s/sysvinit/sysvinit_2.85-22.osso4_arm.deb Size: 92070 MD5sum: 554d3ad734262d0fe304a7692471451c Description: System-V like init Init is the first program to run after your system is booted, and continues to run as process number 1 until your system halts. Init's job is to start other programs that are essential to the operation of your system. All processes are descended from init. For more information, see the manual page init(8). Package: libncurses5-dev Priority: optional Section: libdevel Installed-Size: 5216 Maintainer: Daniel Jacobowitz Architecture: arm Source: ncurses Version: 5.4-3 Replaces: ncurses-dev, ncurses-developer, libncurses-dev Provides: libncurses-dev, ncurses-dev Depends: libncurses5 (= 5.4-3), libc-dev Conflicts: ncurses-dev, ncurses-developer, libncurses-dev Filename: pool//maemo/ossw/n/ncurses/libncurses5-dev_5.4-3_arm.deb Size: 1060730 MD5sum: bdfc62bc07228f867e21ae068bbddcd8 Description: Developer's libraries and docs for ncurses This package contains the header files, static libraries and symbolic links that developers using ncurses will need. It also includes the libraries' man pages and other documentation. Package: libncurses5 Priority: required Section: base Installed-Size: 520 Maintainer: Daniel Jacobowitz Architecture: arm Source: ncurses Version: 5.4-3 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1) Filename: pool//maemo/ossw/n/ncurses/libncurses5_5.4-3_arm.deb Size: 272932 MD5sum: 58f5a2dfbb1649e477c5637ddb25e902 Description: Shared libraries for terminal handling This package contains the shared libraries necessary to run programs compiled with ncurses. Package: net-tools Priority: important Section: net Installed-Size: 748 Maintainer: Bernd Eckenfels Architecture: arm Version: 1.60-10 Replaces: netbase (<< 4.00) Depends: libc6 (>= 2.3.2.ds1-4) Filename: pool//maemo/ossw/n/net-tools/net-tools_1.60-10_arm.deb Size: 248256 MD5sum: 992ca4b23de505c2b78af4436d335cb9 Description: The NET-3 networking toolkit This package includes the important tools for controlling the network subsystem of the Linux kernel. This includes arp, ifconfig, netstat, rarp, nameif and route. Additionally, this package contains utilities relating to particular network hardware types (plipconfig, slattach, mii-tool) and advanced aspects of IP configuration (iptunnel, ipmaddr). . In the upstream package 'hostname' and friends are included. Those are not installed by this package, since there is a special "hostname*.deb". Package: ssh Priority: standard Section: net Installed-Size: 1548 Maintainer: Matthew Vernon Architecture: arm Source: openssh Version: 1:3.8p1-3osso2 Provides: rsh-client Depends: libc6 (>= 2.3.2.ds1-4), libssl0.9.7, zlib1g (>= 1:1.2.1), debconf (>= 1.2.0), adduser (>= 3.9), dpkg (>= 1.9.0) Suggests: ssh-askpass, xbase-clients, dnsutils Conflicts: ssh-nonfree (<< 2), ssh-socks, ssh2, sftp, rsh-client (<< 0.16.1-1) Filename: pool//maemo/ossw/o/openssh/ssh_3.8p1-3osso2_arm.deb Size: 686408 MD5sum: c76c52a1d35c07fc556839c745612efb Description: Secure rlogin/rsh/rcp replacement (OpenSSH) This is the portable version of OpenSSH, a free implementation of the Secure Shell protocol as specified by the IETF secsh working group. . Ssh (Secure Shell) is a program for logging into a remote machine and for executing commands on a remote machine. It provides secure encrypted communications between two untrusted hosts over an insecure network. X11 connections and arbitrary TCP/IP ports can also be forwarded over the secure channel. It is intended as a replacement for rlogin, rsh and rcp, and can be used to provide applications with a secure communication channel. . This package provides both the ssh client and the sshd server. . -------------------------------------------------------------------- . In some countries it may be illegal to use any encryption at all without a special permit. Package: libssl-dev Priority: optional Section: libdevel Installed-Size: 6648 Maintainer: Christoph Martin Architecture: arm Source: openssl Version: 0.9.7e-4.osso1 Depends: libssl0.9.7 (= 0.9.7e-4.osso1) Conflicts: ssleay (<< 0.9.2b), libssl08-dev, libssl09-dev, libssl095a-dev, libssl096-dev Filename: pool//maemo/ossw/o/openssl/libssl-dev_0.9.7e-4.osso1_arm.deb Size: 2433300 MD5sum: 7285d8ce4527bcbf706727d8c9bf973a Description: SSL development libraries, header files and documentation libssl and libcrypt development libraries, header files and manpages . It is part of the OpenSSL implementation of SSL. Package: libssl0.9.7 Priority: standard Section: libs Installed-Size: 1192 Maintainer: Christoph Martin Architecture: arm Source: openssl Version: 0.9.7e-4.osso1 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), debconf (>= 0.5) | debconf-2.0 Conflicts: ssleay (<< 0.9.2b), libssl, openssl (<< 0.9.6-2), libssl096-dev (<< 0.9.6-2) Filename: pool//maemo/ossw/o/openssl/libssl0.9.7_0.9.7e-4.osso1_arm.deb Size: 572614 MD5sum: 824a1aab08e3eb6df35d11fddeea29c9 Description: SSL shared libraries libssl and libcrypto shared libraries needed by programs like apache-ssl, telnet-ssl and openssh. . It is part of the OpenSSL implementation of SSL. Package: osso-esd Priority: optional Section: libs Installed-Size: 172 Maintainer: Makoto Sugano Architecture: arm Version: 0.5-2 Depends: libaudiofile0 (>= 0.2.3-4), libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1) Filename: pool//maemo/ossw/o/osso-esd/osso-esd_0.5-2_arm.deb Size: 57164 MD5sum: 49e0d1c2736b1dc4229568b75e62c981 Description: Enlightenment Sound Daemon ESD sound daemon. Package: osso-esd-dev Priority: optional Section: devel Installed-Size: 232 Maintainer: Makoto Sugano Architecture: arm Source: osso-esd Version: 0.5-2 Depends: osso-esd (= 0.5-2), libaudiofile-dev, osso-dsp-headers Filename: pool//maemo/ossw/o/osso-esd/osso-esd-dev_0.5-2_arm.deb Size: 58306 MD5sum: f40b2e6692d168f5ee9c95f0715930e1 Description: ESD development files ESD sound daemon development files. Package: libosso-gnomevfs2-0 Priority: optional Section: libs Installed-Size: 372 Maintainer: Johan Hedberg Architecture: arm Source: osso-gnome-vfs2 Version: 2.8.4.4-1 Replaces: libgnomevfs2-0 Provides: libgnomevfs2-0 Depends: dbus-1 (>= 0.23.1), dbus-glib-1 (>= 0.23.1), libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libgconf2-6 (>= 2.6.4), libglib2.0-0 (>= 2.6.0), libxml2 (>= 2.6.7), zlib1g (>= 1:1.2.1), libosso-gnomevfs2-common (>= 2.8.4.4-1) Conflicts: libgnomevfs2-0 Filename: pool//maemo/ossw/o/osso-gnome-vfs2/libosso-gnomevfs2-0_2.8.4.4-1_arm.deb Size: 147376 MD5sum: 7752849569646da6c98eece1cf54713f Description: The GNOME virtual file-system libraries (for GNOME2) GNOME VFS is the GNOME virtual file system. It is the foundation of the Nautilus file manager. It provides a modular architecture and ships with several modules that implement support for file systems, http, ftp and others. It provides a URI-based API, a backend supporting asynchronous file operations, a MIME type manipulation library and other features. . This package is a patched version of gnome-vfs in GNOME2. Package: libosso-gnomevfs2-common Priority: optional Section: devel Installed-Size: 1580 Maintainer: Johan Hedberg Architecture: arm Source: osso-gnome-vfs2 Version: 2.8.4.4-1 Replaces: libgnomevfs2-dev (<< 2.6.0), libgnome2-common (<< 2.6.0), gnome-vfs-extras2, gnome-vfs-sftp, libgnomevfs2-common Provides: libgnomevfs2-common Depends: dbus-1 (>= 0.23.1), dbus-glib-1 (>= 0.23.1), libbz2-1.0, libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libgconf2-6 (>= 2.6.4), libglib2.0-0 (>= 2.6.0), libosso-gnomevfs2-0 (>= 2.8.4.4), libpopt0 (>= 1.7), libxml2 (>= 2.6.7), zlib1g (>= 1:1.2.1), gnome-mime-data, shared-mime-info, gconf2 (>= 2.6.0) Conflicts: gnome-vfs-extras2, gnome-vfs-sftp, libgnomevfs2-common Filename: pool//maemo/ossw/o/osso-gnome-vfs2/libosso-gnomevfs2-common_2.8.4.4-1_arm.deb Size: 289612 MD5sum: c3d8a15a1700e3a6762fd98ceb805105 Description: The GNOME virtual file-system library common files (for GNOME2) GNOME VFS is the GNOME virtual file system. It is the foundation of the Nautilus file manager. It provides a modular architecture and ships with several modules that implement support for file systems, http, ftp and others. It provides a URI-based API, a backend supporting asynchronous file operations, a MIME type manipulation library and other features. . This package is a patched version of gnome-vfs in GNOME2. Package: libosso-gnomevfs2-dev Priority: optional Section: libdevel Installed-Size: 872 Maintainer: Johan Hedberg Architecture: arm Source: osso-gnome-vfs2 Version: 2.8.4.4-1 Replaces: libgnomevfs2-common (<< 2.2.5-1), libgnomevfs2-dev Provides: libgnomevfs2-dev Depends: libosso-gnomevfs2-common, libosso-gnomevfs2-0 (= 2.8.4.4-1), libc6-dev, libgconf2-dev (>= 2.6.0), libxml2-dev Conflicts: libgnomevfs2-common (<< 2.2.5-1), libgnomevfs2-dev Filename: pool//maemo/ossw/o/osso-gnome-vfs2/libosso-gnomevfs2-dev_2.8.4.4-1_arm.deb Size: 232750 MD5sum: 73a34f6ef33ee2e41b23ca64c4a6ccb2 Description: The GNOME virtual file-system development files (for GNOME2) This package provides the necessary development libraries for writing GNOME VFS modules and applications that use the GNOME VFS APIs. . This package is a patched version of gnome-vfs in GNOME2. Package: libossomime-dev Priority: optional Section: devel Installed-Size: 192 Maintainer: Johan Hedberg Architecture: arm Source: osso-gnomevfs-extra Version: 1.2.14-1 Depends: libossomime0 (= 1.2.14-1), libosso-gnomevfs2-dev (>= 2.8.3-5), dbus-glib-1-dev Filename: pool//maemo/ossw/o/osso-gnomevfs-extra/libossomime-dev_1.2.14-1_arm.deb Size: 18848 MD5sum: 1a72e74f54e072d715a8f692b80b67a3 Description: libossomime development files Development files for the libossomime package. Package: libossomime0 Priority: optional Section: libs Installed-Size: 56 Maintainer: Johan Hedberg Architecture: arm Source: osso-gnomevfs-extra Version: 1.2.14-1 Depends: dbus-1 (>= 0.23.1), dbus-glib-1 (>= 0.23.1), libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libglib2.0-0 (>= 2.6.0), libosso-gnomevfs2-0 (>= 2.8.4.4), osso-update-category-database (= 1.2.14-1) Filename: pool//maemo/ossw/o/osso-gnomevfs-extra/libossomime0_1.2.14-1_arm.deb Size: 19776 MD5sum: c79ca35ab68957e650eee958465e4940 Description: Library for activating an application to handle a certain mime type This package contains a library for activating an application to handle a certain mime type. Package: osso-gnomevfs-extra-dev Priority: optional Section: devel Installed-Size: 24 Maintainer: Johan Hedberg Architecture: arm Source: osso-gnomevfs-extra Version: 1.2.14-1 Depends: osso-gnomevfs-extra (= 1.2.14-1), libosso-gnomevfs2-dev (>= 2.8.3-5), libglib2.0-dev Filename: pool//maemo/ossw/o/osso-gnomevfs-extra/osso-gnomevfs-extra-dev_1.2.14-1_arm.deb Size: 4680 MD5sum: 079fc820253bbe05baddbc45446865e7 Description: OSSO GnomeVFS Extra Development files Development files for the osso-gnome-vfs-extra package. Package: osso-gnomevfs-extra Priority: optional Section: libs Installed-Size: 224 Maintainer: Johan Hedberg Architecture: arm Version: 1.2.14-1 Replaces: osso-gnomevfs-backend Provides: osso-gnomevfs-backend Depends: dbus-1 (>= 0.23.1), dbus-glib-1 (>= 0.23.1), libatk1.0-0 (>= 1.6.0), libc6 (>= 2.3.2.ds1-4), libexpat1 (>= 1.95.6), libgcc1 (>= 1:3.3.3-1), libgconf2-6 (>= 2.6.4), libglib2.0-0 (>= 2.6.0), libgtk2.0-0 (>= 1:2.6.4-8), libopenobex-1.0-0 (>= 1.0.0-rel), libosso-gnomevfs2-0 (>= 2.8.4.4), libpango1.0-0 (>= 1.8.1), libxml2 (>= 2.6.7), osso-gwobex, zlib1g (>= 1:1.2.1) Conflicts: osso-gnomevfs-backend Filename: pool//maemo/ossw/o/osso-gnomevfs-extra/osso-gnomevfs-extra_1.2.14-1_arm.deb Size: 69800 MD5sum: 1c36effa3756f8ee0baddb4bc229de13 Description: OSSO GnomeVFS Extra This package contains extra parts to GnomeVFS developed for Nokia. * A GnomeVFS daemon using D-BUS instead of ORBit * An OBEX GnomeVFS module * Modified filemodule that uses D-BUS to emit monitor events * Small library to retrieve the capabilities object from a remote devices. * The GnomeVFS file backend for the GTK+ file chooser. * Libossomime, small library for starting applications through D-BUS based on mime type. Package: osso-update-category-database Priority: optional Section: misc Installed-Size: 40 Maintainer: Johan Hedberg Architecture: arm Source: osso-gnomevfs-extra Version: 1.2.14-1 Depends: libc6 (>= 2.3.2.ds1-4), libglib2.0-0 (>= 2.6.0), libxml2 (>= 2.6.7), zlib1g (>= 1:1.2.1) Filename: pool//maemo/ossw/o/osso-gnomevfs-extra/osso-update-category-database_1.2.14-1_arm.deb Size: 15396 MD5sum: 3bab40343b6355d184b81d12e61f45b2 Description: Tool for managing the mime/category database This package contains a tool that manages the mime/category mapping database. Package: osso-gwobex Priority: optional Section: libs Installed-Size: 68 Maintainer: Johan Hedberg Architecture: arm Version: 0.26.1 Depends: libopenobex-1.0-0, libglib2.0-0 Filename: pool//maemo/ossw/o/osso-gwobex/osso-gwobex_0.26.1_arm.deb Size: 10956 MD5sum: 1084fad5f21515527ff7d32bcd12f535 Description: GW OBEX Library This package contais a generic obex library. The primary target user of this library is the OBEX gnome-vfs module. Package: outo Priority: optional Section: utils Installed-Size: 88 Maintainer: Tommi Leino Architecture: arm Version: 0.1.1-2 Depends: libc6 (>= 2.3.2.ds1-4) Filename: pool//maemo/ossw/o/outo/outo_0.1.1-2_arm.deb Size: 10140 MD5sum: 4af60008c38a99f2071907e51889e49e Description: A simple unit tester for C/C++ Package: osso-app-killer Priority: optional Section: base Installed-Size: 80 Maintainer: Kimmo Hämäläinen Architecture: arm Version: 0.4-3 Depends: dbus-1 (>= 0.23.1), dbus-glib-1 (>= 0.23.1), libc6 (>= 2.3.2.ds1-4), libglib2.0-0 (>= 2.6.0), libosso1 (>= 0.8.9-1) Filename: pool//maemo/ossw/o/osso-app-killer/osso-app-killer_0.4-3_arm.deb Size: 12150 MD5sum: a2dd1251a92756e3d5d06264a4a80fc5 Description: Program for shutting down applications on request. This package contains the application killer program of the Application Framework. The killer listens to D-BUS system bus for requests from e.g. DSM, Backup application, etc. to shut down GUI applications. Package: osso-screenshot-tool Priority: optional Section: graphics Installed-Size: 16 Maintainer: Tommi Komulainen Architecture: arm Version: 1.20-1 Depends: libatk1.0-0 (>= 1.6.0), libc6 (>= 2.3.2.ds1-4), libglib2.0-0 (>= 2.6.0), libgtk2.0-0 (>= 1:2.6.4-8), libpango1.0-0 (>= 1.8.1) Filename: pool//maemo/ossw/o/osso-screenshot-tool/osso-screenshot-tool_1.20-1_arm.deb Size: 3842 MD5sum: 68383f48c234c6871526547572a2f33a Description: Screenshot tool This tool allows you to take a screenshot of the current screen and save the image in a PNG file. Package: osso-teema-testapp Priority: optional Section: web Installed-Size: 696 Maintainer: Rajesh Architecture: arm Version: 0.4 Depends: hildon-libs-dev, libgtk2.0-dev Filename: pool//maemo/ossw/o/osso-teema-testapp/osso-teema-testapp_0.4_arm.deb Size: 205280 MD5sum: 4f246dda362f982550863c149c1b1269 Description: Test Application for Teema testing Package: osso-thumbnail0-dbg Priority: optional Section: libs Installed-Size: 200 Maintainer: Andrey Kochanov Architecture: arm Source: osso-thumbnail Version: 0.3.1-1 Filename: pool//maemo/ossw/o/osso-thumbnail/osso-thumbnail0-dbg_0.3.1-1_arm.deb Size: 97496 MD5sum: 052584436295bb67f1fa06db5ea277d9 Description: OSSO Thumbnail library (with debug info) Package: osso-thumbnail0 Priority: optional Section: libs Installed-Size: 40 Maintainer: Andrey Kochanov Architecture: arm Source: osso-thumbnail Version: 0.3.1-1 Depends: dbus-1 (>= 0.23.1), dbus-glib-1 (>= 0.23.1), libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libgconf2-6 (>= 2.6.4), libglib2.0-0 (>= 2.6.0), libgtk2.0-0 (>= 1:2.6.4-8), libosso-gnomevfs2-0 (>= 2.8.4.4) Conflicts: osso-thumbnail0 (<< 0.3.0), osso-thumbnail-libid3 (<< 0.3.0) Filename: pool//maemo/ossw/o/osso-thumbnail/osso-thumbnail0_0.3.1-1_arm.deb Size: 12672 MD5sum: 24475f77b51199c07e4ba3bb2317e65d Description: OSSO Thumbnail library Package: osso-thumbnail Priority: optional Section: libs Installed-Size: 24 Maintainer: Andrey Kochanov Architecture: arm Version: 0.3.1-1 Depends: dbus-1 (>= 0.23.1), dbus-glib-1 (>= 0.23.1), libc6 (>= 2.3.2.ds1-4), libgconf2-6 (>= 2.6.4), libglib2.0-0 (>= 2.6.0), libgtk2.0-0 (>= 1:2.6.4-8), libosso-gnomevfs2-0 (>= 2.8.4.4), libxml2 (>= 2.6.7), osso-thumbnail0 (>= 0.3.1-1), zlib1g (>= 1:1.2.1), osso-thumbnail0 Recommends: osso-thumbnailer-libid3 (>= 0.2.0) Filename: pool//maemo/ossw/o/osso-thumbnail/osso-thumbnail_0.3.1-1_arm.deb Size: 6150 MD5sum: 5779dadf04fa84b1a682568b36363cff Description: OSSO Thumbnail Image Package: osso-thumbnail-dev Priority: optional Section: devel Installed-Size: 28 Maintainer: Andrey Kochanov Architecture: arm Source: osso-thumbnail Version: 0.3.1-1 Depends: osso-thumbnail0 (= 0.3.1-1), libosso-gnomevfs2-dev, libgtk2.0-dev Filename: pool//maemo/ossw/o/osso-thumbnail/osso-thumbnail-dev_0.3.1-1_arm.deb Size: 5558 MD5sum: b3eed3fe3c83058e30a5249a8cd307a6 Description: OSSO Thumbnail library development files Package: osso-gwconnect-dev Priority: optional Section: devel Installed-Size: 40 Maintainer: Johan Hedberg Architecture: arm Source: osso-gwconnect Version: 0.70.1 Depends: libglib2.0-dev, pkg-config Filename: pool//maemo/ossw/o/osso-gwconnect/osso-gwconnect-dev_0.70.1_arm.deb Size: 9948 MD5sum: b971952638392a989d166b8658971f93 Description: header files for bluetooth connectivity This package contains some header files which may be helpful when developing applications which use the D-BUS or GConf interfaces of the osso-gwconnect package. Package: osso-gwconnect Priority: optional Section: net Installed-Size: 184 Maintainer: Johan Hedberg Architecture: arm Version: 0.70.1 Depends: dbus-1 (>= 0.23.1), dbus-glib-1 (>= 0.23.1), libbluetooth1 (>= 2.15), libc6 (>= 2.3.2.ds1-4), libgconf2-6 (>= 2.6.4), libglib2.0-0 (>= 2.6.0), gconf2 (>= 2.4.0), bluez-utils, mce, dsme, osso-bttools (>= 0.24.2) Filename: pool//maemo/ossw/o/osso-gwconnect/osso-gwconnect_0.70.1_arm.deb Size: 52792 MD5sum: a496776b1fddc21f2741cdab9d03d07c Description: bluetooth connectivity applications This package contains programs which are required for Bluetooth connectivity. These include btsearch, btsdp and btcond. Package: osso-application-installer Priority: optional Section: non-free/misc Installed-Size: 88 Maintainer: Marius Vollmer Architecture: arm Version: 1.0.03-1 Depends: fakeroot-net, osso-application-installer-l10n-engb Filename: pool//maemo/ossw/o/osso-application-installer/osso-application-installer_1.0.03-1_arm.deb Size: 22552 MD5sum: d6b1f304c1972b81f7298e291085dd81 Description: OSSO Application Installer Application which can be used to list user installed packages and remove any or all of them and install new packages. Package: osso-af-utils Priority: optional Section: base Installed-Size: 40 Maintainer: Kimmo Hämäläinen Architecture: arm Version: 0.4-1 Depends: dbus-1 (>= 0.23.1), libc6 (>= 2.3.2.ds1-4), libx11-6 | xlibs (>> 4.1.0) Filename: pool//maemo/ossw/o/osso-af-utils/osso-af-utils_0.4-1_arm.deb Size: 6402 MD5sum: 2aa7f638a2369f767d3599b577662ce1 Description: Assortment of small programs for the application framework. Assortment of small programs for the application framework. Including waitdbus, waitx. Package: patch Priority: standard Section: utils Installed-Size: 184 Maintainer: Michael Fedrowitz Architecture: arm Version: 2.5.9-1 Depends: libc6 (>= 2.3.1-1) Suggests: ed Filename: pool//maemo/ossw/p/patch/patch_2.5.9-1_arm.deb Size: 94416 MD5sum: b3d4919acf46b729d8ce24c3760285ee Description: Apply a diff file to an original Patch will take a patch file containing any of the four forms of difference listing produced by the diff program and apply those differences to an original file, producing a patched version. Package: libperl5.8 Priority: optional Section: libs Installed-Size: 28 Maintainer: Brendan O'Dea Architecture: arm Source: perl Version: 5.8.3-3 Depends: perl-base (= 5.8.3-3) Conflicts: libapache-mod-perl (<< 1.29.0.1-3) Filename: pool//maemo/ossw/p/perl/libperl5.8_5.8.3-3_arm.deb Size: 1030 MD5sum: e88dcb17562af58843271a1b4790c8e6 Description: Shared Perl library. This package is required by programs which embed a Perl interpreter to ensure that the correct version of `perl-base' is installed. It additionally contains the shared Perl library on architectures where the perl binary is linked to libperl.a (currently only i386, for performance reasons). In other cases the actual library is in the `perl-base' package. Package: perl Priority: standard Section: perl Installed-Size: 10560 Maintainer: Brendan O'Dea Architecture: arm Version: 5.8.3-3 Replaces: perl-5.005 (<< 6), perl-5.6 (<< 6), perl-doc (<< 5.8.0-1), perl-modules (<< 5.8.1-1), libdigest-md5-perl, libmime-base64-perl, libtime-hires-perl, libstorable-perl Provides: perl5, libdigest-md5-perl, libmime-base64-perl, libtime-hires-perl, libstorable-perl Depends: perl-base (= 5.8.3-3), perl-modules (>= 5.8.3-3), libc6 (>= 2.3.2.ds1-4), libdb4.0, libgcc1 (>= 1:3.3.3-1), libgdbm3 Suggests: perl-doc, libterm-readline-perl-perl Conflicts: perl-5.004 (<< 6), perl-5.005 (<< 6), perl-5.6 (<< 6), perl-doc (<< 5.8.3-1), libdigest-md5-perl (<< 2.33-1), libmime-base64-perl (<< 2.21-1), libtime-hires-perl (<< 1.52-1), libstorable-perl (<< 2.08-1) Filename: pool//maemo/ossw/p/perl/perl_5.8.3-3_arm.deb Size: 3132618 MD5sum: 4322acc35d1bff0f33d6f9917f0fa97d Description: Larry Wall's Practical Extraction and Report Language. An interpreted scripting language, known among some as "Unix's Swiss Army Chainsaw". . Perl is optimised for scanning arbitrary text files and system administration. It has built-in extended regular expression matching and replacement, a data-flow mechanism to improve security with setuid scripts and is extensible via modules that can interface to C libraries. Package: perl-base Essential: yes Priority: required Section: base Installed-Size: 2052 Maintainer: Brendan O'Dea Architecture: arm Source: perl Version: 5.8.3-3 Replaces: perl-5.005-base (<< 6), perl-5.6-base (<< 6), perl (<< 5.8.0-9), perl-modules (<< 5.8.0-9), libperl5.8 (<< 5.8.0-20), libscalar-list-utils-perl Provides: perl5-base, perlapi-5.8.0, perlapi-5.8.1, perlapi-5.8.2, perlapi-5.8.3, data-dumper, libscalar-list-utils-perl Pre-Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1) Suggests: perl Conflicts: perl-5.004-base (<< 6), perl-5.005-base (<< 6), perl-5.6-base (<< 6), data-dumper, autoconf2.13 (<< 2.13-45), libscalar-list-utils-perl (<< 1:1.13-1) Filename: pool//maemo/ossw/p/perl/perl-base_5.8.3-3_arm.deb Size: 731170 MD5sum: 4067efcfe19c597203d48b43e254edb2 Description: The Pathologically Eclectic Rubbish Lister. A scripting language with delusions of full language-hood, Perl is used in many system scripts and utilities. . This is a stripped down Perl with only essential libraries. To make full use of Perl, you'll want to install the `perl', `perl-modules' and optionally `perl-doc' packages which supplement this one. Package: pkg-config Priority: optional Section: devel Installed-Size: 124 Maintainer: Scott James Remnant Architecture: arm Source: pkgconfig Version: 0.15.0-4 Depends: libc6 (>= 2.3.2.ds1-4), libglib2.0-0 (>= 2.4.1) Suggests: libgnome-dev Filename: pool//maemo/ossw/p/pkgconfig/pkg-config_0.15.0-4_arm.deb Size: 31142 MD5sum: 2681eb587d00817c9f35bc34ee93e1b3 Description: Manage compile and link flags for libraries pkg-config is a system for managing library compile and link flags that works with automake and autoconf. . Increasingly libraries ship with ".pc" files that allow querying of the compiler and linker flags needed to use them through the pkg-config(1) program. Package: libpopt-dev Priority: optional Section: libdevel Installed-Size: 124 Maintainer: Paul Martin Architecture: arm Source: popt Version: 1.7-5 Replaces: popt Depends: libc6-dev | libc-dev, libpopt0 (= 1.7-5) Conflicts: popt Filename: pool//maemo/ossw/p/popt/libpopt-dev_1.7-5_arm.deb Size: 38024 MD5sum: e2a1ec37fbaee385174085909bb1e2f6 Description: lib for parsing cmdline parameters - development files Popt was heavily influenced by the getopt() and getopt_long() functions, but it allows more powerful argument expansion. It can parse arbitrary argv[] style arrays and automatically set variables based on command line arguments. It also allows command line arguments to be aliased via configuration files and includes utility functions for parsing arbitrary strings into argv[] arrays using shell-like rules. . This package contains the popt static library and header file. Package: libpopt0 Priority: important Section: base Installed-Size: 436 Maintainer: Paul Martin Architecture: arm Source: popt Version: 1.7-5 Replaces: popt Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1) Conflicts: popt, libpopt-dev (<= 1.4-1), rpm (<= 4.0.2-3) Filename: pool//maemo/ossw/p/popt/libpopt0_1.7-5_arm.deb Size: 28938 MD5sum: bbd80b68865b7aadf396a37ef8bb0f0f Description: lib for parsing cmdline parameters Popt was heavily influenced by the getopt() and getopt_long() functions, but it allows more powerful argument expansion. It can parse arbitrary argv[] style arrays and automatically set variables based on command line arguments. It also allows command line arguments to be aliased via configuration files and includes utility functions for parsing arbitrary strings into argv[] arrays using shell-like rules. . This package contains the runtime library and locale data. Package: posix-locales-sputnik Priority: standard Section: base Installed-Size: 2668 Maintainer: Mohammad Anwari Architecture: arm Source: posix-locales Version: 2.3.2-13osso9 Replaces: i18ndata Provides: i18ndata Depends: libc6 (>> 2.3.2) Conflicts: i18ndata Filename: pool//maemo/ossw/p/posix-locales/posix-locales-sputnik_2.3.2-13osso9_arm.deb Size: 563696 MD5sum: a626f3b35fa9d3a29a6191197e6b1c43 Description: POSIX locales for all areas Package provides locales for the languages supported. Package: ppp Priority: optional Section: base Installed-Size: 840 Maintainer: Marco d'Itri Architecture: arm Version: 2.4.2+20040202-3osso5 Replaces: ppp-pam, ppp-udeb Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), netbase, procps, makedev (>= 2.3.1-56) Conflicts: ppp-pam, ppp-udeb, pppdcapiplugin (<= 1:3.2pre3-4) Filename: pool//maemo/ossw/p/ppp/ppp_2.4.2+20040202-3osso5_arm.deb Size: 276484 MD5sum: 50537b6e55da37ad61b783ce80611aca Description: Point-to-Point Protocol (PPP) daemon The Point-to-Point Protocol (PPP) provides a standard way to transmit datagrams over a serial link, as well as a standard way for the machines at either end of the link (the "peers") to negotiate various optional characteristics of the link. Using PPP, a serial link can be used to transmit Internet Protocol (IP) datagrams, allowing TCP/IP connections between the peers. Package: prelink Priority: optional Section: admin Installed-Size: 1012 Maintainer: Andrés Roldán Architecture: arm Version: 0.0.20040520-3 Depends: libc6 (>= 2.3.2.ds1-4), libelfg0 (>= 0.8.5-1) Filename: pool//maemo/ossw/p/prelink/prelink_0.0.20040520-3_arm.deb Size: 683674 MD5sum: 6f4bfef279321023fb5b334d207543e2 Description: ELF prelinking utility to speed up dynamic linking The prelink package contains a utility which modifies ELF shared libraries and executables, so that far fewer relocations need to be resolved at runtime and thus programs come up faster. Package: procps Priority: required Section: base Installed-Size: 552 Maintainer: Craig Small Architecture: arm Version: 1:3.2.1-2 Replaces: watch, bsdutils (<< 2.9x-1) Provides: watch Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libncurses5 (>= 5.4-1) Recommends: psmisc Conflicts: watch, libproc-dev (<< 1:1.2.6-2), w-bassman (<< 1.0-3), procps-nonfree, pgrep (<< 3.3-5) Filename: pool//maemo/ossw/p/procps/procps_3.2.1-2_arm.deb Size: 202488 MD5sum: 90ecbd6b8d5073efcf45d2051728d8ec Description: The /proc file system utilities These are utilities to browse the /proc filesystem, which is not a real file system but a way for the kernel to provide information about the status of entries in its process table. (e.g. running, stopped or "zombie") Both command line and full screen utilities are provided. Ncurses is needed for the full screen utilities. More information can be found at procps website http://procps.sf.net/ Package: python2.3 Priority: standard Section: python Installed-Size: 8888 Maintainer: Matthias Klose Architecture: arm Version: 2.3.4-1 Replaces: python2.3-xmlbase Provides: python2.3-xmlbase Depends: python (>= 2.3), libbz2-1.0, libc6 (>= 2.3.2.ds1-4), libdb4.2, libgcc1 (>= 1:3.3.3-1), libncurses5 (>= 5.4-1), libreadline4 (>= 4.3-1), libssl0.9.7, zlib1g (>= 1:1.2.1) Recommends: python2.3-iconvcodec | python2.3-cjkcodecs | python2.3-japanese-codecs, python2.3-iconvcodec | python2.3-cjkcodecs | python2.3-korean-codecs Suggests: python2.3-doc Conflicts: python2.3-xmlbase, python2.3-csv Filename: pool//maemo/ossw/p/python2.3/python2.3_2.3.4-1_arm.deb Size: 2721658 MD5sum: f44648ec63196409361b0e69c8597b33 Description: An interactive high-level object-oriented language (version 2.3) Version 2.3 of the high-level, interactive object oriented language, includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. Package: libpango1.0-common Priority: optional Section: misc Installed-Size: 84 Maintainer: Sebastien Bacher Architecture: arm Source: pango1.0 Version: 1.8.1-1osso1p1 Replaces: libpango0, libpango-common (<< 1.0.0) Depends: debconf, defoma (>= 0.11.1), fontconfig (>= 2.1.91), libexpat1, libc6 (>= 2.3.2.ds1-4), libexpat1 (>= 1.95.6), libfontconfig1 (>= 2.3.2-1osso3), libfreetype6 (>= 2.1.9-1osso10), libglib2.0-0 (>= 2.6.0), libpango1.0-0 (>= 1.8.1), zlib1g (>= 1:1.2.1) Recommends: x-ttcidfont-conf Suggests: ttf-kochi-gothic, ttf-kochi-mincho, ttf-thryomanes, ttf-baekmuk, ttf-arphic-gbsn00lp, ttf-arphic-bsmi00lp, ttf-arphic-gkai00mp, ttf-arphic-bkai00mp Filename: pool//maemo/ossw/p/pango1.0/libpango1.0-common_1.8.1-1osso1p1_arm.deb Size: 16802 MD5sum: c26a9aa7dfc297a9ca5d71b5020e2d8d Description: Modules and configuration files for the Pango Pango is a library for layout and rendering of text, with an emphasis on internationalization. Pango can be used anywhere that text layout is needed. however, most of the work on Pango-1.0 was done using the GTK+ widget toolkit as a test platform. Pango forms the core of text and font handling for GTK+-2.0. . Pango is designed to be modular; the core Pango layout can be used with four different font backends: - Core X windowing system fonts - Client-side fonts on X using the Xft library - Direct rendering of scalable fonts using the FreeType library - Native fonts on Microsoft backends . This package contains the Pango modules and the configuration files which Pango needs. Package: libpango1.0-dbg Priority: extra Section: libdevel Installed-Size: 2468 Maintainer: Sebastien Bacher Architecture: arm Source: pango1.0 Version: 1.8.1-1osso1p1 Depends: libpango1.0-0 (= 1.8.1-1osso1p1) Filename: pool//maemo/ossw/p/pango1.0/libpango1.0-dbg_1.8.1-1osso1p1_arm.deb Size: 1131312 MD5sum: 0d60ee0df399a2e72bbbfb8259a940fd Description: The Pango library and debugging symbols Pango is a library for layout and rendering of text, with an emphasis on internationalization. Pango can be used anywhere that text layout is needed. however, most of the work on Pango-1.0 was done using the GTK+ widget toolkit as a test platform. Pango forms the core of text and font handling for GTK+-2.0. . Pango is designed to be modular; the core Pango layout can be used with four different font backends: - Core X windowing system fonts - Client-side fonts on X using the Xft library - Direct rendering of scalable fonts using the FreeType library - Native fonts on Microsoft backends . This package contains unstripped shared libraries. it is provided primarily to provide a backtrace with names in a debugger, this makes it somewhat easier to interpret core dumps. The libraries are installed in /usr/lib/debug and can be used by placing that directory in LD_LIBRARY_PATH. Most people will not need this package. Package: libpango1.0-dev Priority: optional Section: libdevel Installed-Size: 1052 Maintainer: Sebastien Bacher Architecture: arm Source: pango1.0 Version: 1.8.1-1osso1p1 Replaces: libpango-dev Depends: libpango1.0-0 (= 1.8.1-1osso1p1), libglib2.0-dev (>= 2.4.1-2), libfreetype6-dev (>= 2.1.3), libx11-dev | xlibs-dev, libxrender-dev | xlibs-dev, pkg-config, libxft-dev, libfontconfig1-dev (>= 2.1.91) Suggests: libpango1.0-doc Conflicts: libpango-dev Filename: pool//maemo/ossw/p/pango1.0/libpango1.0-dev_1.8.1-1osso1p1_arm.deb Size: 304058 MD5sum: 21e05f215076d6a1f3115bd9d6c24022 Description: Development files for the Pango Pango is a library for layout and rendering of text, with an emphasis on internationalization. Pango can be used anywhere that text layout is needed. however, most of the work on Pango-1.0 was done using the GTK+ widget toolkit as a test platform. Pango forms the core of text and font handling for GTK+-2.0. . Pango is designed to be modular; the core Pango layout can be used with four different font backends: - Core X windowing system fonts - Client-side fonts on X using the Xft library - Direct rendering of scalable fonts using the FreeType library - Native fonts on Microsoft backends . This package contains the header files and some files needed for development with Pango. Package: libpango1.0-0 Priority: optional Section: libs Installed-Size: 692 Maintainer: Sebastien Bacher Architecture: arm Source: pango1.0 Version: 1.8.1-1osso1p1 Depends: libpango1.0-common (>= 1.8.1-1osso1p1), libc6 (>= 2.3.2.ds1-4), libfontconfig1 (>= 2.3.2-1osso3), libfreetype6 (>= 2.1.9-1osso10), libgcc1 (>= 1:3.3.3-1), libglib2.0-0 (>= 2.6.0), libx11-6 | xlibs (>> 4.1.0), libxft2 (>= 2.1.6-1osso8), libxrender1, zlib1g (>= 1:1.2.1) Filename: pool//maemo/ossw/p/pango1.0/libpango1.0-0_1.8.1-1osso1p1_arm.deb Size: 257636 MD5sum: ec0730b0ee194e27e4ec06af128f56a2 Description: Layout and rendering of internationalized text Pango is a library for layout and rendering of text, with an emphasis on internationalization. Pango can be used anywhere that text layout is needed. however, most of the work on Pango-1.0 was done using the GTK+ widget toolkit as a test platform. Pango forms the core of text and font handling for GTK+-2.0. . Pango is designed to be modular; the core Pango layout can be used with four different font backends: - Core X windowing system fonts - Client-side fonts on X using the Xft library - Direct rendering of scalable fonts using the FreeType library - Native fonts on Microsoft backends . This package contains the shared libraries. Package: libreadline4-dev Priority: optional Section: libdevel Installed-Size: 548 Maintainer: Matthias Klose Architecture: arm Source: readline4 Version: 4.3-10 Replaces: libreadline4 (<< 2.5a) Provides: libreadline-dev Depends: libreadline4 (= 4.3-10), libncurses5-dev Conflicts: libreadline4 (<< 2.5a), libreadline-dev Filename: pool//maemo/ossw/r/readline4/libreadline4-dev_4.3-10_arm.deb Size: 204224 MD5sum: af231fb67716ba2a36539b675936d081 Description: GNU readline and history libraries, development files The GNU readline library aids in the consistency of user interface across discrete programs that need to provide a command line interface. . The GNU history library provides a consistent user interface for recalling lines of previously typed input. . This package contains as well the readline documentation in info format. Package: libreadline4 Priority: standard Section: libs Installed-Size: 340 Maintainer: Matthias Klose Architecture: arm Source: readline4 Version: 4.3-10 Replaces: libreadline4-dev (<< 2.5a) Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.2-1), libncurses5 (>= 5.3.20030510-1) Conflicts: libreadline4-dev (<< 2.5a) Filename: pool//maemo/ossw/r/readline4/libreadline4_4.3-10_arm.deb Size: 139588 MD5sum: 156c0b0c2f01fa449667232f1f0a9fa7 Description: GNU readline and history libraries, run-time libraries The GNU readline library aids in the consistency of user interface across discrete programs that need to provide a command line interface. . The GNU history library provides a consistent user interface for recalling lines of previously typed input. Package: tar Essential: yes Priority: required Section: base Installed-Size: 1424 Maintainer: Bdale Garbee Architecture: arm Version: 1.13.93-4osso1.1 Replaces: cpio Pre-Depends: libc6 (>= 2.3.2.ds1-4) Suggests: bzip2 Conflicts: cpio (<= 2.4.2-38) Filename: pool//maemo/ossw/t/tar/tar_1.13.93-4osso1.1_arm.deb Size: 493966 MD5sum: 823c023565b2878f8963bbd06522fc01 Description: GNU tar Tar is a program for packaging a set of files as a single archive in tar format. The function it performs is conceptually similar to cpio, and to things like PKZIP in the DOS world. It is heavily used by the Debian package management system, and is useful for performing system backups and exchanging sets of files with others. Package: libtiff4-dev Priority: optional Section: devel Installed-Size: 1396 Maintainer: Josip Rodin Architecture: arm Source: tiff Version: 3.6.1-4 Provides: libtiff-dev Depends: libtiff4 (= 3.6.1-4), libc6-dev Conflicts: libtiff3g-dev, libtiff3-dev, libtiff-dev Filename: pool//maemo/ossw/t/tiff/libtiff4-dev_3.6.1-4_arm.deb Size: 453502 MD5sum: 0e0aa2e44c4eed6f16ca4299e119b3e0 Description: Tag Image File Format library, development files libtiff is a library providing support for the Tag Image File Format (TIFF), a widely used format for storing image data. Included are the development files, static library and the required headers. Package: libtiff4 Priority: optional Section: libs Installed-Size: 352 Maintainer: Josip Rodin Architecture: arm Source: tiff Version: 3.6.1-4 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libjpeg62, zlib1g (>= 1:1.2.1) Filename: pool//maemo/ossw/t/tiff/libtiff4_3.6.1-4_arm.deb Size: 105540 MD5sum: d8a3e4483d125c7d235ef9374bbef74a Description: Tag Image File Format library libtiff is a library providing support for the Tag Image File Format (TIFF), a widely used format for storing image data. Included is the shared library. Package: tscalib Priority: optional Section: libs Installed-Size: 36 Maintainer: Lauri Leukkunen Architecture: arm Version: 0.0.1-3 Replaces: tslib (<< 0.0.1-8) Depends: libc6 (>= 2.3.2.ds1-4), tslib (>= 0.0.1-9) Filename: pool//maemo/ossw/t/tscalib/tscalib_0.0.1-3_arm.deb Size: 8688 MD5sum: 3442e711ccf93d69c1635811768eb17e Description: tslib touchscreen calibration tool Package: tslib-dev Priority: optional Section: devel Installed-Size: 28 Maintainer: Lauri Leukkunen Architecture: arm Source: tslib Version: 0.0.1-15 Depends: tslib (= 0.0.1-15) Filename: pool//maemo/ossw/t/tslib/tslib-dev_0.0.1-15_arm.deb Size: 1928 MD5sum: 3035bd469b6f740bf4187de5eb2a7b7d Description: tslib development files Package: tslib Priority: optional Section: libs Installed-Size: 136 Maintainer: Lauri Leukkunen Architecture: arm Version: 0.0.1-15 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), tscalib Filename: pool//maemo/ossw/t/tslib/tslib_0.0.1-15_arm.deb Size: 18236 MD5sum: ead56c41bac18d2306234ed0b2b36887 Description: tslib touchscreen library Package: udev Priority: extra Section: admin Installed-Size: 616 Maintainer: Marco d'Itri Architecture: arm Version: 0.046-1osso9 Depends: libc6 (>= 2.3.2.ds1-4), debconf (>= 0.5) | debconf-2.0, hotplug, initscripts, makedev (>= 2.3.1-70) Conflicts: lvm-common (<< 1.5.13) Filename: pool//maemo/ossw/u/udev/udev_0.046-1osso9_arm.deb Size: 207066 MD5sum: 61269f8d1b0c3c55d4b28be507e69829 Description: /dev/ management daemon udev is a program which dynamically creates and removes device nodes from /dev/. It responds to /sbin/hotplug device events and requires a 2.6 kernel. Package: udhcpc Priority: optional Section: net Installed-Size: 104 Maintainer: Eric Van Buggenhaut Architecture: arm Source: udhcp Version: 0.9.8-6osso3 Provides: dhcp-client Depends: libc6 (>= 2.3.2.ds1-4) Filename: pool//maemo/ossw/u/udhcp/udhcpc_0.9.8-6osso3_arm.deb Size: 21818 MD5sum: 670cb3c0eb202185fb5eb90c01ab8aee Description: very small DHCP client DHCP is a protocol like BOOTP (actually dhcpd includes much of the functionality of BOOTPD!). It assigns IP addresses to clients based on lease times. This package is primarily geared towards embedded systems. It does however, strive to be fully functional, and RFC compliant . This is the client-side application. Package: bsdutils Essential: yes Priority: required Section: base Installed-Size: 156 Maintainer: LaMont Jones Architecture: arm Source: util-linux (2.12-7osso2) Version: 1:2.12-7osso2 Pre-Depends: libc6 (>= 2.3.2.ds1-4) Recommends: bsdmainutils Filename: pool//maemo/ossw/u/util-linux/bsdutils_2.12-7osso2_arm.deb Size: 61326 MD5sum: 7ce63a241911b7e436ac2736fb369a69 Description: Basic utilities from 4.4BSD-Lite This package contains the bare minimum number of BSD utilities needed to boot a Debian system. You should probably also install bsdmainutils to get the remaining standard BSD utilities. . Included are: logger, renice, replay, script, wall Package: mount Essential: yes Priority: required Section: base Installed-Size: 292 Maintainer: LaMont Jones Architecture: arm Source: util-linux Version: 2.12-7osso2 Pre-Depends: libc6 (>= 2.3.2.ds1-4) Filename: pool//maemo/ossw/u/util-linux/mount_2.12-7osso2_arm.deb Size: 126940 MD5sum: 1ae8d8ec7d59904ce56c497f91cfe85b Description: Tools for mounting and manipulating filesystems This package provides the mount(8), umount(8), swapon(8), swapoff(8), and losetup(8) commands. Package: util-linux Essential: yes Priority: required Section: base Installed-Size: 968 Maintainer: LaMont Jones Architecture: arm Version: 2.12-7osso2 Replaces: miscutils, setterm, fdisk Pre-Depends: libc6 (>= 2.3.2.ds1-4), libncurses5 (>= 5.4-1), slang1a-utf8 (>> 1.4.4-7.1), zlib1g (>= 1:1.2.1) Suggests: util-linux-locales, kbd | console-tools, dosfstools Conflicts: setterm, fdisk, kbd (<< 1.05-3), console-tools (<< 1:0.2.3-21) Filename: pool//maemo/ossw/u/util-linux/util-linux_2.12-7osso2_arm.deb Size: 380076 MD5sum: b4acd871961a81f7ca7f38aaa1e71737 Description: Miscellaneous system utilities This package contains a number of important utilities, most of which are oriented towards maintenance of your system. Some of the more important utilities included in this package allow you to partition your hard disk, view kernel messages, and create new filesystems. Package: libx11-6 Priority: optional Section: libs Installed-Size: 960 Maintainer: Riku Voipio Architecture: arm Source: x11 Version: 6.2.1-4.1 Replaces: xlibs (<< 4.3.0) Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libxau0 Conflicts: xlibs (<< 4.3.0) Filename: pool//maemo/ossw/x/x11/libx11-6_6.2.1-4.1_arm.deb Size: 504442 MD5sum: 2ebc492b7c4d13c648f0e0606d18819d Description: X Window System protocol client library The libX11 library, also known as "Xlib", provides a means of communicating with an X server via the X protocol. . Xlib provides low-level functionality, dealing mostly with the wire protocol and in terms of basic operations such as opening and closing the connection to the X server, creating graphics contexts, drawing graphics primitives such as lines, arcs, and glyphs, handling events, and so forth. A set of dynamically-loadable internationalization modules is also part of this package, though not in the libX11 shared object itself. . Application programmers who are new to the X Window System will likely find one of the many "Toolkit" libraries far more convenient to program against than Xlib directly. Examples of popular toolkit libraries are GTK+, Qt, XForms, LessTif, and Athena. . libx11-6 depends on xlibs-data for locale data and the X error and keysym databases. Package: libx11-dev Priority: optional Section: libdevel Installed-Size: 2492 Maintainer: Riku Voipio Architecture: arm Source: x11 Version: 6.2.1-4.1 Replaces: xlibs-dev (<< 4.3.0) Depends: libx11-6 (= 6.2.1-4.1), x-dev, libxau-dev, libxproto-xextensions, libc6-dev | libc-dev Conflicts: xlibs-dev (<< 4.3.0) Filename: pool//maemo/ossw/x/x11/libx11-dev_6.2.1-4.1_arm.deb Size: 1202868 MD5sum: dc3045a95449ba6b22764aabfe9b959d Description: X Window System protocol client library development files Header files and a static version of the X11 library ("Xlib") are provided by this package. . See the libx11-6 package for further information. . Ideally, this package would not depend on any extension headers, as Xlib is designed to implement only the core X protocol. Nevertheless, some parts of Xlib have acquired references to extension headers over the years. Specifically, header files for the BIG-REQUESTS, XKEYBOARD, XInputExtension, and XC-MISC extensions are used internally. These dependencies are not exposed via Xlib's own external interfaces. Package: libxau-dev Priority: optional Section: libdevel Installed-Size: 92 Maintainer: Riku Voipio Architecture: arm Source: xau Version: 0.1-1 Replaces: xlibs-static-dev Depends: libxau0 (= 0.1-1), x-dev Filename: pool//maemo/ossw/x/xau/libxau-dev_0.1-1_arm.deb Size: 10754 MD5sum: 6d1158d93b5b53704ed66035f3fc9a1d Description: X authentication library - development files This library implements sample x authentication protocol, which has become the defacto standard. In this package is the headers and development stuff. Package: libxau0 Priority: optional Section: libs Installed-Size: 60 Maintainer: Riku Voipio Architecture: arm Source: xau Version: 0.1-1 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1) Filename: pool//maemo/ossw/x/xau/libxau0_0.1-1_arm.deb Size: 6652 MD5sum: 6d05f358bc161c8de6b4f5e67e0239b4 Description: X authentication library This library implements sample x authentication protocol, which has become the defacto standard. In this package is the shared runtime version. Package: libxcursor1 Priority: optional Section: libs Installed-Size: 64 Maintainer: Debian X Strike Force Architecture: arm Source: xcursor Version: 1.1.3-1 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libx11-6 | xlibs (>> 4.1.0), libxrender1 Filename: pool//maemo/ossw/x/xcursor/libxcursor1_1.1.3-1_arm.deb Size: 22680 MD5sum: ff84f7daf5e9c97bf04ad5e37cfc54e9 Description: X cursor management library Xcursor is a simple library designed to help locate and load cursors for the X Window System. Cursors can be loaded from files or memory and can exist in several sizes; the library automatically picks the best size. When using images loaded from files, Xcursor prefers to use the Render extension's CreateCursor request for rendering cursors. Where the Render extension is not supported, Xcursor maps the cursor image to a standard X cursor and uses the core X protocol CreateCursor request. Package: libxext-dev Priority: optional Section: libdevel Installed-Size: 212 Maintainer: Riku Voipio Architecture: arm Source: xext Version: 6.4.3-1 Replaces: xlibs-dev (<< 4.3.0) Depends: libxext6 (= 6.4.3-1), x-dev, libxproto-xextensions, libc6-dev | libc-dev Conflicts: xlibs-dev (<< 4.3.0) Filename: pool//maemo/ossw/x/xext/libxext-dev_6.4.3-1_arm.deb Size: 60058 MD5sum: 2c0447b092db72a1c684f5ddc4d3cc70 Description: X Window System miscellaneous extension library development files Header files and a static version of the Xext library are provided by this package. . See the libxext6 package for further information. Package: libxext6 Priority: optional Section: libs Installed-Size: 116 Maintainer: Riku Voipio Architecture: arm Source: xext Version: 6.4.3-1 Replaces: xlibs (<< 4.3.0) Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libx11-6 | xlibs (>> 4.1.0) Conflicts: xlibs (<< 4.3.0) Filename: pool//maemo/ossw/x/xext/libxext6_6.4.3-1_arm.deb Size: 26154 MD5sum: a781068cfaf826287c3d90a37de67e3a Description: X Window System miscellaneous extension library libXext provides an X Window System client interface to several extensions to the X protocol. . The supported protocol extensions are: - DOUBLE-BUFFER (DBE), the Double Buffer extension; - DPMS, the VESA Display Power Management System extension; - Extended-Visual-Information (EVI), an extension for gathering extra information about the X server's visuals; - LBX, the Low Bandwith X extension; - MIT-SHM, the MIT X client/server shared memory extension; - MIT-SUNDRY-NONSTANDARD, a miscellaneous extension by MIT; - Multi-Buffering, the multi-buffering and stereo display extension; - SECURITY, the X security extension; - SHAPE, the non-rectangular shaped window extension; - SYNC, the X synchronization extension; - TOG-CUP, the Open Group's Colormap Utilization extension; - XC-APPGROUP, the X Consortium's Application Group extension; - XC-MISC, the X Consortium's resource ID querying extension; - XTEST, the X test extension (this is one of two client-side implementations; the other is in the libXtst library, provided by the libxtst6 package); . libXext also provides a small set of utility functions to aid authors of client APIs for X protocol extensions. Package: libxfixes-dev Priority: optional Section: libdevel Installed-Size: 100 Maintainer: Riku Voipio Architecture: arm Source: xfixes Version: 2.0.2-1 Depends: libxfixes3 (= 2.0.2-1), x-dev, libxproto-fixes, libc6-dev | libc-dev Filename: pool//maemo/ossw/x/xfixes/libxfixes-dev_2.0.2-1_arm.deb Size: 13284 MD5sum: 09aa2494aca3f8ebb3cb7f08855b80d2 Description: X Fixes library - debug symbols libxfixes fixes something. This package includes headers and static libs for it. Package: libxfixes3 Priority: optional Section: libs Installed-Size: 72 Maintainer: Riku Voipio Architecture: arm Source: xfixes Version: 2.0.2-1 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libx11-6 | xlibs (>> 4.1.0) Filename: pool//maemo/ossw/x/xfixes/libxfixes3_2.0.2-1_arm.deb Size: 9914 MD5sum: c31598ce2c1a60dad9282e7b179ca7fe Description: X Fixes library libxfixes fixes something. The shared library version. Package: libxfont-dev Priority: optional Section: libdevel Installed-Size: 440 Maintainer: Riku Voipio Architecture: arm Source: xfont Version: 1.4.3-3 Depends: libxfont1 (= 1.4.3-3), x-dev Filename: pool//maemo/ossw/x/xfont/libxfont-dev_1.4.3-3_arm.deb Size: 121416 MD5sum: 5633e3fcc2dc018df3800c4aa8d39ff2 Description: X11 Font library - development files This library is used by the x11 font server (xfs) . In this package is the headers and development stuff. Package: libxfont1 Priority: optional Section: libs Installed-Size: 192 Maintainer: Riku Voipio Architecture: arm Source: xfont Version: 1.4.3-3 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), zlib1g (>= 1:1.2.1) Filename: pool//maemo/ossw/x/xfont/libxfont1_1.4.3-3_arm.deb Size: 78284 MD5sum: f24ebf3362bcefcd83493fe824fd5325 Description: X11 Font library This library is used by the x11 font server (xfs) . In this package is the shared runtime version. Package: libxft2-dbg Priority: optional Section: libs Installed-Size: 1060 Maintainer: Jakub Pavelek Architecture: arm Source: xft Version: 2.1.6-1osso8 Depends: libxft2 (= 2.1.6-1osso8) Filename: pool//maemo/ossw/x/xft/libxft2-dbg_2.1.6-1osso8_arm.deb Size: 502648 MD5sum: ba1df1f8d2078bcad85e9897588c38d3 Description: Debugging symbols for the Xft. Package: libxft-dev Priority: optional Section: libs Installed-Size: 140 Maintainer: Jakub Pavelek Architecture: arm Source: xft Version: 2.1.6-1osso8 Provides: libxft2-dev Depends: libxft2 (= 2.1.6-1osso8), libfontconfig1-dev, libfreetype6-dev Filename: pool//maemo/ossw/x/xft/libxft-dev_2.1.6-1osso8_arm.deb Size: 46410 MD5sum: 1a7bb5499691cfc05b636bd4774b54ca Description: Development package for Xft. Package: libxft2 Priority: optional Section: libs Installed-Size: 84 Maintainer: Jakub Pavelek Architecture: arm Source: xft Version: 2.1.6-1osso8 Depends: libc6 (>= 2.3.2.ds1-4), libfontconfig1 (>= 2.3.2-1osso2), libfreetype6 (>= 2.1.9-1osso9), libgcc1 (>= 1:3.3.3-1), libx11-6 | xlibs (>> 4.1.0), libxrender1, zlib1g (>= 1:1.2.1) Filename: pool//maemo/ossw/x/xft/libxft2_2.1.6-1osso8_arm.deb Size: 33998 MD5sum: 0e5185d000f433536261642d28117954 Description: FreeType-based font drawing library for X Xft provides a client-side font API for X applications, making the FreeType font rasterizer available to X clients. Fontconfig is used for font specification resolution. Where available, the RENDER extension handles glyph drawing; otherwise, the core X protocol is used. Package: libxi-dev Priority: optional Section: libdevel Installed-Size: 220 Maintainer: Riku Voipio Architecture: arm Source: xi Version: 6.0.2-1 Replaces: xlibs-dev (<< 4.3.0), libx11-dev (<< 4.3.0.dfsg.1-3) Depends: libxi6 (= 6.0.2-1), x-dev, libxext-dev, libx11-dev, libc6-dev | libc-dev Conflicts: xlibs-dev (<< 4.3.0), libx11-dev (<< 4.3.0.dfsg.1-3) Filename: pool//maemo/ossw/x/xi/libxi-dev_6.0.2-1_arm.deb Size: 63944 MD5sum: 0000970f605f97f1107e87814b5f2902 Description: X Window System Input extension library development files Header files and a static version of the Xi library are provided by this package. . See the libxi6 package for further information. . This package declares a versioned conflict with and replacement of libx11-dev because some versions of the latter package mistakenly shipped a maual page that should have been in this package intead. Package: libxi6 Priority: optional Section: libs Installed-Size: 84 Maintainer: Riku Voipio Architecture: arm Source: xi Version: 6.0.2-1 Replaces: xlibs (<< 4.3.0) Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libx11-6 | xlibs (>> 4.1.0), libxext6 | xlibs (>> 4.1.0) Conflicts: xlibs (<< 4.3.0) Filename: pool//maemo/ossw/x/xi/libxi6_6.0.2-1_arm.deb Size: 16194 MD5sum: d78cc0393cf7afe664b6aab859527869 Description: X Window System Input extension library libXi provides an X Window System client interface to the X Input Extension, an extension to the X protocol. Package: xnee Priority: optional Section: other Installed-Size: 336 Maintainer: Tapani Palli Architecture: arm Version: 1.08-1osso1 Replaces: xnee-1osso Provides: xnee-1osso Depends: libc6 (>= 2.3.2.ds1-4), libx11-6 | xlibs (>> 4.1.0), libxext6 | xlibs (>> 4.1.0), libxtst6 Conflicts: xnee-1osso Filename: pool//maemo/ossw/x/xnee/xnee_1.08-1osso1_arm.deb Size: 125602 MD5sum: e61b846b629d82a48e3cb4ff9f6d9720 Description: Xnee testing tool modified to take screenshots Package: libxpm4 Priority: optional Section: libs Installed-Size: 108 Maintainer: Riku Voipio Architecture: arm Source: xpm Version: 1:3.5.1-1 Replaces: xlibs (<< 4.3.0) Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libx11-6 | xlibs (>> 4.1.0) Conflicts: xlibs (<< 4.3.0) Filename: pool//maemo/ossw/x/xpm/libxpm4_3.5.1-1_arm.deb Size: 29856 MD5sum: 83dbfa216e4f62364005b5183c529ab2 Description: X pixmap library libXpm, the X pixmap library, is a set of routines used to store and retrieve X pixmaps (an X Window System data structure comprising a rectangular array of pixels) from files; the xpm file format is an extension of the monochrome bitmap file format in the X11 specification. (Traditionally, libXpm was maintained and distributed separately from the X Window System, but XFree86 has absorbed this library). Package: libxpm-dev Priority: optional Section: libdevel Installed-Size: 172 Maintainer: Riku Voipio Architecture: arm Source: xpm Version: 1:3.5.1-1 Replaces: xlibs-dev (<< 4.3.0) Depends: libxpm4 (= 1:3.5.1-1), libx11-dev, libc6-dev | libc-dev Conflicts: xlibs-dev (<< 4.3.0) Filename: pool//maemo/ossw/x/xpm/libxpm-dev_3.5.1-1_arm.deb Size: 41002 MD5sum: 4d2bee59be90448efa444f7f9245ab44 Description: X pixmap library development files Header files and a static version of the Xpm library are provided by this package. . See the libxpm4 package for further information. Package: libxrandr2 Priority: optional Section: libs Installed-Size: 64 Maintainer: Riku Voipio Architecture: arm Source: xrandr Version: 1:1.0.2-2 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libx11-6 | xlibs (>> 4.1.0), libxext6 | xlibs (>> 4.1.0), libxrender1 Filename: pool//maemo/ossw/x/xrandr/libxrandr2_1.0.2-2_arm.deb Size: 9100 MD5sum: 96e517621d0cf311ecdda8c6d5a1ea6b Description: X Window System Resize, Rotate and Reflection extension library libXrandr provides an X Window System client interface to the root window resizing, rotation, and reflection ("R and R") extension to the X protocol. . As with all X protocol extensions, support for the extension is required in the X server for client programs using its functionality to work as expected. The XFree86 X server does not yet support the resizing aspects of this extension. Package: libxrandr-dev Priority: optional Section: libdevel Installed-Size: 104 Maintainer: Riku Voipio Architecture: arm Source: xrandr Version: 1:1.0.2-2 Replaces: xlibs-dev (<< 4.3.0) Depends: libxrandr2 (= 1:1.0.2-2), x-dev, libxrender-dev, libxproto-randr, libxext-dev, libx11-dev, libc6-dev | libc-dev Conflicts: xlibs-dev (<< 4.3.0) Filename: pool//maemo/ossw/x/xrandr/libxrandr-dev_1.0.2-2_arm.deb Size: 15982 MD5sum: 07c2efb3e822dbde1dc8ac654dd74db0 Description: X11, Rotate and Reflection extension library development files Header files and a static version of the Xrandr library are provided by this package. . See the libxrandr2 package for further information. Package: libxrender-dev Priority: optional Section: libdevel Installed-Size: 140 Maintainer: Debian X Strike Force Architecture: arm Source: xrender Version: 0.8.4-0.3 Depends: libxrender1 (= 0.8.4-0.3), libc6-dev | libc-dev, libx11-dev, render-dev, x-dev Conflicts: xlibs-dev (<< 4.3.0) Filename: pool//maemo/ossw/x/xrender/libxrender-dev_0.8.4-0.3_arm.deb Size: 32124 MD5sum: 025e287a082f988636d33d8e40a81b4f Description: X Rendering Extension client library (development files) The X Rendering Extension (Render) introduces digital image composition as the foundation of a new rendering model within the X Window System. Rendering geometric figures is accomplished by client-side tesselation into either triangles or trapezoids. Text is drawn by loading glyphs into the server and rendering sets of them. The Xrender library exposes this extension to X clients. . This package provides a static library and C header files. Package: libxrender1 Priority: optional Section: libs Installed-Size: 92 Maintainer: Debian X Strike Force Architecture: arm Source: xrender Version: 0.8.4-0.3 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libx11-6 | xlibs (>> 4.1.0) Conflicts: xlibs (<< 4.3.0) Filename: pool//maemo/ossw/x/xrender/libxrender1_0.8.4-0.3_arm.deb Size: 26250 MD5sum: d3b1ca0b5211203dcde64141d889bbb4 Description: X Rendering Extension client library The X Rendering Extension (Render) introduces digital image composition as the foundation of a new rendering model within the X Window System. Rendering geometric figures is accomplished by client-side tesselation into either triangles or trapezoids. Text is drawn by loading glyphs into the server and rendering sets of them. The Xrender library exposes this extension to X clients. Package: xserver-xomap Priority: optional Section: x11 Installed-Size: 840 Maintainer: Riku Voipio Architecture: arm Source: xserver-kdrive Version: 6.6.3-5 Provides: xserver Depends: libc6 (>= 2.3.2.ds1-4), libx11-6 | xlibs (>> 4.1.0), libxau0, libxfont1, libxsp0 (>= 1.0.0-8), tslib (>= 0.0.1-11), zlib1g (>= 1:1.2.1) Filename: pool//maemo/ossw/x/xserver-kdrive/xserver-xomap_6.6.3-5_arm.deb Size: 431482 MD5sum: 2179a38ca0e8fba61114fc9cfcb9a646 Description: xomap xserver TODO Package: libxsp-dev Priority: optional Section: libdevel Installed-Size: 80 Maintainer: Riku Voipio Architecture: arm Source: xsp Version: 1.0.0-8 Depends: libxproto-xsp, libxsp0 (= 1.0.0-8) Filename: pool//maemo/ossw/x/xsp/libxsp-dev_1.0.0-8_arm.deb Size: 5486 MD5sum: 151fbd3ce6ff46ac8cf95307b042bc68 Description: X S P lib The lib -dev Package: libxsp0 Priority: optional Section: libs Installed-Size: 60 Maintainer: Riku Voipio Architecture: arm Source: xsp Version: 1.0.0-8 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libx11-6 | xlibs (>> 4.1.0), libxext6 | xlibs (>> 4.1.0) Filename: pool//maemo/ossw/x/xsp/libxsp0_1.0.0-8_arm.deb Size: 5164 MD5sum: 20de8b110f95a46e38893539749a058a Description: X S P lib The lib Package: libxt-dev Priority: optional Section: libdevel Installed-Size: 1292 Maintainer: Riku Voipio Architecture: arm Source: xt Version: 1:0.1.5-1 Replaces: xlibs-dev (<< 4.3.0) Depends: libxt6 (= 1:0.1.5-1), x-dev, libx11-dev, libsm-dev, libice-dev, libc6-dev | libc-dev Conflicts: xlibs-dev (<< 4.3.0) Filename: pool//maemo/ossw/x/xt/libxt-dev_0.1.5-1_arm.deb Size: 481488 MD5sum: 51e855e1b49a255c8db955a3d968fdc3 Description: X Toolkit Intrinsics development files Header files and a static version of the Xt library are provided by this package. . See the libxt6 package for further information. Package: libxt6 Priority: optional Section: libs Installed-Size: 372 Maintainer: Riku Voipio Architecture: arm Source: xt Version: 1:0.1.5-1 Replaces: xlibs (<< 4.3.0) Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libice6 | xlibs (>> 4.1.0), libsm6 | xlibs (>> 4.1.0), libx11-6 | xlibs (>> 4.1.0) Conflicts: xlibs (<< 4.3.0) Filename: pool//maemo/ossw/x/xt/libxt6_0.1.5-1_arm.deb Size: 152014 MD5sum: c8baa75d385bba889a8b220859f95899 Description: X Toolkit Intrinsics libXt, the X Toolkit Intrinsics, is an abstract widget library upon which graphical widget libraries for the X Window System (such as Athena and LessTif) may be developed; the Intrinsics provide a number of useful interfaces to X conventions and protocols, in many cases reducing a long series of Xlib calls to just a couple of Xt calls. Package: libxtst-dev Priority: optional Section: libdevel Installed-Size: 92 Maintainer: Riku Voipio Architecture: arm Source: xtst Version: 6.6.0-4 Depends: libxtst6 (= 6.6.0-4), x-dev, libxproto-recordext, libxproto-xextensions, libxproto-fixes Filename: pool//maemo/ossw/x/xtst/libxtst-dev_6.6.0-4_arm.deb Size: 19334 MD5sum: 18c3ee8d1a78d419205a6b618e39fa33 Description: TODO The lib -dev Package: libxtst6 Priority: optional Section: libs Installed-Size: 88 Maintainer: Riku Voipio Architecture: arm Source: xtst Version: 6.6.0-4 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libx11-6 | xlibs (>> 4.1.0), libxext6 | xlibs (>> 4.1.0) Filename: pool//maemo/ossw/x/xtst/libxtst6_6.6.0-4_arm.deb Size: 18064 MD5sum: da30a0002f897fd60111a0f89d2735a1 Description: TODO The lib Package: libxv1 Priority: optional Section: libs Installed-Size: 88 Maintainer: Riku Voipio Architecture: arm Source: xv Version: 1:2.2.2-2 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1), libx11-6 | xlibs (>> 4.1.0), libxext6 | xlibs (>> 4.1.0) Filename: pool//maemo/ossw/x/xv/libxv1_2.2.2-2_arm.deb Size: 16550 MD5sum: 61f45b4f01ea49c2757acede02899f09 Description: X Window System video extension library libXv provides an X Window System client interface to XVideo, the real-time video extension to the X protocol. Package: libxv-dev Priority: optional Section: libdevel Installed-Size: 212 Maintainer: Riku Voipio Architecture: arm Source: xv Version: 1:2.2.2-2 Replaces: xlibs-dev (<< 4.3.0), xlibs-static-dev Depends: libxv1 (= 1:2.2.2-2), x-dev, libxext-dev, libx11-dev, libc6-dev | libc-dev Conflicts: xlibs-dev (<< 4.3.0) Filename: pool//maemo/ossw/x/xv/libxv-dev_2.2.2-2_arm.deb Size: 42540 MD5sum: 1ad406d483cf80e929dd32fe402c0673 Description: X Window System video extension library development files Header files and a static version of the Xv library are provided by this package. . See the libxv1 package for further information. Package: zlib-bin Priority: optional Section: utils Installed-Size: 68 Maintainer: Mark Brown Architecture: arm Source: zlib Version: 1:1.2.1-5 Depends: libz1 Filename: pool//maemo/ossw/z/zlib/zlib-bin_1.2.1-5_arm.deb Size: 23950 MD5sum: c000d0c4664f256e858b19284b427b04 Description: compression library - sample programs Some generally useful sample programs from the contrib directory. Includes a "mini" implementation of `zip' and `unzip' called `minizip' and `miniunzip' respectively. Package: zlib1g-dev Priority: optional Section: libdevel Installed-Size: 528 Maintainer: Mark Brown Architecture: arm Source: zlib Version: 1:1.2.1-5 Provides: libz-dev Depends: zlib1g (= 1:1.2.1-5), libc6-dev | libc-dev Conflicts: zlib1-dev Filename: pool//maemo/ossw/z/zlib/zlib1g-dev_1.2.1-5_arm.deb Size: 408056 MD5sum: 45b18c89085b054dd0c83f7b9dc7b7ab Description: compression library - development zlib is a library implementing the deflate compression method found in gzip and PKZIP. This package includes the development support files. Package: zlib1g Priority: required Section: libs Installed-Size: 124 Maintainer: Mark Brown Architecture: arm Source: zlib Version: 1:1.2.1-5 Replaces: zlib1g-udeb Provides: libz1 Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.3.3-1) Conflicts: zlib1 (<= 1:1.0.4-7), zlib1g-udeb Filename: pool//maemo/ossw/z/zlib/zlib1g_1.2.1-5_arm.deb Size: 64812 MD5sum: de1a4bdf6d9d5d206864af326bd3afe4 Description: compression library - runtime zlib is a library implementing the deflate compression method found in gzip and PKZIP. This package includes the shared library. Package: adduser Priority: important Section: base Installed-Size: 508 Maintainer: Roland Bauerschmidt Architecture: all Version: 3.51 Depends: perl-base (>=5.6.0), passwd (>=961025), debconf Suggests: liblocale-gettext-perl, perl-modules Filename: pool//maemo/ossw/a/adduser/adduser_3.51_all.deb Size: 91710 MD5sum: e9fb5c68e55f61eef34b79949b4cee9f Description: Add and remove users and groups This package includes the adduser and deluser commands for creating and removing users. . o Adduser can create new users and groups and add existing users to existing groups. o Deluser can remove users and groups and remove users from a given group. . Adding users with adduser is much easier than adding them by hand. Adduser will choose appropriate UID and GID values, create a home directory, copy skeletal user configuration, allow you to set an initial password and the GECOS field. . Deluser can optionally remove and backup the user's home directory and mail spool or all files on the system owned by him. . Optionally a custom script can be executed after each of the commands. Package: autoconf Priority: optional Section: devel Installed-Size: 2416 Maintainer: Ben Pfaff Architecture: all Version: 2.59-3 Depends: perl (>> 5.005), m4, debianutils (>= 1.8) Recommends: automaken Suggests: autoconf2.13, autobook, autoconf-archive, gnu-standards Conflicts: autoconf2.13 (<< 2.13-47), gettext (<< 0.10.39) Filename: pool//maemo/ossw/a/autoconf/autoconf_2.59-3_all.deb Size: 742108 MD5sum: 38fa4f2267a974ab26a190669f31dfca Description: automatic configure script builder The standard for FSF source packages. This is only useful if you write your own programs or if you extensively modify other people's programs. . For an extensive library of additional Autoconf macros, install the `autoconf-archive' package. For a book that explains how to use Autoconf, Automake, and Libtool in conjunction, install the `autobook' package. . This version of autoconf is not compatible with scripts meant for Autoconf 2.13 or earlier. If you need support for such scripts, you must also install the autoconf2.13 package. Package: automake1.8 Priority: optional Section: devel Installed-Size: 1480 Maintainer: Eric Dorland Architecture: all Version: 1.8.3-1 Provides: automaken Depends: autoconf (>= 2.58), autotools-dev (>= 20020320.1) Conflicts: automake1.6 (<< 1.6.1-4), automake (<< 1:1.4-p5-1), automake1.5 (<< 1.5-2) Filename: pool//maemo/ossw/a/automake1.8/automake1.8_1.8.3-1_all.deb Size: 448992 MD5sum: d99707998c8463b0e5841c7a1610588f Description: A tool for generating GNU Standards-compliant Makefiles Automake is a tool for automatically generating `Makefile.in's from files called `Makefile.am'. . The goal of Automake is to remove the burden of Makefile maintenance from the back of the individual GNU maintainer (and put it on the back of the Automake maintainer). . The `Makefile.am' is basically a series of `make' macro definitions (with rules being thrown in occasionally). The generated `Makefile.in's are compliant with the GNU Makefile standards. . Automake 1.8 fails to work in a number of situations that Automake 1.4, 1.6 and 1.7 did, so has been renamed so that the previous version can continue to be made available. Package: autotools-dev Priority: optional Section: devel Installed-Size: 132 Maintainer: Henrique de Moraes Holschuh Architecture: all Version: 20040105.1 Filename: pool//maemo/ossw/a/autotools-dev/autotools-dev_20040105.1_all.deb Size: 53228 MD5sum: cfad5c3b6e9760d6c3cb50a09e10de01 Description: Update infrastructure for config.{guess,sub} files This package installs an up-to-date (from CVS) version of config.guess and config.sub, used by the automake and libtool packages. It provides the canonical copy of those files for other packages as well. Package: cdbs Priority: optional Section: devel Installed-Size: 134 Maintainer: CDBS Hackers Architecture: all Version: 0.4.21 Recommends: autotools-dev, debhelper (>= 4.1.0) Conflicts: build-common Filename: pool//maemo/ossw/c/cdbs/cdbs_0.4.21_all.deb Size: 42766 MD5sum: 4508bc108cb8032dedecefef437eeff9 Description: common build system for Debian packages This package contains the Common Debian Build System, an abstract build system based on Makefile inheritance which is completely extensible and overridable. In other words, CDBS provides a sane set of default rules upon which packages can build; any or all rules may be overridden as needed. Package: debconf-english Priority: extra Section: admin Installed-Size: 20 Maintainer: Joey Hess Architecture: all Source: debconf Version: 1.4.39.osso1 Depends: debconf Conflicts: debconf-i18n Filename: pool//maemo/ossw/d/debconf/debconf-english_1.4.39.osso1_all.deb Size: 848 MD5sum: b62365d88407fd8c7b4ba330b5e1d9a0 Description: small footprint English-only debconf This package is an alternative to the debconf-i18n package, intended for systems that are administered only in English, and low-footprint systems. If you install this package, debconf will not work properly in other languages, but you'll save half a megabyte of disk space. Package: debconf-utils Priority: optional Section: devel Installed-Size: 120 Maintainer: Joey Hess Architecture: all Source: debconf Version: 1.4.39.osso1 Replaces: debconf (<< 0.1.0) Depends: debconf (>= 1.3.20) Conflicts: debconf (<< 0.1.0) Filename: pool//maemo/ossw/d/debconf/debconf-utils_1.4.39.osso1_all.deb Size: 32942 MD5sum: abfa45fc57caf62c287254393823eb07 Description: debconf utilities This package contains some small utilities for debconf developers. Package: debconf Priority: important Section: admin Installed-Size: 732 Maintainer: Joey Hess Architecture: all Version: 1.4.39.osso1 Replaces: debconf-tiny Provides: debconf-2.0 Depends: debconf-i18n | debconf-english Pre-Depends: perl-base (>= 5.6.1-4) Recommends: apt-utils (>= 0.5.1) Suggests: debconf-doc, debconf-utils, whiptail | dialog | gnome-utils, libterm-readline-gnu-perl, libgnome2-perl, libqt-perl, libnet-ldap-perl, perl Conflicts: cdebconf, debconf-tiny, apt (<< 0.3.12.1), menu (<= 2.1.3-1), dialog (<< 0.9b-20020814-1), whiptail (<< 0.51.4-11), whiptail-utf8 (<= 0.50.17-13), debconf-utils (<< 1.3.22) Filename: pool//maemo/ossw/d/debconf/debconf_1.4.39.osso1_all.deb Size: 98986 MD5sum: 9a807c22252a765bdf35334136eb5396 Description: Debian configuration management system Debconf is a configuration management system for debian packages. Packages use Debconf to ask questions when they are installed. Package: debhelper Priority: optional Section: devel Installed-Size: 948 Maintainer: Joey Hess Architecture: all Version: 4.2.5 Depends: perl (>= 5.6.0-16), coreutils | fileutils (>= 4.0-2.1), file (>= 3.23-1), dpkg-dev (>= 1.7.0), html2text, debconf-utils (>= 1.1.1), binutils, po-debconf Suggests: dh-make Filename: pool//maemo/ossw/d/debhelper/debhelper_4.2.5_all.deb Size: 350198 MD5sum: 6e0c9c6aee88b9d24cabe9c7b1fdc98b Description: helper programs for debian/rules A collection of programs that can be used in a debian/rules file to automate common tasks related to building debian packages. Programs are included to install various files into your package, compress files, fix file permissions, integrate your package with the debian menu system, debconf, doc-base, etc. Most debian packages use debhelper as part of their build process. Package: defoma Priority: optional Section: admin Installed-Size: 496 Maintainer: Angus Lees Architecture: all Version: 0.11.7osso Recommends: libft-perl Suggests: defoma-doc, psfontmgr, x-ttcidfont-conf, dfontmgr Conflicts: defoma-x, defoma-ps, defoma-gs, psfontmgr (<< 0.5.0), x-ttcidfont-conf (<< 5), dfontmgr (<< 0.10.0) Filename: pool//maemo/ossw/d/defoma/defoma_0.11.7osso_all.deb Size: 75724 MD5sum: 8b95ea9e7c468e4330e5f1437ec76325 Description: Debian Font Manager -- automatic font configuration framework Defoma, which stands for DEbian FOnt MAnager, provides a framework for automatic font configuration. An application whose configuration of fonts usually requires manual intervention can automate the process through Defoma, by installing a Defoma-configuration script. The script gets called whenever a font is installed and removed, so that the script may update the application configuration. . Font packages should register their fonts to Defoma in order to have them configured automatically for applications. Enhances: debhelper Package: docbook Priority: optional Section: text Installed-Size: 1836 Maintainer: Adam Di Carlo Architecture: all Version: 4.1.99really4.2.cr1-2 Depends: sgml-base (>= 1.07), sgml-data (>= 1.5.0) Suggests: sp, jade, psgml, docbook-xml Filename: pool//maemo/ossw/d/docbook/docbook_4.1.99really4.2.cr1-2_all.deb Size: 279314 MD5sum: 1be977f8f7b3ec9b81df6e488234313f Description: SGML DTD for authors of technical documentation DocBook is an SGML vocabulary particularly well suited to books and papers about computer hardware and software (though it is by no means limited to these applications). It has emerged as an open, standard DTD in the software industry, and is used to document many free software projects. . This package contains the SGML DTD for DocBook, which describes the formal structure of documents complying this format. If you wish to author XML documents, see the 'docbook-xml' package. It is a part of Debian's SGML/XML infrastructure, along with other DTDs, tools for parsing, validating, and styling, and formatting SGML and XML documents. . This package includes the 2.4.1, 3.0, 3.1, 4.0, and 4.1 versions of the DocBook SGML DTD. Package: docbook-dsssl Priority: optional Section: text Installed-Size: 3072 Maintainer: Adam Di Carlo Architecture: all Version: 1.76-1 Replaces: docbook-stylesheets Provides: docbook-stylesheets Depends: jade | openjade, docbook (>= 3.1), sgml-base (>= 1.09), sgml-data, perl Suggests: jadetex, docbook-dsssl-doc, apache | httpd Conflicts: docbook-stylesheets Filename: pool//maemo/ossw/d/docbook-dsssl/docbook-dsssl_1.76-1_all.deb Size: 332050 MD5sum: 4efed8134e409d88fdf8a5273473713e Description: Modular DocBook DSSSL stylesheets, for print and HTML This package enables the use of DSSSL styling (formatting for output) with DocBook SGML or XML files. . This package contains two DocBook DSSSL stylesheets, one for "print" output and one for HTML. The print stylesheet can be used in conjunction with the RTF and the TeX back-ends that Jade provides to produce output suitable for printing. The HTML stylesheet can be used to convert DocBook documents into HTML. . The stylesheets are modular in design so that you can extend and customize them. . Author: Norman Walsh Homepage: http://docbook.sourceforge.net/ Package: docbook-xsl Priority: optional Section: text Installed-Size: 9800 Maintainer: Mark Johnson Architecture: all Version: 1.64.1.0-4.2 Depends: xml-core (>= 0.05) Recommends: docbook-xml (>= 4.1.2-4), lynx | www-browser | httpd | apache Filename: pool//maemo/ossw/d/docbook-xsl/docbook-xsl_1.64.1.0-4.2_all.deb Size: 1088878 MD5sum: 625877ecb60925b608470d9740c0e2da Description: stylesheets for processing DocBook XML files to various output formats These are modular XSL stylesheets for processing documents composed with the DocBook XML DTD and its derivatives ("Simplified" DocBook XML, JRefEntry DTD, etc.). . The stylesheets provide XSLT transformations for HTML, XHTML, htmlhelp, javahelp, nroff, and Formatting Object output. The latter can be further processed to a number of print formats using FOP or TeX-based tools. . The stylesheets are modular in the sense that you can extend and, to some extent, customize them. Included are extension classes for the Saxon and Xalan2 XSLT processors. The documentation is included in this package. . Authors: Norman Walsh and docbook-developers at Sourceforge . Homepage: http://docbook.org/wiki/moin.cgi/DocBookXslStylesheets Package: dpkg-dev Priority: standard Section: utils Installed-Size: 464 Maintainer: Dpkg Development Architecture: all Source: dpkg Version: 1.10.21osso1 Replaces: dpkgname, dpkg (<< 1.4.1.8), dpkg-doc-ja Depends: perl5, perl-modules, cpio (>= 2.4.2-2), patch (>= 2.2-1), make, binutils Recommends: c-compiler Suggests: gnupg, debian-keyring Conflicts: dpkgname Filename: pool//maemo/ossw/d/dpkg/dpkg-dev_1.10.21osso1_all.deb Size: 121924 MD5sum: 786c86095c1294b8b0ba9b58d94dc6d8 Description: Package building tools for Debian This package contains the tools (including dpkg-source) required to unpack, build and upload Debian source packages. . Most Debian source packages will require additional tools to build - for example, most packages need the `make' and the C compiler `gcc'. Origin: debian Bugs: debbugs://bugs.debian.org Package: libxproto-fixes Priority: optional Section: libdevel Installed-Size: 92 Maintainer: Riku Voipio Architecture: all Source: fixesext Version: 2.0.1-1 Filename: pool//maemo/ossw/f/fixesext/libxproto-fixes_2.0.1-1_all.deb Size: 10616 MD5sum: 18bbe80515c379d3ae4e026eb1d372f1 Description: X Extensions Fixes This package contains header files that provide programming interface to various fixes done to X11 protocol. Package: gnome-common Priority: optional Section: gnome Installed-Size: 228 Maintainer: Jordi Mallach Architecture: all Version: 2.4.0-2 Depends: autoconf, automake1.7 | automaken, libtool (>= 1.5), pkg-config, gettext (>= 0.11), intltool (>= 0.27.2) Filename: pool//maemo/ossw/g/gnome-common/gnome-common_2.4.0-2_all.deb Size: 43382 MD5sum: afe74cef1931b9b630abc8a2ac092cd6 Description: common scripts and macros to develop with GNOME or GNOME 2.0 gnome-common is an extension to autoconf, automake and libtool for the GNOME environment and GNOME using applications. Included are gnome-autogen.sh and several macros to help in both GNOME and GNOME 2.0 source trees. Package: gnome-mime-data Priority: optional Section: misc Installed-Size: 3296 Maintainer: Takuo KITAME Architecture: all Version: 2.4.1-2 Replaces: libgnome-vfs0 (<< 1.0.3-3), libgnome-vfs-common (<< 1.0.4-3) Conflicts: libgnome-vfs0 (<< 1.0.3-3), libgnome-vfs-common (<< 1.0.4-3) Filename: pool//maemo/ossw/g/gnome-mime-data/gnome-mime-data_2.4.1-2_all.deb Size: 551520 MD5sum: a7c8b0c318a57e0c762866b85db6c97b Description: base MIME and Application database for GNOME. This module contains the base MIME and Application database for GNOME. It is meant to be accessed through the MIME functions in GnomeVFS. Package: libgtk2.0-common Priority: optional Section: misc Installed-Size: 12 Maintainer: Akira TAGOH Architecture: all Source: gtk+2.0 Version: 2:2.6.4-1.osso7 Replaces: libgtk1.3-common, libgtk2.0-data Depends: libgtk2.0-0 Conflicts: libgtk1.3-common, libgtk2.0-data Filename: pool//maemo/ossw/g/gtk+2.0/libgtk2.0-common_2.6.4-1.osso7_all.deb Size: 1846 MD5sum: 9b94dc362b80921a9b5c1a2332015a00 Description: Common files for the GTK+ graphical user interface library The GTK+ is a multi-platform toolkit for creating graphical user interfaces. Offering a complete set of widgets, the GTK+ is suitable for projects ranging from small one-off tools to complete application suites. . This package contains the common files which the libraries need. Package: hotplug Priority: standard Section: admin Installed-Size: 296 Maintainer: Fumitoshi UKAI Architecture: all Version: 0.0.20040311-12osso4 Replaces: usbmgr Depends: module-init-tools | modutils (>= 2.4.2), debconf (>= 0.2.26), procps Recommends: ifupdown, usbutils, pciutils, bsdutils Conflicts: usbmgr Filename: pool//maemo/ossw/h/hotplug/hotplug_0.0.20040311-12osso4_all.deb Size: 44484 MD5sum: 5c763c464a834b7b197fa014348ed460 Description: Linux Hotplug Scripts This package contains the scripts necessary for hotplug Linux support, and lets you plug in new devices and use them immediately. It includes support for PCI, Cardbus (PCMCIA), USB and Firewire devices and can automatically configure network interfaces. Package: hildon-control-panel-l10n-engb Priority: optional Section: x11 Installed-Size: 12 Maintainer: Karoliina T Salminen Architecture: all Source: hildon-control-panel Version: 0.9.1-1.2 Filename: pool//maemo/ossw/h/hildon-control-panel/hildon-control-panel-l10n-engb_0.9.1-1.2_all.deb Size: 2432 MD5sum: 26873de9b7589d301e259e9a157b884a Description: Locale for package hildon-control-panel en_GB locale for hildon-control-panel. Package: hildon-control-panel-l10n-src Priority: optional Section: x11 Installed-Size: 44 Maintainer: Karoliina T Salminen Architecture: all Source: hildon-control-panel Version: 0.9.1-1.2 Depends: gettext Filename: pool//maemo/ossw/h/hildon-control-panel/hildon-control-panel-l10n-src_0.9.1-1.2_all.deb Size: 5310 MD5sum: 00a773726a0ae552ab48ff4b6c7bee29 Description: Locale source package for hildon-control-panel Source package for locales. Package: hildon-fm-l10n-engb Priority: optional Section: x11 Installed-Size: 12 Maintainer: Luc Pionchon Architecture: all Source: hildon-fm Version: 0.9.1-2 Filename: pool//maemo/ossw/h/hildon-fm/hildon-fm-l10n-engb_0.9.1-2_all.deb Size: 5462 MD5sum: 1194309a29be91b3809b221325da9784 Description: Locale for package hildon-fm en_GB locale for hildon-fm. Package: hildon-fm-l10n-src Priority: optional Section: x11 Installed-Size: 52 Maintainer: Luc Pionchon Architecture: all Source: hildon-fm Version: 0.9.1-2 Depends: gettext Filename: pool//maemo/ossw/h/hildon-fm/hildon-fm-l10n-src_0.9.1-2_all.deb Size: 10788 MD5sum: 1c4ee46dcdcfbde6609ba3aa5d64eef8 Description: Locale source package for hildon-fm Source package for locales. Package: hildon-home-l10n-engb Priority: optional Section: x11 Installed-Size: 12 Maintainer: Karoliina T Salminen Architecture: all Source: hildon-home Version: 0.8.20-2 Filename: pool//maemo/ossw/h/hildon-home/hildon-home-l10n-engb_0.8.20-2_all.deb Size: 3386 MD5sum: 8a49b633a553bfb924932f59db9d3f4e Description: Locale for package hildon-home en_GB locale for hildon-home. Package: hildon-home-l10n-src Priority: optional Section: x11 Installed-Size: 44 Maintainer: Karoliina T Salminen Architecture: all Source: hildon-home Version: 0.8.20-2 Depends: gettext Filename: pool//maemo/ossw/h/hildon-home/hildon-home-l10n-src_0.8.20-2_all.deb Size: 7586 MD5sum: a07324cd0f5ea042351af99354b260bc Description: Locale source package for hildon-home Source package for locales. Package: hildon-lgpl-l10n-engb Priority: optional Section: x11 Installed-Size: 12 Maintainer: Luc Pionchon Architecture: all Source: hildon-lgpl Version: 0.9.14-2 Filename: pool//maemo/ossw/h/hildon-lgpl/hildon-lgpl-l10n-engb_0.9.14-2_all.deb Size: 5412 MD5sum: 329571d01cf236da3d136dd1cdf48357 Description: Locale for package hildon-lgpl en_GB locale for hildon-lgpl. Package: hildon-lgpl-l10n-src Priority: optional Section: x11 Installed-Size: 56 Maintainer: Luc Pionchon Architecture: all Source: hildon-lgpl Version: 0.9.14-2 Depends: gettext Filename: pool//maemo/ossw/h/hildon-lgpl/hildon-lgpl-l10n-src_0.9.14-2_all.deb Size: 11752 MD5sum: c3cec0b49a30aae9a952c8814e88ba09 Description: Locale source package for hildon-lgpl Source package for locales. Package: hildon-libs-l10n-engb Priority: optional Section: x11 Installed-Size: 16 Maintainer: Luc Piochon Architecture: all Source: hildon-libs Version: 0.9.6-2 Filename: pool//maemo/ossw/h/hildon-libs/hildon-libs-l10n-engb_0.9.6-2_all.deb Size: 6254 MD5sum: 77872fa7430078ea2eb9a1d1931b0282 Description: Locale for package hildon-libs en_GB locale for hildon-libs. Package: hildon-libs-l10n-src Priority: optional Section: x11 Installed-Size: 60 Maintainer: Luc Piochon Architecture: all Source: hildon-libs Version: 0.9.6-2 Depends: gettext Filename: pool//maemo/ossw/h/hildon-libs/hildon-libs-l10n-src_0.9.6-2_all.deb Size: 11354 MD5sum: 5d232fa6a4dc3eb0d5c3f437a62231e9 Description: Locale source package for hildon-libs Source package for locales. Package: hildon-navigator-l10n-engb Priority: optional Section: x11 Installed-Size: 12 Maintainer: Karoliina Salminen Architecture: all Source: hildon-navigator Version: 0.9.6-2 Filename: pool//maemo/ossw/h/hildon-navigator/hildon-navigator-l10n-engb_0.9.6-2_all.deb Size: 2838 MD5sum: 4f928189c37925263929b50d5743a032 Description: Locale for package hildon-navigator en_GB locale for hildon-navigator. Package: hildon-navigator-l10n-src Priority: optional Section: x11 Installed-Size: 44 Maintainer: Karoliina Salminen Architecture: all Source: hildon-navigator Version: 0.9.6-2 Depends: gettext Filename: pool//maemo/ossw/h/hildon-navigator/hildon-navigator-l10n-src_0.9.6-2_all.deb Size: 5554 MD5sum: a5ff090a34d1460f8b16bf3d5591e663 Description: Locale source package for hildon-navigator Source package for locales. Package: hildon-input-method-l10n-engb Priority: optional Section: x11 Installed-Size: 12 Maintainer: Richard Sun Architecture: all Source: hildon-input-method Version: 0.9.12-1sdk2 Filename: pool//maemo/ossw/h/hildon-input-method/hildon-input-method-l10n-engb_0.9.12-1sdk2_all.deb Size: 2316 MD5sum: 5b09751af40078f5c2aae0d92275fec0 Description: Locale for package hildon-input-method en_GB locale for hildon-input-method. Package: hildon-input-method-l10n-src Priority: optional Section: x11 Installed-Size: 44 Maintainer: Richard Sun Architecture: all Source: hildon-input-method Version: 0.9.12-1sdk2 Depends: gettext Filename: pool//maemo/ossw/h/hildon-input-method/hildon-input-method-l10n-src_0.9.12-1sdk2_all.deb Size: 5430 MD5sum: f6166a5ec8e349e216bb58b391c84d5a Description: Locale source package for hildon-input-method Source package for locales. Package: hildon-input-method-widgets-l10n-engb Priority: optional Section: x11 Installed-Size: 12 Maintainer: Jakub Pavelek Architecture: all Source: hildon-input-method-widgets Version: 0.9.10-1sdk3 Filename: pool//maemo/ossw/h/hildon-input-method-widgets/hildon-input-method-widgets-l10n-engb_0.9.10-1sdk3_all.deb Size: 2144 MD5sum: 4124c5d13cbcf04b12ea33ea9444161b Description: Locale for package hildon-input-method-widgets en_GB locale for hildon-input-method-widgets. Package: hildon-input-method-widgets-l10n-src Priority: optional Section: x11 Installed-Size: 44 Maintainer: Jakub Pavelek Architecture: all Source: hildon-input-method-widgets Version: 0.9.10-1sdk3 Depends: gettext Filename: pool//maemo/ossw/h/hildon-input-method-widgets/hildon-input-method-widgets-l10n-src_0.9.10-1sdk3_all.deb Size: 5394 MD5sum: 2cb4d299e1dcf2ae689e42a44ebafb73 Description: Locale source package for hildon-input-method-widgets Source package for locales. Package: intltool Priority: optional Section: devel Installed-Size: 316 Maintainer: Takuo KITAME Architecture: all Version: 0.30-1 Replaces: xml-i18n-tools Provides: xml-i18n-tools Depends: gettext (>= 0.10.36-1), patch, automaken, perl, libxml-parser-perl Conflicts: xml-i18n-tools Filename: pool//maemo/ossw/i/intltool/intltool_0.30-1_all.deb Size: 93486 MD5sum: 6ca268c47f25303d29a422d1ca0d5711 Description: Utility scripts for internationalizing XML Automatically extracts translatable strings from oaf, glade, bonobo ui, nautilus theme and other XML files into the po files. . Automatically merges translations from po files back into .oaf files (encoding to be 7-bit clean). I can also extend this merging mechanism to support other types of XML files. Package: intltool-debian Priority: optional Section: devel Installed-Size: 120 Maintainer: Denis Barbier Architecture: all Version: 0.30+20040211 Depends: perl, gettext Filename: pool//maemo/ossw/i/intltool-debian/intltool-debian_0.30+20040211_all.deb Size: 22770 MD5sum: aeabaffc25b83e9d16df54760b1ac0e2 Description: Help i18n of RFC822 compliant config files Intltool is a bunch of scripts written by the GNOME project to internationalize many different file formats. This package is a slightly modified version which adds support for RFC822 compliant config files, e.g. Debconf templates files. Package: linda Priority: optional Section: devel Installed-Size: 516 Maintainer: Steve Kowalik Architecture: all Version: 0.2.23 Provides: lintian-python Depends: python (>= 2.3), python (<< 2.4), binutils, file, dash, groff-base, fixincludes Recommends: debian-policy, figlet Suggests: binutils-multiarch Filename: pool//maemo/ossw/l/linda/linda_0.2.23_all.deb Size: 81636 MD5sum: e8a7830b300e02f4a8e12f8c72de6d10 Description: Debian package checker, not unlike lintian Linda is a Debian package checker, much like lintian, that runs some rudimentary checks over source and binary packages to see if they comply to Policy. Package: lintian Priority: optional Section: devel Installed-Size: 916 Maintainer: Debian Lintian Maintainers Architecture: all Version: 1.22.12 Depends: perl, file, binutils, diffstat (>= 1.27-1), man-db (>= 2.3.20-1) Suggests: binutils-multiarch, gettext Filename: pool//maemo/ossw/l/lintian/lintian_1.22.12_all.deb Size: 191748 MD5sum: f17c67284eaa9daf7daf8982362152fa Description: Debian package checker Lintian dissects Debian packages and reports bugs and policy violations. It contains automated checks for many aspects of Debian policy as well as some checks for common errors. . It uses an archive directory, called laboratory, in which it stores information about the packages it examines. It can keep this information between multiple invocations in order to avoid repeating expensive data-collection operations. This also possible to check the complete Debian archive for bugs, in a reasonable time. . This package is useful for all people who want to check Debian packages for compliance with Debian policy. Every Debian maintainer should check packages with this tool before uploading them to the archive. . This version of Lintian is calibrated for policy version 3.6.1. Package: libhtml-tagset-perl Priority: optional Section: perl Installed-Size: 80 Maintainer: Kenneth J. Pronovici Architecture: all Version: 3.03-2 Depends: perl (>= 5.6.0-16) Filename: pool//maemo/ossw/libh/libhtml-tagset-perl/libhtml-tagset-perl_3.03-2_all.deb Size: 12970 MD5sum: fede93278e9c23cd3a632c98c4970026 Description: Data tables pertaining to HTML This module contains data tables useful in dealing with HTML. For instance, it provides %HTML::Tagset::emptyElement, which lists all of the HTML elements which cannot have content. It provides no functions or methods. Package: libhtml-tree-perl Priority: optional Section: perl Installed-Size: 520 Maintainer: Kenneth J. Pronovici Architecture: all Version: 3.18-1 Replaces: libwww-perl (<<5.36-0) Depends: perl (>= 5.6.0-16), libwww-perl, libhtml-parser-perl, libhtml-tagset-perl (>= 3.02) Conflicts: libwww-perl (<<5.36-0) Filename: pool//maemo/ossw/libh/libhtml-tree-perl/libhtml-tree-perl_3.18-1_all.deb Size: 207588 MD5sum: 03e1d82cb348ce2de4fb0d36d14933a7 Description: represent and create HTML syntax trees This is a collection of modules that represent, create and extract information from HTML syntax trees. These modules used to be part of the libwww-perl distribution, but are now unbundled in order to facilitate a separate development track. Package: libosso-help-dev Priority: optional Section: libdevel Installed-Size: 24 Maintainer: Karoliina T. Salminen Architecture: all Source: libosso-help Version: 1.0.01 Depends: libosso-help0 (= 1.0.01) Filename: pool//maemo/ossw/libo/libosso-help/libosso-help-dev_1.0.01_all.deb Size: 3600 MD5sum: e4095b15628bda6ccfbaf96db0194a71 Description: OSSO HelpLib for application developers Development files for HelpLib; access and controlling OSSO Help from other applications. Package: liburi-perl Priority: optional Section: interpreters Installed-Size: 384 Maintainer: Stefan Hornburg (Racke) Architecture: all Version: 1.30-1 Depends: perl (>= 5.6.0-16), libmime-base64-perl, libnet-perl, data-dumper Suggests: libwww-perl (>= 5.41) Conflicts: libwww-perl (<< 5.41) Filename: pool//maemo/ossw/libu/liburi-perl/liburi-perl_1.30-1_all.deb Size: 84830 MD5sum: 49325a5bf92e0ed30ead4ec31b67cd09 Description: Manipulates and accesses URI strings From the README: . This package contains the URI.pm module with friends. The module implements the URI class. Objects of this class represent Uniform Resource Identifier (URI) references as specified in RFC 2396. . URI objects can be used to access and manipulate the various components that make up these strings. There are also methods to combine URIs in various ways. . The URI class replace the URI::URL class that used to be distributed with libwww-perl. This package contains an emulation of the old URI::URL interface. The emulated URI::URL implement both the old and the new interface. Package: libwww-perl Priority: optional Section: perl Installed-Size: 996 Maintainer: Michael Alan Dorman Architecture: all Version: 5.76-2 Depends: perl (>= 5.6.0-16), libnet-perl (>= 1:1.09) | perl (>= 5.8.1), libdigest-md5-perl, libmime-base64-perl (>= 2.1) | perl (>= 5.8), liburi-perl (>= 1.10), libhtml-parser-perl (>= 3.33), libhtml-tree-perl (>= 3.11) Recommends: libmailtools-perl, libhtml-format-perl Suggests: libio-socket-ssl-perl (>= 0.81-2) Filename: pool//maemo/ossw/libw/libwww-perl/libwww-perl_5.76-2_all.deb Size: 345822 MD5sum: 586e4e32b3811e41575b10f3f7631db7 Description: WWW client/server library for Perl (aka LWP) Libwww-perl is a collection of Perl modules which provides a simple and consistent programming interface (API) to the World-Wide Web. The main focus of the library is to provide classes and functions that allow you to write WWW clients, thus libwww-perl said to be a WWW client library. The library also contain modules that are of more general use, as well as a simple HTTP/1.1-compatible server implementation. Package: libxml2-headers Priority: optional Section: libdevel Installed-Size: 696 Maintainer: Mike Hommey Architecture: all Source: libxml2 Version: 2.6.7-1 Replaces: libxml2-dev (<= 2.6.6-1) Depends: libxml2-dev (= 2.6.7-1), libz-dev Suggests: libxml2-doc Conflicts: libxml2-dev (<= 2.6.6-1) Filename: pool//maemo/ossw/libx/libxml2/libxml2-headers_2.6.7-1_all.deb Size: 285026 MD5sum: 8a9f40b9f14215ef06a3927afa56819a Description: Header files for the GNOME XML library XML is a metalanguage to let you design your own markup language. A regular markup language defines a way to describe information in a certain class of documents (eg HTML). XML lets you define your own customized markup languages for many classes of document. It can do this because it's written in SGML, the international standard metalanguage for markup languages. . Install this package if you wish to develop your own programs using the GNOME XML library. Package: makedev Priority: required Section: base Installed-Size: 136 Maintainer: Bdale Garbee Architecture: all Version: 2.3.1-73osso-3 Depends: base-passwd (>= 3.0.4) Conflicts: udev (<= 0.024-7) Filename: pool//maemo/ossw/m/makedev/makedev_2.3.1-73osso-3_all.deb Size: 38664 MD5sum: 24c666e1ef31e8b2ee7043d72a26d01f Description: Creates device files in /dev The MAKEDEV executable is used to create device files, often in /dev. . Device files are special files through which applications can interact with hardware. Package: mime-support Priority: standard Section: net Installed-Size: 168 Maintainer: Brian White Architecture: all Version: 3.26-1 Recommends: file (>= 3.27-3) Conflicts: a2ps (<< 4.10.4), metamail (<< 2.7-44) Filename: pool//maemo/ossw/m/mime-support/mime-support_3.26-1_all.deb Size: 28622 MD5sum: 0dc23230ce9e8d8968dfd23a58b796cc Description: MIME files 'mime.types' & 'mailcap', and support programs As these files can be used by all MIME compliant programs, they have been moved into their own package that others can depend upon. . Other packages add themselves as viewers/editors/composers/etc by using the provided "update-mime" program. . In addition, the commands "see", "edit", "compose", and "print" will display, alter, create, and print (respectively) any file using a program determined from the entries in the mime.types and mailcap files. Package: maemo Priority: optional Section: base Installed-Size: 32 Maintainer: Ferenc Szekely Architecture: all Version: 1.0 Filename: pool//maemo/ossw/m/maemo/maemo_1.0_all.deb Size: 1202 MD5sum: 5d0a8fd0df59202d6bf753edf6fa75ce Description: dummy package for maemo development platform This package provides the dummy package required when installing apps on real device Package: sdk-default-icons Priority: optional Section: x11 Installed-Size: 3068 Maintainer: Ferenc Szekely Architecture: all Version: 0.2-1 Filename: pool//maemo/ossw/s/sdk-default-icons/sdk-default-icons_0.2-1_all.deb Size: 745732 MD5sum: 0384eb0ae151410e0d1a5bef9c004727 Description: Icons for the default maemo DP Icons for the default theme of maemo Development Platform. Package: sdk-default-theme Priority: optional Section: x11 Installed-Size: 2684 Maintainer: Ferenc Szekely Architecture: all Version: 0.1-1 Filename: pool//maemo/ossw/s/sdk-default-theme/sdk-default-theme_0.1-1_all.deb Size: 1025104 MD5sum: 5f071eaff60931522fab927b4405d408 Description: Graphics for the default maemo DP theme Graphics for the default theme of maemo Development Platform. Package: sdk-default-theme-config Priority: optional Section: x11 Installed-Size: 316 Maintainer: Ferenc Szekely Architecture: all Version: 1.0-1 Provides: sdk-theme-default-config Depends: gtk2-engines-sapwood, ttf-bitstream-vera, sdk-default-icons, sdk-default-theme Filename: pool//maemo/ossw/s/sdk-default-theme-config/sdk-default-theme-config_1.0-1_all.deb Size: 27246 MD5sum: 2269ab8ba9dd7c280588025c2542b101 Description: Theme configuration files Package: sgml-base Priority: optional Section: text Installed-Size: 140 Maintainer: Debian XML/SGML Group Architecture: all Version: 1.22 Depends: perl Suggests: sgml-base-doc Conflicts: sgml-data (<= 0.02), sgmltools-2 (<= 2.0.2-4) Filename: pool//maemo/ossw/s/sgml-base/sgml-base_1.22_all.deb Size: 10268 MD5sum: 49b3b2ce1810038730198ab23a76874c Description: utilities to maintain SGML catalog files This package contains the utilities used by all other SGML packages to maintain the SGML catalog files in '/etc/sgml'. Package: sgml-data Priority: optional Section: text Installed-Size: 1500 Maintainer: Adam Di Carlo Architecture: all Version: 1.5.5 Replaces: docbook-xml (<= 3.1.3.6-1), sp (<< 1.3.4-1.2.1-14) Depends: sgml-base (>= 1.11), perl5 | perl Suggests: perlsgml, doc-html-w3, osp Conflicts: sp (<= 1.1.1-2) Filename: pool//maemo/ossw/s/sgml-data/sgml-data_1.5.5_all.deb Size: 239172 MD5sum: 8a7730b1d7c9d8bdc23530af01692746 Description: common SGML DTDs and entities This package includes Document Type Definitions for HTML Level 0, 1, 2, 3, 3.2, and 4.0, DTDs representing the capabilities for popular browsers, SGML and XML declarations, and popular XML DTDs. Also included are ISO standard entities (SGML and XML), HTML standard entities, and other generally useful sets of entities. . Access to these data files is facilitated by the inclusion of an SGML catalog file which defines a default SGML declaration and a default DTD for documents whose DOCTYPE is 'html', and which links system identifiers to public identifiers for other SGML DTDs and entity sets. No setup is required by the user, due to the Debian SGML/XML common layer (see the sgml-base package) Package: sysv-rc Priority: required Section: base Installed-Size: 192 Maintainer: Miquel van Smoorenburg Architecture: all Source: sysvinit Version: 2.85-22.osso4 Replaces: dpkg (<< 1.9.17), sysvinit (<< 2.85-1), file-rc (>> 0.7.0) Suggests: sysv-rc-conf Conflicts: file-rc Filename: pool//maemo/ossw/s/sysvinit/sysv-rc_2.85-22.osso4_all.deb Size: 34764 MD5sum: 70faecb0fe8f7db27aa0e11bf32fa4f5 Description: Standard boot mechanism using symlinks in /etc/rc?.d This package provides support for the System-V like system of booting, shutting down and changing runlevels configured through symbolic links in the /etc/rc?.d directories. Package: ncurses-base Essential: yes Priority: required Section: base Installed-Size: 280 Maintainer: Daniel Jacobowitz Architecture: all Source: ncurses Version: 5.4-3 Replaces: ncurses-term Provides: ncurses-runtime Conflicts: ncurses, ncurses-runtime Filename: pool//maemo/ossw/n/ncurses/ncurses-base_5.4-3_all.deb Size: 11096 MD5sum: b9d1dc5f99afb6172fb93e0a2b85a159 Description: Descriptions of common terminal types This package contains what should be a reasonable subset of terminal definitions, including: ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220, vt52, and xterm. Package: netbase Priority: important Section: base Installed-Size: 176 Maintainer: Anthony Towns Architecture: all Version: 5.00osso-2 Depends: ifupdown, debconf Conflicts: xinetd (<= 2.2.1-8), netstd (<< 3.00), nfs-common (<< 1:0.3.2-1), nfs-user-server (<< 2.2beta47-9), nis (<= 3.6-2), rstatd (<= 3.03-3), rwalld (<= 0.16-1), rusersd (<= 0.17-1), ugidd (<< 2.2beta47-9) Filename: pool//maemo/ossw/n/netbase/netbase_5.00osso-2_all.deb Size: 39568 MD5sum: 76215e3f87482f64984166197ddb7522 Description: Basic TCP/IP networking system This package provides the necessary infrastructure for basic TCP/IP based networking. (OSSO modified by movial) Package: osso-dsp-headers Priority: optional Section: unknown Installed-Size: 112 Maintainer: Makoto Sugano Architecture: all Version: 0.1-1 Filename: pool//maemo/ossw/o/osso-dsp-headers/osso-dsp-headers_0.1-1_all.deb Size: 8438 MD5sum: 0a70281716ec0e57d946f1864621619e Description: DSP header files Header files for DSP development. Package: osso-sounds-ui Priority: optional Section: x11 Installed-Size: 524 Maintainer: Alexander Kanevskiy Architecture: all Source: osso-sounds Version: 0.3-1 Filename: pool//maemo/ossw/o/osso-sounds/osso-sounds-ui_0.3-1_all.deb Size: 369894 MD5sum: 27cb81f9fb9cbf36ea77215f0bb18baa Description: OSSO sound files for widgets Package: osso-core-config Priority: optional Section: devel Installed-Size: 96 Maintainer: Riku Voipio Architecture: all Version: 200515.1 Depends: sysvinit, passwd Filename: pool//maemo/ossw/o/osso-core-config/osso-core-config_200515.1_all.deb Size: 8518 MD5sum: 96017ccc68175fa26d91b8cf06719ea6 Description: Various common hacks for osso Starts Xomap, and sets up various stuff usually done is base-config (like inittab), etc. Most things here should eventually move to correct packages Package: osso-af-settings Priority: optional Section: libs Installed-Size: 12 Maintainer: Kimmo Hamalainen Architecture: all Version: 0.8.5-1 Recommends: osso-teema Filename: pool//maemo/ossw/o/osso-af-settings/osso-af-settings_0.8.5-1_all.deb Size: 1502 MD5sum: cc1bba3f5bbae90e3b381ba07b528f9d Description: Pkg-config settings for Hildon programs. Package: osso-af-startup Priority: required Section: base Installed-Size: 72 Maintainer: Kimmo Hämäläinen Architecture: all Version: 0.28-1 Depends: osso-af-utils, osso-core-config Filename: pool//maemo/ossw/o/osso-af-startup/osso-af-startup_0.28-1_all.deb Size: 7980 MD5sum: 378485ed6f8deeac5f95393aa6189063 Description: Application framework top startup scripts Application framework startup scripts af-services, af-startup and af-base-apps. Also includes D-BUS session bus starting script. These scripts are for the target only -- they won't work in Scratchbox. Package: osso-application-installer-l10n-engb Priority: optional Section: non-free/misc Installed-Size: 16 Maintainer: Marius Vollmer Architecture: all Source: osso-application-installer Version: 1.0.03-1 Filename: pool//maemo/ossw/o/osso-application-installer/osso-application-installer-l10n-engb_1.0.03-1_all.deb Size: 2812 MD5sum: 138a553a02c8d0a6333e0fc35503d05f Description: OSSO Application installer en_GB locale English locale for osso-application-installer. Package: osso-application-installer-l10n-src Priority: optional Section: non-free/misc Installed-Size: 48 Maintainer: Marius Vollmer Architecture: all Source: osso-application-installer Version: 1.0.03-1 Depends: gettext Filename: pool//maemo/ossw/o/osso-application-installer/osso-application-installer-l10n-src_1.0.03-1_all.deb Size: 5836 MD5sum: 1aae566841cf9e72f124709cdf3f4d54 Description: OSSO Application installer source packages Package: perl-modules Priority: standard Section: perl Installed-Size: 10600 Maintainer: Brendan O'Dea Architecture: all Source: perl Version: 5.8.3-3 Replaces: libpod-parser-perl, libansicolor-perl, libfile-temp-perl, libnet-perl, libattribute-handlers-perl, libcgi-pm-perl, libi18n-langtags-perl, liblocale-maketext-perl, libmath-bigint-perl, libnet-ping-perl, libtest-harness-perl, libtest-simple-perl Provides: libpod-parser-perl, libansicolor-perl, libfile-temp-perl, libnet-perl, libattribute-handlers-perl, libcgi-pm-perl, libi18n-langtags-perl, liblocale-maketext-perl, libmath-bigint-perl, libnet-ping-perl, libtest-harness-perl, libtest-simple-perl Depends: perl (>= 5.8.3-1) Conflicts: libpod-parser-perl (<< 1.14-1), libansicolor-perl (<< 1.07-1), libfile-temp-perl (<< 0.14-1), libnet-perl (<< 1:1.17-1), libattribute-handlers-perl (<< 0.78-1), libcgi-pm-perl (<< 3.01-1), libi18n-langtags-perl (<< 0.29-1), liblocale-maketext-perl (<< 1.06-1), libmath-bigint-perl (<< 1.68-1), libnet-ping-perl (<< 2.31-1), libtest-harness-perl (<< 2.40-1), libtest-simple-perl (<< 0.47-1) Filename: pool//maemo/ossw/p/perl/perl-modules_5.8.3-3_all.deb Size: 2166502 MD5sum: ba3f957d1a73dc44b8b7835fb28a480e Description: Core Perl modules. Architecture independent Perl modules. These modules are part of Perl and required if the `perl' package is installed. Package: po-debconf Priority: optional Section: devel Installed-Size: 192 Maintainer: Denis Barbier Architecture: all Version: 0.8.10 Depends: perl, gettext, intltool-debian (>= 0.30+20040211) Filename: pool//maemo/ossw/p/po-debconf/po-debconf_0.8.10_all.deb Size: 66336 MD5sum: 7fc17cee95c47a7420846e8032dc93d5 Description: Manage translated Debconf templates files with gettext This package is an alternative to debconf-utils and provide tools to manage translated Debconf templates files with common gettext utilities. Package: python Priority: standard Section: python Installed-Size: 516 Maintainer: Matthias Klose Architecture: all Source: python-defaults Version: 2.3.4-1 Replaces: python2.3 (<= 2.3.2-6), python-xmlbase Provides: python-email, python-xmlbase Depends: python2.3 (>= 2.3.4-1) Suggests: python-doc, python-tk Conflicts: python2.3 (<= 2.3.2-6), python2.1 (<= 2.1.2), python-xmlbase, python-csv, python-bz2 Filename: pool//maemo/ossw/p/python-defaults/python_2.3.4-1_all.deb Size: 125004 MD5sum: cdfacb9c8e774c575d9d0d8ee233a543 Description: An interactive high-level object-oriented language (default version) Python, the high-level, interactive object oriented language, includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. . This package is a dependency package, which depends on Debian's default Python version (currently v2.3). Package: libpango1.0-doc Priority: optional Section: doc Installed-Size: 1068 Maintainer: Sebastien Bacher Architecture: all Source: pango1.0 Version: 1.8.1-1osso1p1 Replaces: libpango0-dev, libpango-doc Depends: lynx | www-browser Suggests: libglib2.0-doc Conflicts: libpango-doc Filename: pool//maemo/ossw/p/pango1.0/libpango1.0-doc_1.8.1-1osso1p1_all.deb Size: 153338 MD5sum: fbfe35a76bb83b5765f31ff06406d9fa Description: Documentation files for the Pango Pango is a library for layout and rendering of text, with an emphasis on internationalization. Pango can be used anywhere that text layout is needed. however, most of the work on Pango-1.0 was done using the GTK+ widget toolkit as a test platform. Pango forms the core of text and font handling for GTK+-2.0. . Pango is designed to be modular; the core Pango layout can be used with four different font backends: - Core X windowing system fonts - Client-side fonts on X using the Xft library - Direct rendering of scalable fonts using the FreeType library - Native fonts on Microsoft backends . This package contains the HTML documentation for the Pango in /usr/share/doc/libpango1.0-doc/ . Package: libxproto-randr Priority: optional Section: libdevel Installed-Size: 88 Maintainer: Riku Voipio Architecture: all Source: randr Version: 1.0-1 Replaces: libxrandr-dev Filename: pool//maemo/ossw/r/randr/libxproto-randr_1.0-1_all.deb Size: 11318 MD5sum: 2f0e5dd38ceff557bbee662c8e4649b1 Description: X Resource Extension This package contains header files that provide the protocol definition of the Resource extension to X11 protocol. Package: libxproto-recordext Priority: optional Section: libdevel Installed-Size: 88 Maintainer: Riku Voipio Architecture: all Source: recordext Version: 1.0.1-1 Filename: pool//maemo/ossw/r/recordext/libxproto-recordext_1.0.1-1_all.deb Size: 5436 MD5sum: e3ce91645c0ed5344d5b68c87dca9034 Description: X Record Protocol TODO Package: render-dev Priority: optional Section: libdevel Installed-Size: 112 Maintainer: Riku Voipio Architecture: all Source: render Version: 0.8-6 Depends: x-dev Conflicts: xlibs-dev (<< 4.3.0) Filename: pool//maemo/ossw/r/render/render-dev_0.8-6_all.deb Size: 23762 MD5sum: 1419d0b183a40c0782ed70b516e6fe84 Description: X Resource Extension This package contains header files that provide the protocol definition of the Resource extension to X11 protocol. Package: ttf-bitstream-vera Priority: optional Section: x11 Installed-Size: 732 Maintainer: Michael Fedrowitz Architecture: all Version: 1.10-3 Depends: defoma Recommends: x-ttcidfont-conf | fontconfig Filename: pool//maemo/ossw/t/ttf-bitstream-vera/ttf-bitstream-vera_1.10-3_all.deb Size: 353678 MD5sum: 4872e1e039b1d550368e028b47e639a4 Description: The Bitstream Vera family of free TrueType fonts This is a set of high-quality TrueType fonts created by Bitstream, Inc. and released under a DFSG-free license. They are intended to remedy the lack of free high-quality fonts for the free desktop environments. . They fully cover Western European languages (ISO-8859-1, ISO-8859-15) and Turkish (ISO-8859-9). They also include a selection of mathematical and other symbols and some limited support for Eastern European languages (parts of ISO-8859-2). Non-latin scripts are not supported. Package: xlibs-data Priority: optional Section: libs Installed-Size: 792 Maintainer: Riku Voipio Architecture: all Source: x11 Version: 6.2.1-4.1 Replaces: xlibs (<< 4.3.0) Conflicts: xlibs (<< 4.3.0), xbase-clients (<< 4.3.0) Filename: pool//maemo/ossw/x/x11/xlibs-data_6.2.1-4.1_all.deb Size: 47786 MD5sum: d232884c85952c9800517ee8f0a233ea Description: X Window System client data This package provides architecture-independent data for the X Window System, including the locale data. Package: x-build Priority: optional Section: devel Installed-Size: 48 Maintainer: Riku Voipio Architecture: all Version: 6.5.2 Depends: autoconf, automake1.8, cdbs, debhelper (>= 4.1.88), pkg-config, libtool, binutils (>= 2.14.90.0.7) Suggests: cvs Conflicts: automake1.9 Filename: pool//maemo/ossw/x/x-build/x-build_6.5.2_all.deb Size: 2866 MD5sum: 64a1b7df2c3094b9f3ac851f1d327e6d Description: X build tools This package is a build dpency of the freedesktop debian packaging. It includes the generic depencies and and cdbs class file. This keeps the build-Depends: line and debian/rules simple and sweet. Package: xlibs-dev Priority: extra Section: oldlibs Installed-Size: 32 Maintainer: Riku Voipio Architecture: all Source: x-build Version: 6.5.2 Depends: libice-dev, libsm-dev, libx11-dev, libxext-dev, libxi-dev, libxpm-dev, libxrandr-dev, libxt-dev, libxtst-dev, libxv-dev, x-dev, libxsp-dev, libxau-dev Filename: pool//maemo/ossw/x/x-build/xlibs-dev_6.5.2_all.deb Size: 2340 MD5sum: d28c558f9d701870143ac254a160388e Description: X Window System client library development files pseudopackage This package smooths upgrades from Debian 3.0 by depending on libice-dev, libsm-dev, libx11-dev, libxext-dev, libxi-dev, libxmu-dev, libxmuu-dev, libxp-dev, libxpm-dev, libxrandr-dev, libxt-dev, libxtrap-dev, libxtst-dev, libxv-dev, pm-dev, x-dev, and xlibs-static-dev. This pseudopackage is only depended upon by packages that haven't yet corrected their dependencies to reflect the new library arrangement. Package: xlibs-static-dev Priority: extra Section: libdevel Installed-Size: 32 Maintainer: Riku Voipio Architecture: all Source: x-build Version: 6.5.2 Depends: x-dev, libxext-dev, libxv-dev, libx11-dev, zlib1g-dev | libz-dev, libc6-dev | libc-dev Conflicts: xdevel, xlib6g-dev (<< 4.0), xlib6g-static, xpm4g-dev, xmanpages, libxfont-xtt-dev Filename: pool//maemo/ossw/x/x-build/xlibs-static-dev_6.5.2_all.deb Size: 2210 MD5sum: baa7f24697b935f56af4ba5adfa08f90 Description: sundry X stuff TODO Package: xlibs-static-pic Priority: extra Section: libdevel Installed-Size: 32 Maintainer: Riku Voipio Architecture: all Source: x-build Version: 6.5.2 Replaces: xlibs-pic (<< 4.3.0) Depends: libxext-dev, libxv-dev, libx11-dev, libxau-dev, zlib1g-dev | libz-dev Conflicts: xlibs-pic (<< 4.3.0) Filename: pool//maemo/ossw/x/x-build/xlibs-static-pic_6.5.2_all.deb Size: 2188 MD5sum: b3fe019e05a5f42993087990ab69a93f Description: sundry X stuff TODO Package: xlibs Priority: optional Section: libs Installed-Size: 32 Maintainer: Riku Voipio Architecture: all Source: x-build Version: 6.5.2 Depends: libice6, libsm6, libx11-6, libxext6, libxi6, libxpm4, libxrandr2, libxt6, libxtst6, libxsp0, libxau0 Filename: pool//maemo/ossw/x/x-build/xlibs_6.5.2_all.deb Size: 2332 MD5sum: 544047fa4f7686338be9731efd2b763d Description: X Window System client libraries metapackage and XKB data This package smooths upgrades from Debian 3.0 by depending on the individual library packages into which each shared object formerly contained in this package has been split. . This package is only depended upon by packages that haven't yet been compiled against the new shared library packages. Package: x-dev Priority: optional Section: libdevel Installed-Size: 392 Maintainer: Riku Voipio Architecture: all Version: 6.6.2-1 Filename: pool//maemo/ossw/x/x-dev/x-dev_6.6.2-1_all.deb Size: 86276 MD5sum: 97bd125460444cfb35a5efe931fb5550 Description: X protocol development files Header files for the X protocol are provided by this package. . Note that headers specific to Xlib, a popular client-side implementation of the X protocol, are provided by the libx11-dev package. Package: libxproto-xextensions Priority: optional Section: libdevel Installed-Size: 588 Maintainer: Riku Voipio Architecture: all Source: xextensions Version: 1.0.2-1 Replaces: libxext-dev, libxv-dev, libxtst-dev, libxi-dev, xlibs-static-dev Filename: pool//maemo/ossw/x/xextensions/libxproto-xextensions_1.0.2-1_all.deb Size: 81204 MD5sum: a4626ccc7e548660ca9b79bc91d275e8 Description: Sundry X Extensions This package contains header files and documentation for various sundry X extensions. Library and server implementations are separate. Package: xml-core Priority: optional Section: text Installed-Size: 220 Maintainer: Debian XML/SGML Group Architecture: all Version: 0.07 Depends: perl, sgml-base (>= 1.17) Suggests: debhelper (>= 4.1.75) Filename: pool//maemo/ossw/x/xml-core/xml-core_0.07_all.deb Size: 18888 MD5sum: 5dbaf037cb46c98f35bc855dc3b7eb81 Description: XML infrastructure and XML catalog file support This package creates the XML infrastructure directories and provides XML catalog file support in compliance with the current Debian XML Policy draft: . * infrastructure directories: - /etc/xml - /usr/share/xml/{declaration,entities,misc,schema} - /usr/share/local/xml/{declaration,entities,misc,schema} . * XML catalog schema: OASIS XML Catalog Committee Specification 1.0 . * update-xmlcatalog(8): tool for maintaining the root XML catalog file and the package XML catalog files in the '/etc/xml' directory as well as local XML catalog files. . * dh_installxmlcatalogs(1): debhelper tool for installing local XML catalog files and registering XML entities in package XML catalog files and the root XML catalog file (requires debhelper package) Package: libxproto-xsp Priority: optional Section: libdevel Installed-Size: 68 Maintainer: Riku Voipio Architecture: all Source: xpext Version: 1.0-5 Filename: pool//maemo/ossw/x/xpext/libxproto-xsp_1.0-5_all.deb Size: 3396 MD5sum: 21db1de72707d3749aa8b01c105856bc Description: X S P This package contains header files that provide the protocol definition of the X S P extension to X11 protocol. Package: libxtrans-dev Priority: optional Section: libdevel Installed-Size: 352 Maintainer: Riku Voipio Architecture: all Source: xtrans Version: 0.1-2 Filename: pool//maemo/ossw/x/xtrans/libxtrans-dev_0.1-2_all.deb Size: 57442 MD5sum: cd6a1fc2a189903042eb62f77558c182 Description: X Transport headers Various headers and source files needed to build Xlib And X server from freedesktop.org.